Hi Mel Mine has never sweated but have never had one that was insulated looked to see if I could find one and nothing, you might try warmer water for tank or an in-wall system like KOHLER In-Wall Tank and Carrier System Model# K-6284-NA. Maybe someone else has had one that is insulated. Sweating is just from very cold water in a warm room, would check with a local plumber maybe they can help
Hi DieselDoc, yes just order American Standard Cadet 3 Powerwash Tall Height 2-piece 1.6 GPF Single Flush Elongated Toilet in Bone, Seat Not Included is Model# 270AA001.021
dandan, No, I am sorry but it will not. You would need to order tank ##4021.001N.020 for white and that will fit with your bowl 3717B.001.020. Sincerely, your American Standard Consumer Connection Team
The opening looks fine from your picture. You could try tighten the nut, but if it still leaks, maybe it's coming from the tank.
The outlet of this toilet goes through the floor. Sincerely American Standard Technical Team.
Please check your E-mail. It has been sent to you.
The dimensions are: Bowl Height without Seat (in.) 16.5 Flush Valve Size (in.) 3 Product Depth (in.) 28.5 Product Height (in.) 30.25 Product Width (in.) 17.25.
Yes, I installed the toilet and put a standard, elongated seat on it and it works fine.
We would normally recommend most liquid toilet bowl cleaners with a soft bristle brush. You want to stay away from abrasive cleaners such as soft scrub, scrubbing bubbles, bleach, etc.
The tallest height bowls are 16-1/2" without a seat. (for all models). We do not rate our toilets based on noise, but the only toilets we make with a 10" rough can be found at this link: https://www.americanstandard-us.com/bathroom/toilets?Where%20to%20Buy=Retail&Features=ADA%20Compliant&Height=Right%20Height&Rough-In=10%22&page=1&plimit=21