White Vinyl K-Style End Cap Set

Sealed the end of my gutter, very easy to install. Totally satisfied.

Everything Ameritex puts out to market these products implies that these end caps can attach to the Drop Outlet. However, if you read the instructions on their website you will find that these end caps do not actually attach to the Drop Outlet. Amerimax offers 2 options for using the Drop Outlet at the end of the gutter but both involved attaching the end cap to the gutter itself beyond the Drop Outlet. My preference is Option 2: run the gutter completely through the Drop Outlet so that it sticks out beyond the Drop Outlet just enough to attach this End Cap + allow expansion (expansion marks included in the Drop Outlet although the concept is not well explained). You then cut a hole in the bottom of the gutter over the outlet portion of the Drop Outlet to allow water to drain. In this configuration, the gutter will easily slide back and forth in the Drop Outlet. Therefore, the hole also slides back and forth as things expand and contract. Take this into consideration when deciding where to cut the hole. No, this isn't what I expected when I purchased the parts but it does work and does not leak. Although I did not try their Option 1, it involves cutting a short section of gutter to install between the Drop Outlet and the End Cap. I didn't like this option because the Drop Outlet does not have a seal with the gutter (even though they claim no caulking is needed). Caulking would seem to frustrate the products ability to expand and contract smoothly Note that Home Depot only has the traditional 2x3" downspouts but the Drop Outlet is the newer style with a square outlet. HD does not offer the square downspounts and there is no adapter but the square outlet will fit inside the 2x3 opening of the downspout or an elbow. Doesn't seem right but it does work.

Not meet our expectations. Product leave rainfall water pass thru the cap.

The cap set works very well with the vinyl gutters. I did not use it the conventional way. I used them for a vertical strawberry patch. I reinforced my wood fence Then cut the gutters the length I needed and attached them to the wood cross bars with screws and zip ties. I drilled holes in the bottom of the gutters for drainage . I filled them with dirt and planted my bare root strawberries. They are looking good. And it is nice looking also.

Easy to assemble ant the gutters work

It works great went up easy looks great

Nice tight seal on the matching Vinyl gutter material. We used a 10 foot section with these endcaps for a Cub Scout "rain gutter Regatta" - scouts built sail boats from foam and we ran them through the raceway! The nice thing about these end caps is that no additional sealant is needed: snap in place, and they're watertight.

gutters were easy to assemble and seem quite sturdy the onions should grow good and be up and easy to pick saves on garden space

We needed an outdoor paint/art station for our Pre-K students. We used 3 2 foot by 3 foot white boards and attached them to the windowsill. We then placed rain gutter at the bottom and stops on the ends to hold paint cups. Between the 2 classes we have just under 30 students. We are able to have six students painting at a time. We were able to create a wonderful outdoor activity center for under $75.00.

While the lengths of plastic gutter are cheaper than aluminum, the accessories (like these end-caps) are not. Time will tell if the plastic can hold up to the elements. Looks great and went up very easily. Cutting is simple.