Model # 6907984CP

Internet #202709900

0670750382680

Apollo

16-Port PEX Manifold with 1/2 in. Brass Ball Valves

  • A PEX manifold is like a a circuit breaker for plumbing
  • Features 8 Cold Water Outlets & 8 Hot Water Outlets
  • Economical and fast plumbing system
$ 208 03
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • A PEX manifold is like a a circuit breaker for plumbing
  • Features 8 Cold Water Outlets & 8 Hot Water Outlets
  • Economical and fast plumbing system
The ApolloPEX 16-Port PEX Manifold with 1/2 in. Brass Ball Valves is simple to install. Think of it as the circuit breaker for your water delivery system. The installation of an ApolloPEX manifold provides a single point flow control over each outlet. ApolloPEX manifolds are designed for implementation within home-run type PEX piping systems eliminating the need for additional fittings or connections between the water source and the point of use fixture. ApolloPEX manifolds are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX manifolds can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.
  • Single point of command and control of your residential/commercial potable water delivery or hydronic piping system
  • Allows for longer, continuous runs of PEX pipe with fewer connections
  • Most economical piping system available
  • Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
  • Meets UPC, IPC and cUPC standard
  • NSF listed
  • California residents see Prop 65 WARNINGS

Product Overview

  • A PEX manifold is like a a circuit breaker for plumbing
  • Features 8 Cold Water Outlets & 8 Hot Water Outlets
  • Economical and fast plumbing system
Model #: 6907984CP
Internet #: 202709900

The ApolloPEX 16-Port PEX Manifold with 1/2 in. Brass Ball Valves is simple to install. Think of it as the circuit breaker for your water delivery system. The installation of an ApolloPEX manifold provides a single point flow control over each outlet. ApolloPEX manifolds are designed for implementation within home-run type PEX piping systems eliminating the need for additional fittings or connections between the water source and the point of use fixture. ApolloPEX manifolds are a key component of the most economical potable water piping systems. Also capable of integration into hydronic heating systems, ApolloPEX manifolds can be secured into place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves (all sold separately). The ApolloPEX system is a comprehensive piping system comprised of brass fittings, poly alloy fittings, manifolds, valves, fasteners, tools and tubing designed for implementation in water delivery systems, simple or complex.

  • Single point of command and control of your residential/commercial potable water delivery or hydronic piping system
  • Allows for longer, continuous runs of PEX pipe with fewer connections
  • Most economical piping system available
  • Can secured in place using copper crimps, stainless steel pinch clamps or stainless steel crimp sleeves
  • Meets UPC, IPC and cUPC standard
  • NSF listed
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand Apollo Apollo Apollo Apollo
Name 12-Port PEX Manifold with 1/2 in. Brass Ball Valves 16-Port PEX Manifold with 1/2 in. Brass Ball Valves 20-Port PEX Manifold with 1/2 in. Brass Ball Valves 28-Port PEX Manifold with 1/2 in. Brass Ball Valves
Price
$172.44
$208.03
$293.75
$358.90
Ratings (15) (7) (6) (2)
Connection Barb Barb Barb Barb
View Product View Product View Product View Product

Specifications

Dimensions

Inlet Diameter (In.)
1/2
Outlet Diameter (In.)
1/2
Product Depth (in.)
3.375 in
Product Height (in.)
15.5 in
Product Length (in.)
15.5 in
Product Width (in.)
8.75 in

Details

Compatible Pipe Material
PEX
Connection
Barb
Features
Lead Free,Removable
Indoor/Outdoor
Indoor
Material
Brass
Maximum Pressure (psi)
200
Maximum Working Temperature (F)
200
Product Weight (lb.)
4.462 lb
Returnable
90-Day
Valve Type
Manifold

Warranty / Certifications

Manufacturer Warranty
5 Years: Must be installed per published installation instructions.

Specifications

Dimensions

Inlet Diameter (In.)
1/2
Outlet Diameter (In.)
1/2
Product Depth (in.)
3.375 in
Product Height (in.)
15.5 in
Product Length (in.)
15.5 in
Product Width (in.)
8.75 in

Details

Compatible Pipe Material
PEX
Connection
Barb
Features
Lead Free,Removable
Indoor/Outdoor
Indoor
Material
Brass
Maximum Pressure (psi)
200
Maximum Working Temperature (F)
200
Product Weight (lb.)
4.462 lb
Returnable
90-Day
Valve Type
Manifold

Warranty / Certifications

Manufacturer Warranty
5 Years: Must be installed per published installation instructions.

Questions & Answers

Are these expandable/stackable by connecting the 3/4 in line in series?

Are the 3/4 feeds permanently capped at the opposite end of the input or can you connect multiple manifolds?
Asked by: Joker
Thank you for posting the question. I wasn't sure of the answer, so I went into the utility closet and looked at it. There are two sets of four valves that make up the hot and cold sides. It appears that each of the sets of four are threaded at both ends, and are joined together by a F-F fitting. There is a cap at the opposite end and this would appear to be threaded so that you could add additional sets of four valves, presumably with additional purpose made female to female fittings, or with piping. I do not know, however, if the fittings are available. But here's the thing. Apparently while I wasn't looking, the utility closet has became the catch all for the brooms, mops, vacuum cleaner, buckets, et cetera, and whenever one of those items is used, the others get shoved up against the piping, stressing the fittings in the manifold. I now have a small leak on one of the hot side fittings where the broom handle has been banged into the manifold daily for the past 3 or 4 years. This is NOT a knock against the manifold. Water piping is simply not made to be bashed into with a broom handle every single day and I would not expect any plumbing to withstand such treatment. The point is, the connections are fragile. Plan your installation carefully. Make sure that all the pipes lead into and away from the manifold co-linear with the fittings so that there are no side stresses on them, and don't let family members turn the utility closet into a storage room or store things so they are bashing against the piping every day.
Answered by: lilrabbit
Date published: 2018-05-03

I want to confirm that this manifold is for use with Wisbol plastic pipe and not Shark Bite. Can you please confirm! Thx

Asked by: Mark
It actually shouldn't matter. Shark Bite and Wirsbo are both brand names for PEX, and there are others. The main thing is to decide which connecting system you want to use because the tools you need for making the connections are different. I spent quite a bit of time researching all of the PEX systems before I decided. Here's the executive summary: The Wirsbo system uses short lengths of PEX and an expensive (although you can rent it) tube expanding machine to stretch them over the tubing. Then you quickly connect the tube to your fitting and force the stretched tube over the end. The tool is expensive, but the fittings are almost free because you just use lengths of scrap tubing to make the connections. There are two other systems, clamp rings and crimp rings: Clamp rings use a hand held pliers device to lock down mechanical clamps that are like hose clamps. The clamp rings have locking teeth that engage when you have properly closed the connection. They give a satisfying "click" to let you know that you have a secure fitting. Each size of pex pipe uses a different size clamp ring, but you only need one tool to clamp down the rings. I chose this system because the rings are "go/no-go". They either clamp down properly and you have a perfect joint, or they won't clamp up and you know that you need to redo it. The other system uses "crimp rings". The crimp rings are cheaper than the clamps, but you need a special tool for each size of pipe that you will use. Also, you have to take care to crimp the rings properly. I am told that you quickly develop a "feel" for whether or not you have made a good connection, but I didn't trust my judgment. Although the clamps were a few cents more expensive than the crimp rings, I felt I more than made up the difference because I didn't need to buy and carry multiple crimping tools. Also, in use I felt really confident that I had correctly connected my piping and several years later, I still think I made the right choice. I rejected the expansion tube system because the battery operated tool was going to cost me several hundred dollars whereas I only spent about 20 on the clamp tool.
Answered by: lilrabbit
Date published: 2018-04-29
  • y_2019, m_5, d_24, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202709900, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 144ms
  • QUESTIONS, PRODUCT

Customer Reviews

16-Port PEX Manifold with 1/2 in. Brass Ball Valves is rated 3.3 out of 5 by 7.
Rated 5 out of 5 by from Complete Kit, Well Made, Easy to Install Plumbing has always been my least favorite of the tasks in a remodeling project, but so far, I am having fun. This well made manifold is well worth the money and has made the plumbing project easy and relatively fun. Unfortunately my house is suffering from old, poorly installed, and now leaking copper piping. After years of believing that copper pipe is the only way to go, I find myself living in a place where apparently the water attacks copper. Who knew? I wonder what it is doing to my stomach? Anyway, I am in the process of slowly replacing all of the copper pipe with PEX, and with this manifold at the heart of the system, the job has been easy so far. I used Shark Bite "tees" to cut the manifold into the existing system in my utility closet, right at the water heater. I then began running "home runs" from the manifold to each plumbing fixture in the house. I started with the fixtures furthest from the manifold. As I complete each portion of the new runs, I am able to cut out the old copper pipe and cap off the old system using a couple of Shark Bite caps which I discovered can be easily removed and re-installed. This manifold and the Shark Bite caps allow me to do one or two fixtures at a time while only disrupting the water to the rest of the house for a couple of minutes. This means I have been able to work on the project for a few hours each weekend as time permits. I have not had to shut down the house and do the entire job in an exhausting marathon. I am slowly and carefully working back toward the meter, cutting out the old copper and taking it in for recycling as I go. My only frustration with this manifold was that the product description was a bit sparse. It does comes complete with adapters to connect to 3/4 Pex supply lines. There are, as expected, 16 stop-cocks, and there are also four caps that can be used to cap off unused ports. The package included a couple of brass bushings and some O-rings. There was no obvious place to install the bushings or O-rings and since everything is working fine and there are no leaks, I cannot fathom their purpose. It would have been nice if the manufacturer had included a description of the included parts and their purpose, although mostly this is obvious. I will end up using all 16 ports when the project is done, so I installed all of the stop-cocks and then wrapped each unused one with plastic wrap and a couple of turns of electrical tape to keep them free of debris while work is pending. I don't know if this is necessary, but it may be another two years before I completely finish the project, so I thought this would be safer. The individual stop-cocks can be connected to the manifold either before, or after you connect them to the home run lines. This is nice for me because I will need to relocate my manifold when I complete the last phase of my project. The last phase will be the replacement and relocation of the hot water heater in a new utility room and running a new main supply line back to the inlet and main shut-off. To facilitate this, I added an extra ten feet of PEX to each home run. It will be easy to shorten this up once I relocate the manifold. I am looking forward to a neat, clean and well labeled plumbing system once all is done.
Date published: 2012-04-17
Rated 2 out of 5 by from This product is made of cheap plastic and we couldn't get it to stop leaking Upon installation of this product and putting water on the system, 4 out of the 16 valve connections were leaking and we couldn't get them to stop. We didn't want to tighten the connections more for fear of breaking the cheap plastic. We ended up removing the manifold and making our own system out of the all-copper manifolds that are available. I would avoid purchasing this product.
Date published: 2013-03-28
Rated 5 out of 5 by from Best Purchase This unit made it very easy to remodel and update our water lines. Good bye PVC. We would recommend it to anyone remodeling or even on a new build.
Date published: 2015-03-10
Rated 4 out of 5 by from Worked great. Don't worry about the plastic manifold. Only... Worked great. Don't worry about the plastic manifold. Only downfall I see is it will be hard to remove valves once they are install.
Date published: 2018-03-13
Rated 4 out of 5 by from Best One Out There Versatile but plastic construction appears potentially a bit weak. I have only energized 2 stations of 16, but so far, so good. Very easy to attach PEX, and the valves all are water tight so far. In partial operation x 1 mo so far during a major remodel. A bit pricey for the construction but best option out there.
Date published: 2016-08-03
Rated 2 out of 5 by from not built to last I returned this item because I did not fill like it would last
Date published: 2011-10-29
Rated 1 out of 5 by from Item is depicted much nicer and heavy duty in ... Item is depicted much nicer and heavy duty in the picture. The item I received felt very "cheesy" I will be returning this manifold.
Date published: 2017-03-15
  • y_2019, m_5, d_23, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_, sid_202709900, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 130ms
  • REVIEWS, PRODUCT