Internet #301458076

Model # 41051-3

AquaPro

3/4 HP Sewage Pump with Piggyback Tethered Float Switch

$ 268 20

Overview

The AquaPro 3/4 HP Sewage Pump is constructed of rugged cast iron. It has the capability of pumping up to 14,000 GPH at 0 ft. of lift, and 9,600 GPH at 10 ft. of lift. It has a maximum lift of 23 ft. It is supplied with a piggyback tethered float switch for automatic or manual operation. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is manufactured with ball bearings for quiet operation. It also has a PSC, energy-efficient motor with automatic thermal overload protection. The unit has a 2 in. NPT discharge, and supplied with a 10 in. power cord. It also has a 3-year warranty.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

The AquaPro 3/4 HP Sewage Pump is constructed of rugged cast iron. It has the capability of pumping up to 14,000 GPH at 0 ft. of lift, and 9,600 GPH at 10 ft. of lift. It has a maximum lift of 23 ft. It is supplied with a piggyback tethered float switch for automatic or manual operation. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is manufactured with ball bearings for quiet operation. It also has a PSC, energy-efficient motor with automatic thermal overload protection. The unit has a 2 in. NPT discharge, and supplied with a 10 in. power cord. It also has a 3-year warranty.
  • Professional grade rugged cast iron construction maximizes pump life
  • High output performance pumps up to 14000 Gallons per hour
  • Energy-efficient PSC motor
  • Ball bearings for long life-quiet operation

Product Overview

Model #: 41051-3
Internet #: 301458076

The AquaPro 3/4 HP Sewage Pump is constructed of rugged cast iron. It has the capability of pumping up to 14,000 GPH at 0 ft. of lift, and 9,600 GPH at 10 ft. of lift. It has a maximum lift of 23 ft. It is supplied with a piggyback tethered float switch for automatic or manual operation. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is manufactured with ball bearings for quiet operation. It also has a PSC, energy-efficient motor with automatic thermal overload protection. The unit has a 2 in. NPT discharge, and supplied with a 10 in. power cord. It also has a 3-year warranty.

  • Professional grade rugged cast iron construction maximizes pump life
  • High output performance pumps up to 14000 Gallons per hour
  • Energy-efficient PSC motor
  • Ball bearings for long life-quiet operation

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Key Features

Product Overview
Key Features
The AquaPro 3/4 HP Sewage Pump is constructed of rugged cast iron. It has the capability of pumping up to 14,000 GPH at 0 ft. of lift, and 9,600 GPH at 10 ft. of lift. It has a maximum lift of 23 ft. It is supplied with a piggyback tethered float switch for automatic or manual operation. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is manufactured with ball bearings for quiet operation. It also has a PSC, energy-efficient motor with automatic thermal overload protection. The unit has a 2 in. NPT discharge, and supplied with a 10 in. power cord. It also has a 3-year warranty.
  • Professional grade rugged cast iron construction maximizes pump life
  • High output performance pumps up to 14000 Gallons per hour
  • Energy-efficient PSC motor
  • Ball bearings for long life-quiet operation

Product Overview

Model #: 41051-3
Internet #: 301458076

The AquaPro 3/4 HP Sewage Pump is constructed of rugged cast iron. It has the capability of pumping up to 14,000 GPH at 0 ft. of lift, and 9,600 GPH at 10 ft. of lift. It has a maximum lift of 23 ft. It is supplied with a piggyback tethered float switch for automatic or manual operation. The non-clogging vortex impeller is designed to handle up to 2 in. solids. The unit is manufactured with ball bearings for quiet operation. It also has a PSC, energy-efficient motor with automatic thermal overload protection. The unit has a 2 in. NPT discharge, and supplied with a 10 in. power cord. It also has a 3-year warranty.

  • Professional grade rugged cast iron construction maximizes pump life
  • High output performance pumps up to 14000 Gallons per hour
  • Energy-efficient PSC motor
  • Ball bearings for long life-quiet operation

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand AquaPro AquaPro Everbilt AquaPro
Name 1/2 HP Submersible Sewage Pump with Piggyback Tether Float Switch 1/2 HP Sewage Pump with Piggyback Tethered Float Switch 1/2 HP Sewage Pump 3/4 HP Sewage Pump with Piggyback Tethered Float Switch
Price
$152.09
$197.10
$249.30
$268.20
Ratings (28) (10) (104) (14)
Housing Material Cast-Iron Cast-Iron Cast-Iron Cast-Iron
Discharge Flow @ 0 ft. (gallons/hour) 6500 9000 7800 14000
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
9.2 in
Product Height (in.)
14.9 in
Product Width (in.)
12.6

Details

Actual Solids Capacity
2 in.
Amperage (amps)
10.5 A
Cord Length (ft.)
10
Discharge Flow @ 0 ft. (gallons/hour)
14000
Discharge Flow @ 10 ft. (gallons/hour)
9600
Features
No Additional Features
Housing Material
Cast-Iron
Maximum Horsepower (hp)
.75
Maximum Working Temperature (F)
131
Minimum Sump Diameter
18 or More
Minimum working temperature (F)
32
Outlet Connection
Threaded female
Power Type Required
AC
Product Weight (lb.)
52.14 lb
Pump Switch Type
Tethered
Returnable
90-Day
Voltage
115v

Warranty / Certifications

Certifications and Listings
CSA Listed
Manufacturer Warranty
3 Years

Specifications

Dimensions

Product Depth (in.)
9.2 in
Product Height (in.)
14.9 in
Product Width (in.)
12.6

Details

Actual Solids Capacity
2 in.
Amperage (amps)
10.5 A
Cord Length (ft.)
10
Discharge Flow @ 0 ft. (gallons/hour)
14000
Discharge Flow @ 10 ft. (gallons/hour)
9600
Features
No Additional Features
Housing Material
Cast-Iron
Maximum Horsepower (hp)
.75
Maximum Working Temperature (F)
131
Minimum Sump Diameter
18 or More
Minimum working temperature (F)
32
Outlet Connection
Threaded female
Power Type Required
AC
Product Weight (lb.)
52.14 lb
Pump Switch Type
Tethered
Returnable
90-Day
Voltage
115v

Warranty / Certifications

Certifications and Listings
CSA Listed
Manufacturer Warranty
3 Years

Questions & Answers

Can this be used to empty a in-ground swimming pool? Is it Submersible?

Can this be used to empty a in-ground swimming pool? Is it Submersible?
Asked by: ssmama
Yes it is submersible. It can empty a pool as long as it is less than 23 feet deep. Also, the cord might not be as long as your pool is deep so you might need to start the pump shallower than the bottom and move it down with the water level. This will prevent water from contacting the live extension cord and causing an electrocution hazard.
Answered by: Eric
Date published: 2018-06-22

If I run water discharge through 150 Ln. Ft. of 1/2" hose what PSI rate dose this pump at. How ...

If I run water discharge through 150 Ln. Ft. of 1/2" hose what PSI rate dose this pump at. How many gallons per minute / hour does it pump at with the same hose attached?
Asked by: JohnnyJohn
This pump is rated to discharge 14,000 gallons per hour at 0' lift through a 2' outlet. That is 233 gallons per minute. Pushing a 2" flow into 1/2" pipe/hose would put unacceptable pressure on the system, even if the pipe is horizontal (no lift). Any lift, i.e. pumping to a point above the pump, would add significant pressure to the system. This is overkill for the application you described. However, if you were to use 2" piping the whole way, Schedule 40 PVC would handle the pressures easily, whether it is to move the fluid horizontally or vertically. If you have to use 1/2" hose, you should use a smaller pump with a 1/2" outlet.
Answered by: Eric
Date published: 2018-02-21

Tether float switch does not work

Upon removal of 'Rear' plug from tether and inserting plug into separate outlet then the pump works but the motor remains running. Any suggestions? New pump. Hooked up April 2019.
Asked by: MarindaS
Hi MarindaS, Please call our professional customer technical support at 844-241-5521 and we will be happy to troubleshoot the issue with you. Thanks!
Answered by: GPPumps
Date published: 2019-05-13

How well does this work as a grinder sewage pump? Needs to pump up hill for approx 100 ft.

Asked by: Rsy
Pumping 10ft well. No problems except with tether switch.
Answered by: Novice
Date published: 2019-05-13
  • y_2019, m_8, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_301458076, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 48ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 HP Sewage Pump with Piggyback Tethered Float Switch is rated 4.3 out of 5 by 14.
Rated 5 out of 5 by from I had a professional install it. Seems to be working... I had a professional install it. Seems to be working with no problems. Very quiet.
Date published: 2019-06-29
Rated 2 out of 5 by from Renovating Basement. Bought in January 2019. Hooked up to plumbing by April 2019. Found pump n... Renovating Basement. Bought in January 2019. Hooked up to plumbing by April 2019. Found pump not pumping when using tether switch but upon removal of rear plug into independent outlet pump worked fine but then motor kept running. Company sent replacement but still need to hook up . Will post another review.
Date published: 2019-05-13
Rated 5 out of 5 by from This is a real beast. Definitely worth the extra money to get the unit with the longer warranty.... This is a real beast. Definitely worth the extra money to get the unit with the longer warranty. Don't wait to pull your old unit out to decide on that. This is a cast iron pump that is really built. I was pleasantly surprised to see it had such good fit and finish on a big item, especially since I had gotten some other cast iron items recently that were not so good. The power cords are 10 feet long. Plenty long to fit in the area where I was installing this pump. It pretty looks the same as the pump I was replacing, so that was nice to see.
Date published: 2017-11-17
Rated 5 out of 5 by from I am using this pump to transfer water from the spring that supplies my farm to storage tanks. It... I am using this pump to transfer water from the spring that supplies my farm to storage tanks. It moves a very large quantity of water in a very short time. I am very impressed with the quality of this pump. It is constructed of a very heavy solid cast iron. In my application, using it to pump from a spring, it should last pretty much forever as far as corrosion is concerned. If it was being used as a sewage pump the heavy cast iron would be even more important since sewage is so corrosive. The motor itself is oil filled which helps keep water from entering the motor housing and causing corrosion or electrical problems. For my use the tethered float is essential. My spring produces a lot of water in the winter but the production slows down in the summer. The float switch allows me to leave the pump hooked up and when the water level rises the pump comes on and when the level drops it shuts itself off. No chance of having the pump burn out due to running dry. The extra long cords are a real advantage at my spring since I can get the plugs well up and out of the area that gets wet. All in all this is a very nice and functional pump, just perfect for my system.
Date published: 2017-11-22
Rated 4 out of 5 by from The only negative thing about this pump is that it requires a 20 amp breaker.. other than that...... The only negative thing about this pump is that it requires a 20 amp breaker.. other than that... it is a very good and strong pump. should last for many years.
Date published: 2018-02-08
Rated 1 out of 5 by from It arrived and didn't work. So I had to return it. It arrived and didn't work. So I had to return it.
Date published: 2017-11-28
Rated 5 out of 5 by from These can get expensive but they're well worth it when you consider the abuse they take, the job ... These can get expensive but they're well worth it when you consider the abuse they take, the job they're really doing, and how long they last. My previous one lasted nearly 10 years, and the only reason I replaced it with this was peace of mind. It likely would have lasted longer but why chance it for what averages out to about $30 a year. Instructions are detailed and installation was pretty straightforward, took about an hour with cutting some new pipes to replace the old, and installing a new check-valve at the same time. Operation is quiet, and I prefer the mechanical float over electronic sensors of other pumps. Has a very solid feel to it, looks well made, and so far in the nearly 3 months have had no issues.
Date published: 2018-01-08
Rated 4 out of 5 by from Have not installed it. it is used to transfer... Have not installed it. it is used to transfer water out of a central area storm drain
Date published: 2017-10-28
  • y_2019, m_8, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_, sid_301458076, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 7ms
  • REVIEWS, PRODUCT