#1 Home Improvement Retailer

Internet #312928119

Model #960050

Store SKU #1005256243

Store SO SKU #1006032513

RibbonFlex Aluminum LED Tape Light Flat Channel and Diffuser System Mounting Hardware (5-Pack)

  • Made with durable, high-quality aluminum
  • Ideal for installations where the lighting will be visible
  • 39 in. channels can be cut to length
  • View More Details
How to Get It
Easy Returns In Store and Online
Read ourReturn Policy

Frequently Bought Together

Best Seller



Product Depth (in.)
39.02 in
Product Height (in.)
.27 in
Product Width (in.)
.63 in


Accessory Type
Mounting Hardware
Color Family
Hardware Included
Number in Pack
Product Weight (lb.)
2.2 lb

Warranty / Certifications

Certifications and Listings
No Certifications or Listings
Manufacturer Warranty
2 Year Limited

Product Overview

The channel is made from high quality, double-anodized, aviation-grade aluminum alloy and available in 2 profiles, flat and angled. It can be fitted with the included frosted polymer cover to conceal the LEDs and diffuse the light output. The channels are useful for installations in which the lighting will be visible, such as on the underside of a shelf or in a display cabinet, or to soften lighting to eliminate reflective hot spots on a nearby surface. The channels can be cut to length using a fine-tooth handsaw and run in sequence to create a longer fixture. The channel can be mounted to surfaces with the use of double-sided adhesive tape or included mounting brackets. The mounting bracket guarantees easy and secure mounting to the desired surface. It can also be used as a connector between channels.
  • Channels are an attractive way to complete a professional LED tape light strip installation. Conceal and protect LED tape light strips.
  • 5 pack of 39 in. channels, diffusers and hardware, 16 ft. total length
  • Made from durable, high-quality aluminum
  • Flat profile for surface or recessed installations, corner profile for 45° directional lighting
  • Includes translucent diffuser to soften the light output and eliminate LED hotspots
  • Includes mounting hardware and end caps
  • Can be cut to length
  • 5 pack of 39 in. channels, diffusers and hardware, 16 ft. total length
  • Return Policy

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Get 10% off your purchase

Sign up for emails & save 10% on select home decor. Valid on select items.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.5
    out of 37 reviews
  • 88%recommend this product
Filter by:
Showing 1-10 of 37 reviews
The channel/diffuser system was exactly what I needed for the Armacost LED tape light in areas wh...
The channel/diffuser system was exactly what I needed for the Armacost LED tape light in areas where the tape light could be seen, such as inside my overhead cabinet that has glass doors. I was able to cut it easily to the exact size that I needed. Mounted with double sided tape for a cleaner look.
  • Verified Purchase
  • Recommended
4 people found this helpful
Excellent quality and helps protect the LED strip.
I used all 5 pieces (5 meters) to go around on the inside closet door way. The bathroom closet has five shelves and with the LED strip on the wall from 8 inches off the floor to 6 feet up, then 1 meter over the door, another 2 meters down the wall, it'd be easy for the strip to be banged into causing damage. I have Armacost LED tape installed under the kitchen cabinets without this product. If you have a highly reflective backsplash or granite top, each LED gets reflected off the surface and at certain angles it is a bit annoying. This diffuser spreads the light and minimizes those bright spots. What was concerning was as you peel the 3M tape off the backing, every three LED is a copper connector. It is where you cut the tape to length. The back part of the LED tape also shows these copper strips. It turned out and it is not mentioned, the the sticky part of the tape that remain the the strip insulates the 12v connector. I check the aluminum rails with an ohm meter and I could not get a reading. There must be a coating on the aluminium. The plastic lens snaps into place.
    • Recommended
    6 people found this helpful
      This worked fairly well for putting in tracks for the...
      This worked fairly well for putting in tracks for the led tape lighting. Getting the diffuser set into it and clipping the track into the clips could be pretty tricky. It diffuses the reflection of the led tape lights somewhat - definitely worth it to me, but you will still be able to see the individual lights. Overall pretty happy, but they are tricky to install. Would love more clips and screws to come with them.
        Good Channel System for LED Strips
        For the most part the parts were well made and fit together, though I would've given 5 stars if I didn't have to straighten out some of the channels - overall good for the price though.
        • Verified Purchase
        • Recommended
          Great product and installed easily on my enclosed porch beams,...
          Great product and installed easily on my enclosed porch beams, then just stuck the LED strip to the track and popped on the diffuser. Great look. Liked it so much I purchased a second set.
            If your looking for good diffuser keep looking.
            The aluminum ribs are great the defuser no so good. Hot spots very noticeable
            • Verified Purchase
            Works perfect. Easy to install and customize....
            Works perfect. Easy to install and customize.
              These are well made and compact. Easy to cut...
              These are well made and compact. Easy to cut to the specific length needed. The covers are a tad brittle when cutting. Only two problems were: 1. The stainless steel clip are not easy to snap onto track due to the mounting screw protruding a bit; keeping the extrusion from fully seating. But push and squeeze a bit and they will snap in place. Have not had any come loose since installation. 2. The plastic end-caps that wire passes through do not hold in place all that well, but once installed, should not be a problem. Overall these are a great compliment to the Armacost LED strips. My kitchen cabinet installation is far better off for having used these tracks and diffusers.
              • Verified Purchase
              Showing 1-10 of 37 reviews