#1 Home Improvement Retailer

Internet #203227243

Model #RF3528060-12WWD

Store SKU #592412

RibbonFlex Pro 60/800 12 ft. Soft Bright White (3000K) Under Cabinet LED Tape Light

  • Highly rated for performance and design (see reviews)
  • Lights bookcases, under, over and inside cabinets and more
  • Fully dimmable with standard dimmers and wireless controls
  • See More Details

Product Overview

Beautifully enhance any space with dramatic, architectural-quality, designer-style indirect lighting. Fully dimmable and designed to cast a seamless glow, RibbonFlex Pro creates warm and relaxing environments or delivers bright task lighting. Use under, over and inside cabinets and above counter areas. Light up coves, tray ceilings and architectural elements. Illuminate shelving, bookcases and display cabinets. Low-voltage safe, RibbonFlex Pro requires a 12-Volt DC power supply (sold separately).
  • A 12-Volt DC LED power supply is required, sold separately; depending on length requirements, choose THD item #204512712 (6-Watt), # 204512734 (15-Watt), #203227252 (30-Watt) or item #203227258 (60-Watt), download installation guidelines to determine your LED power supply needs
  • Each package contains 12 ft. of LED tape lighting, 2 LED tape light connectors, one 48 in. pre-installed power wire, 2 wire support clips and installation guidelines
  • For RV and boat interiors, tape lighting can be powered directly by a 12-Volt battery, AC/DC power supply not required
  • 12 ft. section includes 219 high-brightness LEDs, approximately 18 LEDs per feet (60 LEDs per meter), 1535 total Lumens light output
  • 3000K color temperature, highly efficient, rated for 50,000 hours, longer when dimmed
  • CSA listed, conforms to UL standard 8750MFG, class 2 NEC compliant
  • Fully dimmable with both low voltage and standard AC dimmers when used with an appropriate power supply
  • Shop all LED Strip Lights here.



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar LED Strip Lights

RibbonFlex Pro 16.4 ft. LED Tape Light 60 LEDs/m Soft Bright White (3000K)
current product
RibbonFlex Pro 60/800 12 ft. Soft Bright White (3000K) Under Cabinet LED Tape Light
RibbonFlex Pro 32.8 ft. 12-Volt White Tape Strip Light 60 LEDs/m Soft White (2700K)32.8 ft. LED Tape Light 120 LEDs/m Soft White (2700K)
BrandArmacost LightingArmacost LightingArmacost Lighting
NameRibbonFlex Pro 16.4 ft. LED Tape Light 60 LEDs/m Soft Bright White (3000K)RibbonFlex Pro 60/800 12 ft. Soft Bright White (3000K) Under Cabinet LED Tape LightRibbonFlex Pro 32.8 ft. 12-Volt White Tape Strip Light 60 LEDs/m Soft White (2700K)32.8 ft. LED Tape Light 120 LEDs/m Soft White (2700K)
Price
Ratings
(326)
(326)
(18)
(0)
Power SourceHard WiredHard WiredHard WiredHard Wired
Product Length (in.)196.8144393.6393.6
LinkabilityConnectable,CuttableConnectable,CuttableConnectable,CuttableConnectable,Cuttable
FeaturesBulb Included,DimmableDimmableBulb Included,DimmableBulb Included,Dimmable
Voltage (v)12v12v12v12v
Damp/Wet RatingDry RatedDry RatedDry RatedDry Rated
Mounting Method2-Sided Tape,Adhesive2-Sided TapeAdhesiveAdhesive
Compatible Bulb TypeLEDLEDLEDLED
Connection TypeHardwiredHardwiredHardwiredHardwired
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
0.31
Product Length (in.)
144

Details

Actual Color Temperature (K)
3000
Bulb Color
Clear
Color Temperature
Warm White
Color/Finish Family
White
Compatible Bulb Type
LED
Connection Type
Hardwired
Damp/Wet Rating
Dry Rated
Features
Dimmable
Fixture Color/Finish
White
Fixture Color/Finish Family
White
Fixture Material
Plastic
Hardware Included
Yes
Linkability
Connectable,Cuttable
Linkable
Yes
Lumens
2000
Mounting Method
2-Sided Tape
Package Quantity
1
Power Source
Hard Wired
Product Weight (lb.)
0.406
Replaceable LED Module
No
Returnable
90-Day
Slim line
Yes
Tape Light Length (ft & in)
12ft
Voltage (v)
12v
Watt Equivalence
60

Warranty / Certifications

Certifications and Listings
CSA Listed
Manufacturer Warranty
Limited 3 year

Questions & Answers

134Questions11Answers

Is there a way to staple this to the cabinet. Most of these don’t stick well and fall after a few...

Asked by Handyman April 25, 2021
2
Answers

All staples are metal and it would be very difficult not to cause a short or damage to the tape. The problem maybe the wood is bleeding a little oil or originally there was a layer of dirt and oil/grease from cooking. It doesn't take much and the surface may have feel clean. A remedy is use double sided stick tape. First clean the surface with alcohol, attach the double side tape first to the surface. It doesn't have to be a continuous run so you can leave gaps. Then remove the paper side of the tape and place the ribbon led tape on top of it. When handling led tape or double sided stick tape try not to touch the sticky side of it as much as possible with your fingers. Oil and dirt from your hands will contaminate and coat the glue preventing a good adhesion. It's not always possible but just be careful. Most double sided tapes are 1" and 3/4" wide. There is 1/2" wide tape availability but usually is a little more difficult to find. You want 1/2" since it wouldn't needed any trimming. I have a roll of it by 3M but I could not find it online using the HomeDepot APP but may be at your store. In my home I have over 50 ft of tape stuck to walls and cabinets and not once has any of the led tape failed.

What size driver do i need for the 32.8 led tape?

Asked by Alfred April 5, 2021
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO. It is important to note that this product should not be one continuous 32.8' run, otherwise there will be voltage drop resulting in inconsistent lighting. For best results, run two 16.4 runs. A 16.4' run draws 28 Watts. If you want to run all 32.8' from one driver, it needs to be rated at least 60W. For best results use Armacost Lighting model 840600.

Without saying go to another website, How many watts per foot is this 60 LED/meter tape?

Asked by Shingle March 14, 2021
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO. Watts used per foot depends upon lighting configuration and length of tape light used. A 16.4' straight run of 60 LED/meter tape light will use 28 watts.

Do I need a transformer if I'm hard wiring this?

Asked by Bertha11 March 10, 2021
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO. Yes you need a transformer to hardwire this product. It is 12V DC. For best results, utilize Armacost Lighting transformers, model 840450 is quite popular and well regarded.

Why can't I find the width of the tape in the specs? Doesn't anyone think this is important info...

Asked by NomadMac January 11, 2021
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO. There is not a clean spec selection for this, so it is identified as depth which is noted at 0.31".

Can you use a Lutron style dimming switch with this instead of the remote?

Asked by Kat November 18, 2020
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO. This product will not work properly with a dimmable switch on the AC side. If you wish to utilize a Lutron style switch, you will need to build a system with components such as a universal driver and tape light. Or you can use the RibbonFlex home kit model 421502.

Can this LED Light be used to light under stairs? and can a sensor be installed/added to this kit?

Asked by RICARDO November 10, 2020
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO LED Strip light kit. This light can be used to light under stairs. Generally speaking, one could pair an on/off sensor with the kit as each time it is powered on it retains its previous setting. Occasionally it will reset and those times will need to use the remote to power it on.

is product with splice I'm trying to do a kitchen with few separate sections

Asked by fredy October 13, 2020
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex home. The 8', 12', 16' and 20' kits include 1 wire lead and 1 splice connector. If you need more connectors, consider purchasing these - https://www.homedepot.com/p/Armacost-Lighting-White-RibbonFlex-Pro-SureLock-LED-Tape-Light-Connector-with-Wire-567000/205927566

Say I've got a kitchen area that I want about 10 ft of light strip on one side and then I've got ...

Asked by smolloy September 16, 2020
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO. It sounds as if you should use an 'array' execution with each of the legs coming out of one power supply, with that power supply connected to the circuit that the switch runs. Be sure that you use a power supply with AC dimmable capability. It is a little difficult to answer your question so you may wish to reach out to our customer support team at support@armacostlighting.com.

What is the wire guage?

Asked by Nick August 19, 2020
1
Answer

Thanks for your interest in Armacost Lighting RibbonFlex PRO. This comes with 20AWG wire.

RibbonFlex Pro 60/800 12 ft. Soft Bright White (3000K) Under Cabinet LED Tape Light - page 2

Customer Reviews

  • 4.7
    out of 326 reviews
  • 96% recommend this product
Filter by:
Showing 1-10 of 326 reviews
Easy to install and has a warm natural glow....
Easy to install and has a warm natural glow.
by Kspoon
It was the perfect item that is reasonably priced and...
It was the perfect item that is reasonably priced and which arrived on time for our job.
by CoastalFloors
This strip light quickly went from, "What am I going to do with this" to"How did I ever do withou...
This strip light quickly went from, "What am I going to do with this" to"How did I ever do without it"? Checking it out on the bench, it seems sturdy, well made and versatile! You can cut it, make smaller sections of light or add another strip. At full brightness, it draws a mere 20 watts. You can adjust the brightness down to 2 watts. It can play a stobe light show, so I wouldn't put it in a vacation rental, it would drive your guests nuts! In considering where to install it, I considered using it for indirect lighting above an entertainment center, a head board structure above our bed or above the indoor hot tub, The answer was at my workbench: It was lit with 2 8 foot long lights, drawing a total of 160 watts! I replaced it with this strip light and am saving 140 watts!
by SFBill
2 people found this helpful
I used this under my cabinets in my kitchen and they are amazing! I had no issues with flickering...
I used this under my cabinets in my kitchen and they are amazing! I had no issues with flickering or humming like I've experienced with other LED lighting.
by Shifty
1 person found this helpful
Installation of the LED strip took me longer to install beginning with wanting an accessory to st...
Installation of the LED strip took me longer to install beginning with wanting an accessory to string under the microwave so the LED's would not light the stove. Maybe that was a mistake, but I bought the wrong wires, and the clip used to connect the end of the wire. I included an image of the right ones. I had trouble with the install. You can cut the led strip to length, but the small wires that connect to the piece, those clips are an absolute pain to get on correctly. They pinched the cable and kept coming open. You are working under the cabinet, and the clip comes off after you stuck it to the back wall. I had some small wire holders leftover from a garage door installation, so I used them to hold the wires in place where the two cabinets come together. I also opened the electrical converter so I could drill my holes in the cabinets the width of the wire, and not the width of the plug. I also cut the 110 cord to length instead of having a bunch of rolled-up wire. Looks much more professional. Note: I had to buy a small #1 Phillips screwdriver for the converter box to get to the screws. When done it looks nice and my wife sure likes it. The remote works anywhere I put it so I am going to double face tape it to the side of the microwave. I’m happy with the product but keep in mind, it is not the easiest thing to install if you want it to look professional.
by RockyRob
1 person found this helpful
I ran this ribbon light tape on the inside of my basement bar. It adds a nice looking glow comin...
I ran this ribbon light tape on the inside of my basement bar. It adds a nice looking glow coming from inside the bar area and also gives you enough light to find the items we are looking for. It is reasonably priced for accent lighting. Installation is very quick and easy. The set seems to be well made and reliable. I expected more issues getting it to stick but so far I am pleased.
by Raymond
This Armacost Lighting Ribbonflex Pro Warm White Tape Light Kit with Remote is going to be instal...
This Armacost Lighting Ribbonflex Pro Warm White Tape Light Kit with Remote is going to be installed under my cupboards in the kitchen for more lighting. We haven't put it up yet but in a few weeks we are going to install it. The instructions are easy to read and understand and simple to install. My kitchen is dark and needs more lighting in there so this is where we are going to use it at.
by HomeDepotCustomer
This is a great system, just peel and stick and you're on your way. We used it for lighting under...
This is a great system, just peel and stick and you're on your way. We used it for lighting under both my daughter's beds and it went up super fast. You can cut it to length (on the copper marks, about every 4 inches). We decided to cut it and use the flexible connectors any time we made a 90 degree turn, it made the install a lot easier. I have a Ribbonflex PRO and a Ribbonflex... and I have to tell you, the only difference I can see is the PRO has a stronger power source (possibly supports longer runs)? If I was doing it all over again I would have gotten two of the non-PRO units because the power source is more like a traditional DC adapter . The PRO power source is more like a long laptop DC plug. You use a remote control to turn the system on and off after it's installed. My girls like that you can adjust the brightness with the remote. Overall a really easy system to install and use, I would use it again in a heartbeat.
by DIYinOH
One of the advantages of LED tape light is the elimination of dark areas that can occur with stri...
One of the advantages of LED tape light is the elimination of dark areas that can occur with strip light that don't run the full length of the area you want to light. In the past my avoidance of LED tape light has been due to unsightly power supply, the unknown quality of the light, cost and product reliability. I only wished the Armacost LED tape had been available before I decided to have an electrician install our under cabinet lighting. While he did a great job and we are happy with the results, with this kit I could have done the job myself and saved some money. The kit comes complete and is ready to plug in straight out of the box. Yet the power supply allows you to remove the plug wire should you want to direct wire the unit or simply run the wire through a small opening. The same is also true of the 12 volt wiring. This design flexibility simplifies installation as you can route your wires without concern to the attached power supply, plus you are able to shorten or lengthen your wire runs for a custom fit. The LED tape is just over 8 feet long and includes two connecting cables for either adding another LED tape or for cutting your existing tape and bridging around obstacles. The tape itself can be cut every 2 inches on the copper strip marking. Just make sure to match the polarity when connecting strips together or to power supply. The LED tape has 3M backing adhesive for sticking to most clean surfaces. The included RF remote allows step dimming, along with preset light levels. There are also half a dozen strobing, flickering and flashing effects for your wild parties. If hard wired to a switch I would only use the remote for dimming and not for cycling power as it could get confusing when the power switch is off and someone can't operate the LED lights with the remote. The 3000K LED output will create a warm glow, although for task lighting in the kitchen I would prefer something above 4000K. This is not RGB so you only get one color light. Still the lighting is even with good coverage. Additional LED tape and connectors are available directly from HomeDepot. The 3 year warranty gives me confidence this will preform for all long time. Since I already had LED tape in our kitchen, we opted to dress up our mantle self with some up lighting. Both the Mrs and I are delighted. This is probably the best DIY kit in design and function that I have seen and it doesn't hurt that it is reasonably priced. Note if you have highly reflective countertop you may see the individual LED lamps as they are bare and do not have any frosting in front of lens.
by 2coats
1 person found this helpful
This is a well designed LED strip light kit that will work in a number of different applications....
This is a well designed LED strip light kit that will work in a number of different applications. It is well suited to be used as under-counter lights. The power supply has the versatility to plus into an outlet, or after removing the cord, to be hard-wired directly. The kit includes cables for bending around corners with the ability to cut the tape at designated locations. The remote control works well with pre-set brightness of 25%, 50% 75% and 100% or the ability to set something in between. The only thing I wish it had was the ability to change he light temperature to something other than the 3000 K warm white.
by ChiefBob
3 people found this helpful
Showing 1-10 of 326 reviews