The Arrow Bi-Metal Oscillating Tool Blade features a 2-pack of 1-3/8 in. blades for convenient use to complete all your metal-cutting projects. The Arrow Titanium Coated Bi-Metal Oscillating Tool Blade are ideal for metal, wood with nails and more. These titanium-coated cutting blades have a universal-fit open-back connector for use on most major brands of oscillating tools. The Arrow Titanium Coated Bi-Metal Oscillating Tool Blade features solid and durable bi-metal blades with titanium-nitride coating along the tooth strip to increase blade life by reducing heat and increasing hardness. The wide 1-3/8 in. blade easily removes material quickly and effectively. in addition, the impactful packaging on the Arrow Titanium Coated Bi-Metal Oscillating Tool Blade makes it simple to match the application for your next project.
Perfect for all your metal-cutting projects
Ideal for cutting wood with nails, metal and more
Titanium coating provides long life in tough applications
Compatible fit with most major brands of oscillating tools
I've tried quite a few different brands but I've never used Arrow Oscillating Tool Blades. I was really impressed for being made in China. The blade preformed as good as my normal go to brand that much more expensive. The blade is titanium coated to aid in the performance of the blade and life. I had about 25-30 16 gauge nails in my ceiling I needed to remove and this blade cut thru them like a knife in hot butter. The blade showed absolutely no wear. I next gave the blade a try in cutting some wood again it cut fast and accurate. From time to time you might need to cut some pvc and again it took no time to cut thru schedule 40 pvc. Everything you could imagine cutting this blade did the job and showed no wear. Arrow fasteners has almost been around for 100 years and makes some of the best staples and fasteners and this isolating tool blades live up to the reputation. If your in the market these blades or one of the many other blades Arrow has to offer will help get your project done.
I do not use a jam-saw (oscillating multi-tool) very frequently but have used all of the brands available at the big box stores. I do not consider this a top tier brand like Diablo, Imperial (now Milwaukee) but it's not as expensive either. Let's face it, a small trim job can burn through $30 of these attachments easily. This Arrow brand is much cheaper and will get the same job done but maybe one minute longer.
The blade cuts as advertised and I notice more wear than the premium blades. But really? For the cost? I will probably go with these Arrows in the future because I have to keep my costs down. There's a time and place for the expensive attachments but as many as these blades get broken and "borrowed", I'm fine with the Arrow.
I didn't cut any nails just a heavy duty staple because I was sure it wouldn't have had a problem. My only complaint is the measurements painted on the blade were worn off very fast. I suppose that's a cost sacrifice. This blade plunged within 90% of the speed of a premium blade for a lot less money.
This twin pack of Arrow 1-3/8 in. Titanium Coated Bi-Metal Oscillating Tool Blades is my must have blade for working on various residential or commercial site plumbing, HVAC, remodeling, and framing repairs or upgrades. Can be trusted to cut everyday materials with absolutely no concerns. The titanium coated blade has the strength to cut fast and precisely. I own many blades but this one is the one that is consistently out performing the rest. Must have.
Nice buy. These work on any type of oscillating tool type. The titanium coating is great for going through nails and staples. Try to avoid knots in the wood as this will shorten the life of the blade. The two pack is nice and convenient to grab and go to do your projects. With a little care the blades should last for their life time. Universal fit.
These 2 blades are the right size for a variety of cuts. They mount in both pin style and quick mount lever tools flawlessly. I use this blade for cutting in outlets into drywall that is very abrasive to blades. The TI coating seems to help them last and last. I found them easy to start in most materials with little jitter or skating. I liked the measure marks on the blade for depth indications
I'm new to using an oscillating tool, but I have to say that these titanium coated bi-metal blades work pretty well. I need to cut some wood for a projected and decided to try using an oscillating tool with these blades to cut the wood. It was very convenient and the blades worked as expected. The cuts were easy to make and the blades went through the wood easily. They are "universal fit" so they should fit most oscillating tools. They fit mine.
I got these Arrow 1-3/8 inch titanium coated bi-metal oscillating tool blade 2 pack because lets face it, you can never have enough blades for these oscillating tools! I've been having a hard time finding blades for these because I'm cheap and some of the off brand ones don't fit the DeWalt oscillating tool. I like the fact that these have a small tip and being titanium coated bi-metal means i can use them for a lot of cuts and possibly to cut stuff they weren't made for. Oh well, you gotta do what ya gotta do to get the job done. In the end, these blades look to be well made and not flimsy so should take care of what I'm using them for, which is mostly wood.
Even though the packaging states it is compatible with a Dremel Oscillating tool, the blades do not fit the Battery Powered 20V Dremel Tool (Model: MM20V). The mounting point on the tool is the same size as the cutout on the blade not allowing the blade to be secured by the mounting bracket, essentially the center cut on the blade needs to be extended just a slight amount inward for it to be compatible with the Dremel tool. The guide pins line up perfectly though.
Build quality on the blade is fantastic, the blades are sturdy, and the ends feel extremely sharp to the touch. One of my favorite features on this blade is the depth gauge allowing you to see how far you are cutting into your material. Shame that it was not compatible with my Dremel tool as I was looking forward to using these blades.
Response from Arrow Product ExpertJan 12, 2022
Hello - The blade attaches to the tool by aligning the tabs on the tool with the notches on the blade. If you're having difficulty, contact us for help or refer to instructions provided by the tool manufacturer, We can be reached at firstname.lastname@example.org or 800-776-2228. -Your Arrow Fastener Team
Cut-wise I would use this product on wood primarily. With pvc piping and metal it get the job done. But with pvc piping the plastic actually heats up before cutting even begins leading to uneven cuts with bubbled and rolled plastic around the edges. With metal the cuts aren't as precise and are rather sloppy. I'm by no means a pro so if someone knows a way around this please let me know. With wood I had no issues straight out of the packaging.
These Arrow 1-3/8-inch Titanium Coated Bi-Metal Oscillating Tool Blades are as durable as any other brands that I have tried. They cut wood with ease and will cut the occasional nail, but they dull rather quickly after encountering several nails. Unfortunately, it is the nature of the task of a multi—tool that nails will be encountered when cutting in blind areas.
I recommend these Arrow blades because they are less expensive than the big-name brands, but tend to last just as long