A: Hello - This staple gun uses T50 staples up to 9/16", so it should work provided your tile's thickness is less than 9/16", allowing room for penetration through the tile and into the wood. Here's a link to our staple guide for more information: https://bit.ly/3fJdrRS. - Your Arrow Fastener Team
A: Hello - We do not recommend using a staple gun on concrete. - Your Arrow Fastner Team
A: Hello - We do not recommend staples for installing shingles. - Your Arrow Fastener Team
A: No sir.
A: Hello - The PT50 uses T50 staples in the following lengths: 1/4", 5/16", 3/8", 1/2" and 9/16". 1/8" do not work with this tool. - Your Arrow Fastener Team
A: Usually material is at least a 1/16 so you need some holding power. At least a quarter of an inch of keg even for holding a thin layer down to another thicker layer. If you used an 1/8 staple there would be no grabbing if the staple kegs to hold fast.
|Name||18-Gauge Heavy-Duty Staple/Nail Gun||PT50 Pneumatic Staple Gun||Carbon Fiber Stapler/Tacker||CS-5000 1/2 in. Heavy-Duty Compression Stapler (1-Piece)|
|Staple Type||T50||T50||T50||Type W|
|Maximum staple size (in.)||0.5625||0.5625||.5625||0.563|
|THD SO SKU||1000643923|
|Crown Width||3/8 in.||1/2 in.|
|View Product||View Product||View Product||View Product|