Model # HFDF-96

Internet #202222540

AstroGuard Deluxe Fastener (96-Pack)
0857612002157

AstroGuard

Deluxe Fastener (96-Pack)

$19999 /each

Choose Your Options

Silver
  • Silver
Package Quantity
96
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Deluxe installation anchors are designed to be used with AstroGuard fabric. This fastener anchor taps into most building materials, offering superior holding power for superior hurricane protection. Due to it's unique flush-bolt design, these anchors can be used on vertical and horizontal surfaces and create the neatest installation process of your precut AstroGuard fabric and installation clips.
  • Designed to be used with hurricane fabric/astroguard fabric and clips only
  • This deluxe fastener anchor allows for a flush mount without exposed threads and can be used on vertical and horizontal surfaces
  • Coated and stainless materials resist rust
  • Patented design assures unsurpassed holding power in most building materials
  • Easy installation with simple hand and power tools. Uses special deluxe anchor driver available separately
  • Once the anchor is installed, a screwdriver is all that is required to deploy the fabric covering the opening
  • Can be painted to match the exterior color

Product Overview

Model #: HFDF-96
Internet #: 202222540

Deluxe installation anchors are designed to be used with AstroGuard fabric. This fastener anchor taps into most building materials, offering superior holding power for superior hurricane protection. Due to it's unique flush-bolt design, these anchors can be used on vertical and horizontal surfaces and create the neatest installation process of your precut AstroGuard fabric and installation clips.

  • Designed to be used with hurricane fabric/astroguard fabric and clips only
  • This deluxe fastener anchor allows for a flush mount without exposed threads and can be used on vertical and horizontal surfaces
  • Coated and stainless materials resist rust
  • Patented design assures unsurpassed holding power in most building materials
  • Easy installation with simple hand and power tools. Uses special deluxe anchor driver available separately
  • Once the anchor is installed, a screwdriver is all that is required to deploy the fabric covering the opening
  • Can be painted to match the exterior color

Specifications

Dimensions

Product Depth (in.)
1.25
Product Height (in.)
1.0 in
Product Width (in.)
1.0 in

Details

Builders Hardware Product Type
Exterior Shutter Hardware
Finish
Silver
Finish Family
Silver
Material
Metal
Package Quantity
96
Returnable
90-Day
Type
Shutter clamping system

Warranty / Certifications

Manufacturer Warranty
10 year

Specifications

Dimensions

Product Depth (in.)
1.25
Product Height (in.)
1.0 in
Product Width (in.)
1.0 in

Details

Builders Hardware Product Type
Exterior Shutter Hardware
Finish
Silver
Finish Family
Silver
Material
Metal
Package Quantity
96
Returnable
90-Day
Type
Shutter clamping system

Warranty / Certifications

Manufacturer Warranty
10 year

Questions & Answers

How long is the anchor? I need it to be at lease 1.5 inches long to go through the stucco into t...

How long is the anchor? I need it to be at lease 1.5 inches long to go through the stucco into the plywood behind the stucco.
Asked by: Chuck
This insert is not made for wood. For wood you need the "elco female panelmate flush". It consists of a 1/4"x about 1 1/2" screw part on the bottom with a 3/4 to 1" female insert at the top. Will require predrilling twise. First a 3/16 by 2 1/2" for the screw then an 1" or so on top of that for the insert. Or it might be a drill bit that does both with one try. And yes. You can't use it on plywood. You have to install it close enough to the window to hit the stud. The middle of it.
Answered by: Steve
Date published: 2017-12-15

What size drill bit do I need to install the anchor?

Asked by: Russ
Note: hammer drill is okay for concrete slab, but not recommend for concrete block (it makes to hole diameter too large). Use regular drill with masonry bit for concrete block. Note: do not use impact driver to drive Tapcon or inserts. Using impact driver reduces pull out strength of anchor or concrete screw (Tapcon). Note: do not exceed 1200RPM when driving Tapcon or inserts. Using higher speeds reduces pull out strength of anchor or concrete screw (Tapcon). References: http://www.elcoconstruction.com/content/download/815/4221/version/9/file/CreteFlex_focused_083011.pdf http://www.buildex.ca/product/39/anchors-for-concrete-tapcon-sammy-screw
Answered by: beyeriii
Date published: 2017-10-23

Will these work with securing 3/4" plywood into concret block?

Asked by: Vic
If you are using it for temporary window protection you can but remember. You have to use them 3" away from the window edge (sill) and you are going to waste 3/4" of the thread. That will leave you only 1/4" to 1/2" thread. If it is more permanent, use tapcons.
Answered by: Steve
Date published: 2017-12-15

Can these be used on brick?

Asked by: GulfResident
I am pretty sure they can't. On a veneer home they want you to use the wood anchors. You can check by calling them.
Answered by: Jimbo
Date published: 2017-09-06
  • y_2018, m_1, d_18, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_, sid_202222540, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT

Customer Reviews

Deluxe Fastener (96-Pack) is rated 4.3 out of 5 by 6.
Rated 5 out of 5 by from These are all metal anchors that draw into the concrete... These are all metal anchors that draw into the concrete surface. They do a fine job but I wouldn’t use a power drill to set them. I tried and it nearly broke my arm when the anchor bit in. I would use a ratchet wrench with an allen bit to screw them in flush. They go in very easily
Date published: 2017-06-13
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2017-10-28
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2018-01-10
Rated 5 out of 5 by from Fasteners work great Fasteners work great
Date published: 2017-10-25
Rated 2 out of 5 by from I wish there were alternate sizes the anchors and screws themselves are good, but an odd size. We had much difficulty finding the correct size drill bit for concrete. Even the HD store did not have it.
Date published: 2013-09-30
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2017-07-19
  • y_2018, m_1, d_18, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_202222540, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 98ms
  • REVIEWS, PRODUCT