$15.77
- Compatible with 10" miter saws & table saws
- Ideal for cutting plywood, OSB, plastics & veneer
- High tooth count produces clean cuts
- View More Details
Product Details
Cutting plywood cleanly requires more teeth on the blade and Avanti delivers with this 200-teeth cutter for table saws and miter saws. Suitable for occasional DIY cuts or heavy-duty construction use, the 10 in. saw blade delivers stellar performance at an affordable price. It's constructed with high-quality steel for dependable, straight cuts on veneer, plastics, oriented-strand board (OSB) and plywood.
- Recommended for occasional DIY projects and everyday construction use
- High tooth count (200) produces clean cuts in oriented-strand board (OSB), plastics, plywood and veneer
- Not intended for use above 6000 RPM
- Economical yet high performance
- Note: product may vary by store
- Return Policy
Specifications
Questions & Answers
24Questions
Q:will this work for vinyl siding?
by|Sep 3, 2022
0 Answer
Q:Can I put a 10 inch saw blade in a 8 1/4 table saw. Thanks
by|Aug 11, 2022
2 Answers
Q:Will this blade work to cut a stack of paper? Specifically, I want to trim the binding off a paperback book so I can punch the paper later and put it in a ring binder to lay flat. If not, any suggestions? (A guilitine papercutter is very costly.)
by|Apr 7, 2022
2 Answers
Q:Will this cut pvc pipe? Imvtrying to cut it length wise so the 3” pipe is shaped like a “U”.
by|Jun 3, 2021
4 Answers
Showing 1-4 of 24
5
202
4
73
3
25
2
20
1
46
Jul 7, 2020
I used this blade with a RYOBI Mitre Saw to cut vinyl plank flooring (Home Depot's LIFEPROOF 6.5m...
I used this blade with a RYOBI Mitre Saw to cut vinyl plank flooring (Home Depot's LIFEPROOF 6.5mm). The cuts were flawless, smooth and exact. I recommend it highly for installing vinyl plank flooring.
by
May 8, 2020
Good plywood cutting blade
The wife wanted to put thin paneling strips on the wall and this did a fantastic job on cutting the boards and the trim. It gave good clean cuts and made the job go much easier. I do recommend this blade for thin materials.
by
Apr 27, 2019
I bought this to cut my bamboo flooring, and it worked perfectly very little splintering. It was ...
I bought this to cut my bamboo flooring, and it worked perfectly very little splintering. It was a great price and before buying this I had researched the internet and I could not find a 10 inch plywood blade with lots of teeth. The places that did have them were twice the price. I have had it for a few months and it cuts just like it did new. It was definitely a super great purchase.
by
Oct 20, 2018
There is nothing sweeter in the world than a sharp blade. Put this blade on my compound miter sa...
There is nothing sweeter in the world than a sharp blade. Put this blade on my compound miter saw for the MDF baseboard project in the basement. Old blade was chipping the ends of the 32 bullnose pieces I needed. New sharp blade... no chips!
by
Jul 25, 2018
Worked great to rip 3/8 lauan plywood into 6" strips for simulated shiplap wall. Ran it at modera...
Worked great to rip 3/8 lauan plywood into 6" strips for simulated shiplap wall. Ran it at moderate speed and there was little to no edge sanding to be done.
by
Jul 18, 2017
If you're doing hardwood flooring in need a high teeth count blade to cut your wood smoothly this...
If you're doing hardwood flooring in need a high teeth count blade to cut your wood smoothly this will do the job just fine for an excellent price!
by
Jan 24, 2017
This blade was used to cut a vinyl tile... Went through it like butter, without chipping the til...
This blade was used to cut a vinyl tile... Went through it like butter, without chipping the tile. After tiling two complete rooms, the blade is still as sharp as when I purchased it! Not very expensive, so that was even a bigger PLUS!
by
Jan 17, 2017
I used it to cut down my reloading table top comprised of 2 --- 3/4 inch plywood pieces glues tog...
I used it to cut down my reloading table top comprised of 2 --- 3/4 inch plywood pieces glues together for 1-1/2 in thick total cut was good and accurate and no burn marks...
by
Sep 7, 2023
Smooth finish on the floor boards I was laying. Only thing I didn’t like was multiple cuts clogged the blade. I still recommend this for you saw blade collection.
by
Aug 10, 2023
by
0/0
Explore More on homedepot.com
Bath
More Products
- Whirlpool 7.0 cu. ft. 120-Volt White Gas Vented Dryer with AUTODRY Drying System WGD4950HW
- E-Z Ancor Stud Solver 40 lbs. Drywall and Stud Anchors (50-Pack) 25325
- Hampton Bay Shaker Satin White Stock Assembled Wall Kitchen Cabinet (36 in. x 36 in. x12 in.)
- Buy VIVOHOME Outdoor Propane Cooker Triple Burner Stove with Detachable Legs X002KNHH57