#1 Home Improvement Retailer

Internet # 202830996

Model # PBD045063701F

Store SKU # 251973

4-1/2 in. x 1/16 in. x 7/8 in. Metal Cut-Off Disc with Type 27 Depressed Center

$1.87
  • Aluminum Oxide Grain for Material Removal
  • Ideal for Cutting Metal
  • Ideal for use with Angle Grinder
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

AvantiPRO Bonded Metal Cut-Off Disc is designed for cutting and slotting all types of metal. This includes sheet metal and roof decking. This cut-off disc is for use in angle grinders and is designed for metal cutting.

Highlights

  • Product size: 4-1/2 in.
  • Thickness: 1/16 in.
  • Arbor: 7/8 in.
  • Type 27-depressed center
  • Tool: angle grinders
  • Ideal for: metal material
  • Design: metal cutting
  • Quantity: 1
  • Return Policy

Product Information

Internet # 202830996

Model # PBD045063701F

Store SKU # 251973

Additional Resources

Shop All Avanti Pro

Specifications

Dimensions: H 4.5 in, W 4.5 in, L 4-1/2 in

Dimensions

Product Height (in.)4.5 inProduct Length (in.)4-1/2 in
Product Width (in.)4.5 in

Details

Abrasive MaterialAluminum OxideApplicationMedium Duty
Arbor SizeArbor: 7/8"Arbor Size (in.)7/8"
Backing MaterialOtherGrit36
Ideally Used WithAngle GrindersKitNo
Package Quantity1Power Tool Accessory TypeSanding/Grinding/Polishing Accessory
Returnable90-DaySanding GradeCoarse
Sanding, Grinding and Polishing Accessory TypeGrinding/Cut-Off WheelTools Product TypePower Tool
Wheel Diameter (in.)4-1/2"

Questions & Answers

6Questions
caret
Q:Will this cut exterior deck screws? If not, which blade
by|Jan 1, 2021
1 Answer
Answer This Question

A:  I am a welder for more than 20 years and from my experience these cut-off wheels are definitely capable of cutting a deck screw. Be sure your angle grinder RPM Rating is LOWER than the grinding wheel Rating of 15,250.

by|Jan 1, 2021
caret
Q:This product says 5/8 in arbor but under specifications it says 7/8”???
by|May 29, 2020
2 Answers
Answer This Question

A:  Hi Bbell, The Arbor of this disc is 5/8". We are working to fix specs. Thank you for pointing this out!

by|Jun 3, 2020

    A:  It will fit angle grinder with 5/8” arbor. Make sure your RPM RATING for your grinder is LOWER than the grinding wheel 15,250 RPM rating

    by|Jan 1, 2021
    caret
    Q:Will this cut cast iron?
    by|Nov 11, 2017
    1 Answer
    Answer This Question

    A:  Yes, this grinding wheel can be used to grind cast iron.

    by|May 5, 2023
      caret
      Q:will this work with a grinder that has a 5/8in arbor??
      by|Nov 3, 2017
      1 Answer
      Answer This Question

      A:  Hello. I’m Chris from the Home Depot’s how-to Community. Thank you for your question. Yes, this cut-off disc has a 5/8” arbor hole. I hope this helps, Chris. .

      by|May 5, 2023
      1 found this answer helpful
      Showing 1-4 of 6

      Customer Reviews

      4.2 out of 5
      • 4.2 out of 61 reviews
      • 75% recommend this product
      Filter by:
      Showing 1-10 of 61 reviews
      I didn't have good luck with these. The cutting wheel that came with my grinder ran smooth and la...
      I didn't have good luck with these. The cutting wheel that came with my grinder ran smooth and lasted for quite a while cutting 1" x 1/8" angle iron. I needed some more wheels so I bought one of these Type 27 Avanti Pro and a Type 1 Avanti Pro (flat CD style) cutting wheels . After destroying the Avanti Pro Type 1 first, I removed it and installed this Type 27 cutting wheel. Lots of tool vibration free running and jumping around while trying to start the cut. The wheel edge was all messed up after one cut. Since it wasn't damaged as bad as the Type 1 and I still had more material to cut, I kept using it. The Type 27 finally got a little smoother after it wore down about 1/4" but still the cutting performance was terrible. I'll pass on this brand in the future.
      by
        3 found this review helpful
        Great Value!
        I used these on a Milwaukee Fuel 5" grinder to cut down a smashed picnic table (tree cutting). The steel pipes were 1/4" thick, and about 3-4" in diameter (maybe Schedule 40). My Home Depot had these 5" Avanti Pro, and also some 4-1/2" Diablo (the 5" Diablo was out of stock). Based on the 1 star review, I did not expect much; however, the Avanti performed GREAT, and the Diablo wore out very quickly (which was a little surprising). The attached pictures shows an NEW 5" Avanti disk, the two USED Avanti disks were used for the majority of the cutting operations, and the single Diablo disk did the least amount of cutting (I cut two times on one pipe), and it wore out very quickly. The Diablo was a 0.040" disk, and the Avanti are 1/16" (0.063").
        by
        • DIY
        • Recommended
        2 found this review helpful
        Blew apart
        This cut off wheel is crap and dangerous. It started coming apart the moment it made contact
        by
        Response from AvantiPRO Product ExpertFeb 23, 2023
        Thank you for taking time to share this. We sincerely want you to have the best experience possible, so please do not hesitate to reach out if there's anything we can do to help: info@avantiprotools.com. AvantiPro
          Poor excuse for cutting wheel both wheels broke trying to...
          Poor excuse for cutting wheel both wheels broke trying to cut 1/16” steel
          by
          Response from AvantiPRO Product ExpertOct 20, 2022
          Thank you for taking time to share this. We sincerely want you to have the best experience possible, so please do not hesitate to reach out if there's anything we can do to help: info@avantiprotools.com. AvantiPro
          • Verified Purchase
          cut my 55 gallon metal drum head off with no...
          cut my 55 gallon metal drum head off with no problem
          by
          • Verified Purchase
          by
            Ez to do business with....
            Ez to do business with.
            by
            • Verified Purchase
            This one wore down a lot faster than the Diablo...
            This one wore down a lot faster than the Diablo did. It cut but it needed more TLC. I will purchase the Diablo over this one for the additional $1; plus it took a long time, over two weeks, to get here.
            by
            Response from AvantiPRO Product ExpertApr 12, 2021
            Hi Tony! Thank you for taking time to share this. We sincerely want you to have the best experience possible, so please do not hesitate to reach out if there's anything we can do to help: info@avantiprotools.com. AvantiPro
            • Verified Purchase
            Rating provided by a verified purchaser...
            Rating provided by a verified purchaser
            by
            • Verified Purchase
            Rating provided by a verified purchaser...
            Rating provided by a verified purchaser
            by
            • Verified Purchase
            Showing 1-10 of 61 reviews