#1 Home Improvement Retailer

Internet #309222817

Model #90001

1 gal. #PFC-33 Washed Khaki Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint

  • Now even better with an improved adhesion formula
  • Resists peeling caused by hot tires
  • Available in custom colors and computerized color matching
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Concrete driveway coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Protect and Enhance

A premium floor coating providing beauty and protection against hot tire pick-up and stains

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Durable, Protective Floor Coating

Epoxy floor coating for garage floors, driveways, porches, patios, and interior concrete floors

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Refresh Concrete Surfaces

Use this coating to transform weathered concrete surfaces into a showroom finish

Concrete surface being stripped with a concrete paint stripper

STEP 1

Use a paint stripper to remove loose or peeling paint

Concrete floor being etched with a concrete etcher

STEP 2

Clean and etch surfaces until it feels like 150 grit sandpaper

Concrete floor being rinsed with hose and water

STEP 3

Rinse surface thoroughly and allow to dry

Concrete floor being primed with BEHR PREMIUM Concrete Bonding Primer

STEP 4

Optional for high traffic areas; prime with No. 880 Concrete and Masonry Bonding Primer

Concrete driveway coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Prevents hot-tire pickup

Ideal for driveways

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Interior Drivable Surfaces

Ideal for garage floors

Concrete patio surface coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Exterior Surfaces

Ideal for concrete porches and patios

Concrete walkway coated with BEHR PREMIIUM Concrete and Garage 1-Part Epoxy Coating

Exterior Steps and Entryways

Ideal for walkways

Interior concrete floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Interior Surfaces

Ideal for Interior Concrete Floors

Product image of BEHR PREMIUM Anti-Slip Additive

Optional Finish

Consider adding Non-Slip Additive for added textured

The advanced Self-Priming 1-Part Epoxy Concrete and Garage Floor Paint is ideal for interior and exterior concrete floors. It resists peeling caused by hot tires. It provides a stain, chemical and weather resistant finish.
  • Ideal for garage floors, driveways, patios and walkways
  • Surfaces stay cleaner longer
  • Satin finish gives floors a nice shine
  • Easy, no-mix formula
  • UV protection
  • Available in pre-mix slate gray
  • Cleans with soap and water
  • Online Price includes a Paint Care fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI, VT, WA
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Garage Floor Paint

current product
1 gal. #PFC-33 Washed Khaki Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint
1 gal. Slate Gray Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint1 Gal. #ECC-10-2 Jet Black Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint1 gal. #901 Silver Gray Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint
BrandBEHR PREMIUMBEHR PREMIUMBEHR PREMIUMBEHR PREMIUM
Name1 gal. #PFC-33 Washed Khaki Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint1 gal. Slate Gray Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint1 Gal. #ECC-10-2 Jet Black Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint1 gal. #901 Silver Gray Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint
Price
Ratings
(226)
(663)
(236)
(125)
Container Size1 Gallon1 Gallon1 Gallon1 Gallon
Paint/Stain FeaturesChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,UV/Fade Resistant,WashableChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,Tintable,UV/Fade Resistant,WashableChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,UV/Fade Resistant,WashableChemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,Tintable,UV/Fade Resistant,Washable
Substrate/Surface Usage TypeBrick,Concrete,StoneBrick,Concrete,StoneBrick,Concrete,StoneBrick,Concrete,Stone
Coverage Area (sq. ft.)500500500500
SheenSatinSatinSatinSatin
Base MaterialEpoxyEpoxyEpoxyEpoxy
Epoxy Type1 Part Epoxy1 Part Epoxy1 Part Epoxy1 Part Epoxy
TransparencySolidSolidSolidSolid
KitNoNoNoNo
View ProductView ProductView ProductView Product
Concrete driveway coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Protect and Enhance

A premium floor coating providing beauty and protection against hot tire pick-up and stains

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Durable, Protective Floor Coating

Epoxy floor coating for garage floors, driveways, porches, patios, and interior concrete floors

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Refresh Concrete Surfaces

Use this coating to transform weathered concrete surfaces into a showroom finish

Concrete surface being stripped with a concrete paint stripper

STEP 1

Use a paint stripper to remove loose or peeling paint

Concrete floor being etched with a concrete etcher

STEP 2

Clean and etch surfaces until it feels like 150 grit sandpaper

Concrete floor being rinsed with hose and water

STEP 3

Rinse surface thoroughly and allow to dry

Concrete floor being primed with BEHR PREMIUM Concrete Bonding Primer

STEP 4

Optional for high traffic areas; prime with No. 880 Concrete and Masonry Bonding Primer

Concrete driveway coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Prevents hot-tire pickup

Ideal for driveways

Concrete garage floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Interior Drivable Surfaces

Ideal for garage floors

Concrete patio surface coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Exterior Surfaces

Ideal for concrete porches and patios

Concrete walkway coated with BEHR PREMIIUM Concrete and Garage 1-Part Epoxy Coating

Exterior Steps and Entryways

Ideal for walkways

Interior concrete floor coated with BEHR PREMIUM Concrete and Garage 1-Part Epoxy Coating

Interior Surfaces

Ideal for Interior Concrete Floors

Product image of BEHR PREMIUM Anti-Slip Additive

Optional Finish

Consider adding Non-Slip Additive for added textured

Specifications

Dimensions

Container Size
1 Gallon
Coverage Area (sq. ft.)
500

Details

Application Method
Brush,Paint Sprayer,Roller
Base Material
Epoxy
Color Family
Brown
Color/Finish
Washed Khaki
Dry To Touch Time (hh:mm)
01:00
Epoxy Type
1 Part Epoxy
Interior/Exterior
Exterior,Interior
Kit
No
Maximum Optimal Temperature (F)
90
Minimum Optimal Temperature (F)
50
Number per Package
1
Paint/Stain Clean Up
Soap & Water
Paint/Stain Features
Chemical Resistant,Driveable Surface,Durable,High Foot Traffic,Mildew Resistant,Paint & Primer in One,Prevents hot tire pickup,Stain Resistant,UV/Fade Resistant,Washable
Paint/Stain/Waterproofer Product Type
Concrete Basement & Garage
Recommended Number of Coats
2
Returnable
90-Day
Sheen
Satin
Stain & Sealer In One
No
Substrate/Surface Usage Type
Brick,Concrete,Stone
Surface Location
Basement Floor,Driveway,Garage Floor,Patio,Pool Deck
Time before recoating (hours)
4
Transparency
Solid
Vertical/Horizontal
Horizontal

Warranty / Certifications

Manufacturer Warranty
Limited Warranty

Questions & Answers

18Questions10Answers

Can You add a non slip additive like Shark grip to this product?

Asked by Larry February 19, 2021
1
Answer

Hi Larry. Thanks for writing in with your question. Yes, a non-slip or non-skid additive can be added to our 1-Part Epoxy to help with slip-resistance. Good luck with your project! -Joni

What sealer can be used over this 1-part epoxy and paint chips?

Asked by Gary January 2, 2021
1
Answer

Hi Gary - Thank you for your question. Our 1-Part Epoxy can be topcated with any water-based clear coat that is suitable for floors like our Wet-Look (https://www.homedepot.com/p/BEHR-PREMIUM-1-gal-Wet-Look-Sealer-98501/202263927) or Low-Lustre Sealers (https://www.homedepot.com/p/BEHR-PREMIUM-1-gal-Low-Lustre-Sealer-98601/202263929?keyword=low-lustre+sealer&semanticToken=304100401122000000_202101041802051514674557200_us-central1-q89k+304100401122000000+%3E++cnn%3A%7B0%3A0%7D+cnp%3A%7B10%3A0%7D+cnd%3A%7B4%3A0%7D+cne%3A%7B8%3A0%7D+cns%3A%7B5%3A0%7D+cnx%3A%7B3%3A0%7D+cnq%3A%7B0%3A0%7D+cnw%3A%7B0%3A0%7D+cnv%3A%7B0%3A0%7D+st%3A%7Blow-lustre+sealer%7D%3Ast+oos%3A%7B0%3A1%7D+pt%3A%7Bsealant%7D%3Apt+dln%3A%7B584831%7D+smf%3A%7Bca%2Cbr%2Cfe%2Ccu%2Cpo%7D%3Asmf+nf%3A%7B1%7D%3Anf+qu%3A%7Blow-lustre+sealer%7D%3Aqu). Best - Sara

Does Behr Premium Concrete & Garage need a topcoat after paint is applied?

Asked by Sunny June 14, 2020
1
Answer

Hi Sunny - Thank you for your question! This product will dry to an extra durable coating that does not require a separate topcoat. However, if you'd like a glossier finish, it can be topcoated with our Wet-Look Sealer (https://www.homedepot.com/p/BEHR-Premium-1-gal-Wet-Look-Sealer-98501/202263927). Best - Sara

If I use the color chip do I put them in the paint?

Asked by Cindy April 6, 2020
1
Answer

Hello Cindy, Thanks for reaching out. We don’t recommend mixing color chips within the paint. Typically the color chips are spread across the surface while the paint is still wet. I recommend following the directions on the back label of your chips selection for further instructions. Best, Roxana N.

How many square feet does one gallon cover ?

Asked by Godfatherfan1 February 27, 2020
1
Answer

Hi Godfatherfan1, thanks for writing in with your question. Each gallon of the 1-Part Epoxy will cover between 300-500 sq. ft. based on the texture of the surface. If applying to bare concrete, be sure to clean and etch the floor until it feels like 150-grit sandpaper. Good luck with your project! -Giovanna

what's the best way to apply and how much area does a 5gal bucket cover?

Asked by rudyrue123 January 2, 2020
1
Answer

Hello rudyrue123, Thanks for writing in. The Behr Premium Interior/Exterior Concrete & Garage Self-Priming 1-Part Epoxy should be applied at an evenly thinly coat using a 3/8” nap roller cover, nylon/polyester brush or an airless sprayer (.015”-.021” spray tip, 60 mesh filter). The price can vary slightly by region and taxes. I suggest reaching out to your local Home Depot for further information. I hope this information helps and good luck with your project. Best, Roxana N.

Can you add color chips to floor as you can with epozy garage floot product

Asked by Dave December 3, 2019
1
Answer

Hi Dave, thanks for writing in with your question. Yes, you can use flakes with our 1-Part Epoxy Paint. Typically, you'll want to work in 3' x 3' sections to ensure flakes are evenly distributed and apply directly onto a wet painted surface. Good luck with your project! -Giovanna

how do we mix the color?

Asked by rolo November 29, 2019
1
Answer

Hi rolo, This specific product listing is for 1-Part Epoxy already tinted to Washed Khaki (PFC-33). If you'd like to purchase the untinted base, Home Depot can take care of the tinting. We don't recommend doing it yourself. Good luck with your project! ~Doris

Is this a vapor impermeable coating? I am looking for an interior concrete floor coating that is ...

Asked by PB October 9, 2019
1
Answer

Hello PB, Thanks for reaching out. No, the Behr Premium Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint isn't an impermeable coating. Behr does not make any products that are considered vapor barriers. I suggest reaching out to your local Home Depot for a suitable product recommendation. I hope this information helps and good luck with your project. Best, Roxana N.

Is it low VOC?

Asked by Kec September 29, 2019
1
Answer

Hi Kec, thanks for writing in with your question. The 1-Part Epoxy Paint is a water-based product and considered low VOC. We recommend having good ventilation when applying the product, and while it dries. It does not have a strong smell, but may be different to each person. Please see the safety data sheet (SDS) online for additional details. Have a great day! -Giovanna

1 gal. #PFC-33 Washed Khaki Self-Priming 1-Part Epoxy Satin Interior/Exterior Concrete and Garage Floor Paint - page 2

Customer Reviews

  • 3.5
    out of 226 reviews
  • 60% recommend this product
Filter by:
Showing 1-10 of 226 reviews
After months, tire marks are still showing. Cannot be cleaned even with power washer. Previous pa...
After months, tire marks are still showing. Cannot be cleaned even with power washer. Previous paint (brand unknown) had no tire marks.
by Markazon
Response from BehrJul 8, 2020
Hi Markazon,

Thank you for sharing your experience with 1-Part Epoxy. I'm very sorry to hear about the tire mark issue, as it certainly isn't what we want our customers to go through. Tough stains and tire marks can be removed with a concrete cleaner. Please contact us directly for further assistance with this matter, we'd love to find a way to help!

Kindest regards,

Doris Behr
Very Disappointing
Followed the directions to the letter and then let it sit twice as long as recommended. Tire peel happened almost immediately. Looks awful. What a waste if time and money.
by FMnc
Response from Joanne, Behr Customer CareMay 3, 2021
Hi FMnc, thank you for your review. I'm so sorry the paint is peeling even after letting it dry longer. I recommend removing any loose coating, spot etching the bare concrete to feel like 150 grit sandpaper, spot priming the bare concrete spots with our Concrete & Masonry Bonding Primer No. 880 to further help with adhesion in those areas, then touching up and recoating with the paint. Customer satisfaction is important to us, and we appreciate your feedback. I'll reach out to you directly to assist you with this further. Thank you again for taking the time to share your experience with us, and I hope to hear from you soon! -Joni
Don't waste your money
[This review was collected as part of a promotion.] I applied this on my side walk around the house. 10 months and it's already peeling out. I followed all instructions and still it peeled. Use some other product but not this.
by Kishore
Response from Joanna, Behr Customer CareApr 18, 2021
Hi Kishore, thanks for sharing your feedback. We're sorry to hear the epoxy paint you used on your sidewalk peeled so soon; that's not the performance we expect from our products.

To get your project back on track, we'd recommend removing all the loose paint from your surface, cleaning your surface with a concrete cleaner and degreaser, allowing it to for at least 24 hours, and spot priming any bare/uncoated concrete spots with our Bonding Primer No. 880 before touching them up with your paint.

Customer satisfaction is very important to us. So, we've reached out to you directly to assist you further. We hope you have a great rest of your weekend.
Long time Behr customer left dissatisfied.
In September of 2020, we purchased this product to cover our bare garage concrete. We prepped the concrete as directed using a power washer & highly toxic chemicals (muriatic acid & concrete cleaner). Waited for the concrete to fully dry. After applying our two coats as directed, we waited more than 5 days to park our vehicles in our newly finished garage. After driving in the 1st snowfall of the winter of 2020, our newly coated concrete immediately began peeling off in chunks under each of the tires (2 cars). This product does not perform as intended, and we would not consider recommending this product, nor are we sure that we are willing to waste another 2 weeks re-prepping, re-applying the product, and waiting for the product to dry again. This was a moderate to high-priced home project between the Behr product, and all of the additional supplies needed to complete the job.
by almagitanaCO
Response from Joanne, Behr Customer CareApr 15, 2021
Hi almagitanaCO, thank you for your review. I'm so sorry our 1-Part Epoxy peeled in chunks. I recommend removing any loose coating, spot etching the bare concrete to feel like 150 grit sandpaper, spot priming the bare concrete spots with our Concrete & Masonry Bonding Primer No. 880 to further help with adhesion in those areas, then touching up and recoating with the paint. Also, we recommend waiting 7 days to drive on the coating or after 72 hours using cardboard under the tires. Customer satisfaction is important to us, and we appreciate your feedback. I'll reach out to you directly to assist you with this further. Thank you again for taking the time to share your experience with us, and I hope to hear from you soon! -Joni
Great coverage and durability
[This review was collected as part of a promotion.] Very pleased with this product. Looks great on our pole barn concrete floor. Easy to clean. Put two coats on floor and is wearing very well, very durable.
by Pris
Not good
We followed the directions to apply the paint. It is about 8 months later and there are stains anywhere a stick or piece of wood got on the concrete. This is on a screened in back porch. I am glad I did not do the area next to the porch. I would not recommend this paint to anyone. We wasted our time.
by Catray
Response from Sara, Behr Customer CareApr 5, 2021
Hi Catray - Thank you for your review. I'm sorry to hear about the stains on your back porch! To remove them, I recommend using a mild dish soap and water. For more stubborn stains, a concrete cleaner/degreaser can be used to maintain a clean finish. I've also reached out to you via email to learn more about your project and help you get it back on track. Thanks again for submitting a review, and I hope to hear back from you soon. - Sara
not worth buying
[This review was collected as part of a promotion.] Followed the instructions to the letter.Paint peeled right away not worth your time to apply
by pablo2
Response from Joanna, Behr Customer CareApr 4, 2021
Hi pablo2, thanks for sharing your feedback. We're sorry to hear our epoxy paint peeled off your surface; that's not the performance we expect from our products.

To get your project back on track, we'd recommend removing the loose coating from your surface, spot etching any bare/uncoated areas, cleaning your surface with a concrete cleaner and degreaser, allowing it to dry for at least 24 hours, spot priming and touching up the affected areas. A complete recoat may be needed to uniform your application.

Customer satisfaction is very important to us. So, we've reached out to you directly to assist you further. Have a great rest of your weekend.
Great product
[This review was collected as part of a promotion.] Highly recommend. Easy to use. Looks great. Affordable too.
by Raqi
Worked great for my use
[This review was collected as part of a promotion.] I have used this product on two occasions. Both times I used it on concrete Cinder Blocks and caps. It covered great, given how coarse/porous the blocks are. Blocks are fully exposed to the elements, including full sun. I have not noticed any fading after one year. Seems to be a quality product.
by Good Product
Great coverage
[This review was collected as part of a promotion.] I bought this product to recapture a patio and also paint an addition I did to the patio with red concrete pavers. I was surprised at how well the product covered the red. I painted it with slate gray concrete and garage 1 part epoxy. I am extremely happy with the results and would definitely recommend and will use the product for other projects in the future
by RJ6551
Showing 1-10 of 226 reviews