Top Rated
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
BEHR Premium Water-Based Stain & Poly delivers rich color and protection in one easy step. This formula can be tinted to a wide range of popular interior colors and provides a warm look and durable protection to any interior wood surface. This high performance stain & poly in one dries quick to a uniform finish, allowing you to shorten your project time and achieve beautiful results.

Container Size | 8 Ounce |
|---|---|
Coverage Area (sq. ft.) | 125 sq ft |
Application | Wood Waterproof/Sealer |
|---|---|
Application Method | Brush, Pad |
Base Material | Water Based |
Color Family | White |
Color/Finish | Antique White |
Dry to Touch (min.) | 60 min |
Interior/Exterior | Interior |
Number of coats recommended | 2 |
Number per Package | 1 |
Paint/Stain Clean Up | Soap & Water |
Paint/Stain Features | Abrasion Resistant, Chemical Resistant, Durable, Fast Drying, Low Odor, Moisture Resistant, Sealer, Stain & Poly in One, Washable |
Product Form | Liquid |
Returnable | 90-Day |
Substrate Condition | Bare Wood, Finished Wood, Old/Reclaimed Wood, Plywood, Stained Wood, Unfinished Wood |
Surface Material Use | Wood |
Time before recoating (hours) | 1 |
Transparency | Semi-Transparent |
Vertical/Horizontal | Vertical / Horizontal |
Wood Effects | No Additional Effect |
Manufacturer Warranty | Lifetime Limited Warranty |
|---|
Hi Bas2, thanks for the question. Yes, it is recommended to sand in-between coats with 400-grit sandpaper. If you have additional questions about your project, please reach out to us directly. Our customer care team is happy to help. -Ronald
Hi Asia, thanks for reaching out. We don't recommend using our Stain & Poly in One on a floor project. Instead, you can use our Water-Based Interior Wood Stain and topcoat it with our Water-Based Floor Finish Polyurethane. Have a great day! -Christina
just sprayed today for a large trim job. Light first coat, 320 grit light sanding and then a slightly heavier second coat and it ended up looking like it came out of a cabinet shop. This, of course needs, to be done with an HVLP sprayer.
Hi Mark, thank you for your question. We do not recommend spraying our Stain and Poly. It is best to apply using a brush, holding at a 45-degree angle and maintaining a wet edge. Good luck with your project! -Giovanna
Hi Linda, thanks for the question. Please reach to us directly to learn more about your project to assist you best. We are always happy to help. -Alex
Hi Summer, thanks for your question. Please reach out to us directly to learn more about your project to assist you best. We are always happy to help. -Alex
Hi RASOH, thank you for your questions. To remove a previous interior wood finish, we recommend 120-grit sandpaper. Before staining and between coats, we recommend sanding with 400 grit sandpaper to ensure adhesion. Have a great day! -Adelina
Hi RookieDon, thanks for reaching our with your question. Before applying our coating, we recommend stirring the product thoroughly and occasionally during use. Also, as a tip, I suggest first testing the color out by applying it to a small test area to ensure the color is to your liking. Good luck with your project! -Angie
Hi LeeAnn, thank you for your question. To ensure proper adhesion and acceptance of the Water-Based Stain & Poly, it's best to scuff sand the spot before touching up the finish and blend that in with the surrounding area. Have a great day! -Adelina
Viewing 1-8 of 194
4 out of 5