Internet #100129649

Model # 88001

Store SKU #250914

0082474880012

BEHR Premium

1 Gal. Concrete and Masonry Bonding Primer

  • Promotes a uniform topcoat finish
  • Helps prevent peeling of topcoats
  • Dries clear
$ 21 98
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Promotes a uniform topcoat finish
  • Helps prevent peeling of topcoats
  • Dries clear
The BEHR PREMIUM 1-Gallon Concrete and Masonry Bonding Primer is a high-performance, ready-to-use pre-treatment for porous concrete. This high-performance water-based primer will promote a uniform topcoat finish. Also creates a stronger adhesion between the coating and surface.
  • Ideal for interior/exterior horizontal concrete, masonry, stucco, cinder block, brick and any other porous stone
  • Ready-to-use pre-treatment for porous concrete
  • For the best results, be sure to properly prepare the surface using other applicable preparation products as described in the label instructions
  • Apply using a high quality pump sprayer, 1/4 in. - 3/8 in. nap roller, nylon/polyester brush or a pad applicator
  • Water-based formula promotes the adhesion of paints and stains to concrete
  • 350 - 500 sq. ft. of coverage per-gal
  • Cleans with paint thinner
  • Actual paint colors may vary from on-screen and printer representations
  • Online price includes a PaintCare fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI and VT
  • California residents see Prop 65 WARNINGS

Product Overview

  • Promotes a uniform topcoat finish
  • Helps prevent peeling of topcoats
  • Dries clear
Model #: 88001
Sku #: 250914
Internet #: 100129649

The BEHR PREMIUM 1-Gallon Concrete and Masonry Bonding Primer is a high-performance, ready-to-use pre-treatment for porous concrete. This high-performance water-based primer will promote a uniform topcoat finish. Also creates a stronger adhesion between the coating and surface.

  • Ideal for interior/exterior horizontal concrete, masonry, stucco, cinder block, brick and any other porous stone
  • Ready-to-use pre-treatment for porous concrete
  • For the best results, be sure to properly prepare the surface using other applicable preparation products as described in the label instructions
  • Apply using a high quality pump sprayer, 1/4 in. - 3/8 in. nap roller, nylon/polyester brush or a pad applicator
  • Water-based formula promotes the adhesion of paints and stains to concrete
  • 350 - 500 sq. ft. of coverage per-gal
  • Cleans with paint thinner
  • Actual paint colors may vary from on-screen and printer representations
  • Online price includes a PaintCare fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI and VT
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand Seal-Krete BEHR Premium Seal-Krete Dyco Paints
Name 1 gal. Original Waterproofing Sealer 1 Gal. Concrete and Masonry Bonding Primer 5 gal. Original Waterproofing Sealer Paver Sealer 5 gal. 7200 Clear Gloss Exterior Solvent Acrylic Sealer
Price
$15.97
$21.98
$66.00
$140.40
Ratings (178) (244) (178) (69)
View Product View Product View Product View Product

Specifications

Dimensions

Container Size
1 GA-Gallon

Details

Application Method
Brush,Paint Sprayer,Roller
Coating Product Category
Waterproofer/Sealer
Color/Finish
Clear
Concrete/Masonry Surface Application
Basement Floor,Basement Wall,Exterior Wall,Garage Floor,Garage Wall
Dry To Touch Time (hh:mm)
02:00
Interior/Exterior
Exterior,Interior
Kit
No
Maximum Optimal Temperature (F)
90
Maximum hydrostatic pressure (lb.)
12
Minimum Optimal Temperature (F)
50
Paint/Stain Base Material
Acrylic
Paint/Stain Key Features
Primer Required
Paint/Stain/Waterproofer Product Type
Concrete Waterproofer/Sealer
RGB Value
235:235:232
Recommended Number of Coats
2
Returnable
Non-Returnable
Substrate/Surface Use Type
Concrete/Brick/Masonry/Stone
Transparency
Clear
Vertical/Horizontal
Vertical / Horizontal

Specifications

Dimensions

Container Size
1 GA-Gallon

Details

Application Method
Brush,Paint Sprayer,Roller
Coating Product Category
Waterproofer/Sealer
Color/Finish
Clear
Concrete/Masonry Surface Application
Basement Floor,Basement Wall,Exterior Wall,Garage Floor,Garage Wall
Dry To Touch Time (hh:mm)
02:00
Interior/Exterior
Exterior,Interior
Kit
No
Maximum Optimal Temperature (F)
90
Maximum hydrostatic pressure (lb.)
12
Minimum Optimal Temperature (F)
50
Paint/Stain Base Material
Acrylic
Paint/Stain Key Features
Primer Required
Paint/Stain/Waterproofer Product Type
Concrete Waterproofer/Sealer
RGB Value
235:235:232
Recommended Number of Coats
2
Returnable
Non-Returnable
Substrate/Surface Use Type
Concrete/Brick/Masonry/Stone
Transparency
Clear
Vertical/Horizontal
Vertical / Horizontal

Questions & Answers

I am getting ready to use Granite Grip over existing old outside chattahoochee 10X35 covered pati...

I am getting ready to use Granite Grip over existing old outside chattahoochee 10X35 covered patio. I plan to pressure wash, etch with muriatic acid and the apply a recommended concrete bonding primer. Is this what I should be using before three coats of Granite Grip? Please advise.
Asked by: Giant6101
It work for me I thing it will work for you , I used the product for my garage
Answered by: George
Date published: 2018-02-07

Should I use more than coat? It says cover 300 sq feet. I have 250 sq feet and barely had to use half gallon.

Asked by: KEv
Yes. It works better with a thicker coat.
Answered by: Ubcr
Date published: 2018-12-31

I have a 500sf,, newly poured, 2-stall garage slab, with an extremely smooth and smooth finished ...

I have a 500sf,, newly poured, 2-stall garage slab, with an extremely smooth and smooth finished surface. I tend to wait 30-days primer to applying any coating. Will I need to etch the surface with a prep BEFORE applying the Primer?? I intended to use Behr 1-part Epoxy floor paint for my finish. Thank you for any advice! Westifer
Asked by: Westifer
My garage has just been resurfaced - I called Behr customer service - Google Behr Customer Service - among other things you need to use diluted muriatic acid - biodegradable - and then primer and than paint - couple drops of water on floor and if all soaks in withing 1-5 minutes than you can start - usually sinks in between 20 to 30 days -I also will be using the Behr part !
Answered by: BOB
Date published: 2019-04-09

I heard bonding primer is not supposed to go over existing paint. My basement has some old paint ...

I heard bonding primer is not supposed to go over existing paint. My basement has some old paint still I can't scrap off, can this be used on it or is there an option that can go on concrete and old paint? not sure if I should just go try regular latex primer because of existing paint.
Asked by: Jay
Jay, I have used this product only on a couple of applications on my 1890's vinatage house (but newer basement floor). I have used the product where some paint could not be removed but where I was mostly down to concrete. So I had to paint this primer over latex paint in places. After 18 months (exterior) and a few months (interior floor), so far no problems of any kind. But I would say that the product is probably at its best on concrete. Rick
Answered by: Rick
Date published: 2018-12-10
  • y_2019, m_6, d_18, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_183
  • loc_, sid_100129649, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 29ms
  • QUESTIONS, PRODUCT

Customer Reviews

1 Gal. Concrete and Masonry Bonding Primer is rated 4.3 out of 5 by 244.
Rated 3 out of 5 by from I bought this a few years back and did my... I bought this a few years back and did my garage and patio. The porch in a different color. I did as directed on can. Cleaned and scrubbed, used the bonding primer recommended, on the garage. It did not take long and the paint came up where the tires sit. And left dark streaks where the tires drive up. I ran out of the bonding primer on parts of the porch and patio, so used some Kiltz I had. It seems to work as well as the bonding primer. We poured more concrete, so have to match to the porch. If I had to do over, I would not have painted the garage floor.
Date published: 2019-06-04
Rated 5 out of 5 by from THIS IS THE STUFF!!!! 10 yrs ago I power washed, acid etched and sanded my concrete shop floor...applied a great quality 2 part epoxy concrete paint....worked great for about 8 years. Efflorescence (sp?) started working its way up and finally I had spots (2" to 18") starting to lift and peal...nothing I did would stop the efflorescence and lifting until this Behr primer. Cleaned the bare spots, sanded (50 grit) and then DOUBLE primed with the Behr primer. Finally recoated with 2 part epoxy paint and have not had a single bit of efflorescence or lifting. I love this stuff AND I've been using on exterior wood trim as a primer because it "seaks" out moisture and seals it. It has worked great as a primer on exterior painted cedar. Wish I would have found this primer years ago!
Date published: 2014-11-10
Rated 4 out of 5 by from Easy to apply. One problem noted is that after applying a Behr concrete stain and waiting three d... Easy to apply. One problem noted is that after applying a Behr concrete stain and waiting three days, the stain was dry but readily came up when anything was placed on it and the same result after 7 days. I will wait three weeks before putting anything heavy on it. Maybe the concrete stain would penetrate better without the bonding primer. ?????
Date published: 2019-05-04
Rated 1 out of 5 by from I am trying this again with my Behr concrete paint.... I am trying this again with my Behr concrete paint. The paint has chipped away over the winter and has to be redone. Not happy with this product and actually Behr as a whole. Best thing Behr has going for it is their advertising because your products are not good. You asked...
Date published: 2019-05-07
Rated 1 out of 5 by from Colors aren’t good when painting an outside porch. I... Colors aren’t good when painting an outside porch. I don’t know what is wrong with the grey shades but either they come off as indigo, lavender or mauve. It’s very odd, I’ve never had this problem with a paint color. Behr needs to color test their concede paint colors more.
Date published: 2019-04-02
Rated 5 out of 5 by from This product is easy to use and bonded well with... This product is easy to use and bonded well with the etched concrete floor on which I used it. The directions state that the primer can be painted over after just 4 hours. I waited for 6 hours and had no issues so far.
Date published: 2019-05-07
Rated 5 out of 5 by from Recomended by the salesman at HD for use on bare... Recomended by the salesman at HD for use on bare concrete floors to get good accession and no flaking on the finish coat. I used this primer and I think the finished results came out great!
Date published: 2019-04-14
Rated 5 out of 5 by from Paint went on very well on old previously paint patio... Paint went on very well on old previously paint patio (primed surface before pairing). Bond to existing surface is something I will be watching.
Date published: 2019-04-16
  • y_2019, m_6, d_18, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_244
  • loc_, sid_100129649, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT