Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is, The hole saw will not work in a wet saw. It must be used with a hole saw arbor and drill. Best to use a ½’ drill and 7/16” arbor.
You will need a 3/8" arbor w/ pilot bit. The Blu-Mol # 5514, E0102457 is a hex shank mandrel which includes a 3-1/4" x 1/4" pilot bit. Packed 1/box. This mandrel can be used with holes saws ranging from 9/16" to 1-3/16".
Dear Valued Home Depot Customer, We have reached out to the manufacturer and their reply is, Yes
Although the Carbide teeth are hard enough to cut through glass the 6" Blu-Mol Xtreme Carbide Tipped Hole Saw was not designed for that purpose. The tooth shape, angle of attack and spacing, would be too aggressive and the resulting chatter would likely crack the glass.
No, this is not recommended to be use on stucco.
Dear Valued Home Depot Customer, We have reached out to the manufacturer and their reply is, You will be better off using a RemGrit Carbide-Grit Hole Saw. The individual teeth on a carbide tooth hole saw would chip and break off. We were unable to find a 3-1/2” diameter on the HD website. However, there are 3-3/8” and 3-3/4” diameter saws.
This product is made out of solid piece.
Yes, this will work for your aluminum patio table
Product Number: 5514, Fits Bi-Metal hole saws 9/16″ – 1-3/16″ in diameter
Please use Blu Mol mandrel Internet #205623829 Model # 5546