Frequently Bought Together
Product Overview
- Wear-resistant tungsten carbide for life long cutting through abrasive materials
- 1-1/2 in. depth of cut
- Unique tooth geometry designed for aggressive cutting
- A great addition to any workshop
Specifications
Dimensions
Details
Questions & Answers
Does this cut ceramic tile using a wet saw. Don’t want to break the tile
Asked by Peggy December 30, 2020Dear Valued Home Depot Customer, We have reached out to the manufacturer and their answer is, The hole saw will not work in a wet saw. It must be used with a hole saw arbor and drill. Best to use a ½’ drill and 7/16” arbor.
What arbor is needed to use this hole saw?
Asked by Frank August 1, 2020You will need a 3/8" arbor w/ pilot bit. The Blu-Mol # 5514, E0102457 is a hex shank mandrel which includes a 3-1/4" x 1/4" pilot bit. Packed 1/box. This mandrel can be used with holes saws ranging from 9/16" to 1-3/16".
Will this bit go through plaster skimcoat
Asked by Spook54 July 2, 2020Dear Valued Home Depot Customer, We have reached out to the manufacturer and their reply is, Yes
Will this cut through glass?
Asked by battwhat June 26, 2020Although the Carbide teeth are hard enough to cut through glass the 6" Blu-Mol Xtreme Carbide Tipped Hole Saw was not designed for that purpose. The tooth shape, angle of attack and spacing, would be too aggressive and the resulting chatter would likely crack the glass.
will this cut thru stucco ?
Asked by Red April 5, 2020No, this is not recommended to be use on stucco.
I need to cut a 3-1/2 hole in 1/4 inch marble to access an electrical box. Will this bit but thru...
Asked by George March 27, 2020Dear Valued Home Depot Customer, We have reached out to the manufacturer and their reply is, You will be better off using a RemGrit Carbide-Grit Hole Saw. The individual teeth on a carbide tooth hole saw would chip and break off. We were unable to find a 3-1/2” diameter on the HD website. However, there are 3-3/8” and 3-3/4” diameter saws.
Is this product made out of one solid piece.. or is it welded
Asked by Shane January 15, 2020This product is made out of solid piece.
Will this make a hole in a cast aluminum patio table?
Asked by MilesTX September 11, 2019Yes, this will work for your aluminum patio table
what arbor will I need?
Asked by Terry August 29, 2019Product Number: 5514, Fits Bi-Metal hole saws 9/16″ – 1-3/16″ in diameter
I have a Blu-mol set that has the arbor. Your picture does not show what arbor this bit uses. How...
Asked by Paul June 10, 2019Please use Blu Mol mandrel Internet #205623829 Model # 5546
Customer Reviews
