$4042
Pay $15.42 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Heavy-duty saddle leather for durablity and steel roller buckle
- Fits 30 in. to 42 in. waist sizes
- 3 in. width at maximum and tapers to 2 in. near buckle
- View More Details
Product Details
Specifications
Questions & Answers
Jan 3, 2022
Nice belt
This is a very nice heavy duty leather belt. 40 to 54 inch which is great fir us fat guys. Gives me plenty of extra room to tighten it. strong metal buckle not one of those plastic squeeze buckles that I have had pop off on me when I bend over. Buckle is riveted on with four strong rivets so it's not going to come apart. Let's face it tool bags can get quite heavy. very happy with it.
by
Dec 30, 2021
This is a very heavy duty leather tool belt
This is a very heavy duty leather tool belt that is adjustable for waists 40 inch to 54 inch in a deep brown. I like that it is tapered from a wider back to smaller buckle area. It fits my leather tool pouch just perfect. The belt is made of very thick leather and the stitching is very heavy duty. This is the last tool belt I will every have to have for my tool pouch. This is a great product that will last a lifetime.
by
Dec 28, 2021
What Size Do You Wear?
Bottom line, yes this is a very nice tool belt. I have expectations of a high level of quality from Bucket Boss, and this item is as good as I expected. One thing that might confuse some, is what size do you need. I wear 38 inch jeans and the actual measurement of my belt is 43 inches. I mention this because the label calls this a 40 to 54 inch tool belt. I had to research belt sizing for another work belt, and Bucket Boss has labeled this product correctly, but it can still be confusing. The actual inch measurements of this belt are from 34 inches to 57 inches. If in doubt about your size, I recommend you measure the actual distance from the buckle to the hole you use on your current belt. This should be about five inches more than your jean size. In any case, this is a nice belt. I have only had it for a short time and I only carry about 4-pounds on the belt, so I am not stressing this 3-inch wide belt, but it’s working well for my uses.
by
Dec 24, 2021
Sturdy, supple leather; Lots of holes for buckle, Trimmable, Comfortable
I ordered the BUCKET BOSS Tapered Leather Tool Belt to have available to quickly attach tools and tool holders that are compatible with the 3 in wide belt. I have the Bucket Boss 10 pocket builder’s Rig Tool Belt. It is perfect for a large job needing many tools, fasteners and/or parts that you need to take to the job location in the house, yard or elsewhere, however, When working in my shop most of the tools are readily at hand, so I don’t need the added weight and bulk of the larger tool belt. There are some often-used tools I need to have on me to be efficient in the shop such as a tape measure, a small square, small one-handed clamps, screws, bolts & nuts, etc. The 3” belt is compatible with small pouches that I have had for years that are designed for a belt. The belt can fit in the belt loops of my work pants, but I choose to wear it above my pants to eliminate the need to unbuckle my pants belt and to remove the constraint of the belt loops on positioning clip on tools and pouches. It is quite comfortable in that position.
The belt is very sturdy with high quality, thick and supple leather. I got the 40” to 50” waste size. I have a 36” waist and, as I expected it would, it fit over my shirt and above my pants belt just fine as it has plenty of holes for the belt buckle. I did have to trim off a lot of excess leather so it wasn’t flapping around, but that was pretty easy with a sharp box cutter.
Now I can configure my “shop” tool belt for whatever my current project is and I still have my large Bucket Boss tool belt for the big jobs outside the shop.
by
Dec 22, 2021
Premium and Heavy Duty
Two words come to mind when I put this belt on. Premium and Heavy duty. Ok, Three words. This is a heavy duty tool belt. Sound simplistic, but this is exactly the kind of work wear that you need if you are hanging anything off of your waist on the job site. You want something that can take abuse and that will be able to carry the weight of a hammer or cordless drill. This is perfect for those slide on tool accessory pouches or clips. Most cordless tools come with a belt clip nowadays and this would be the exact belt you need for that. No more pulling your pants down with that cordless drill. Highly recommended .
by
Dec 19, 2021
Tapered leather tool belt
I fluctuate between a waist size of 42-44 so finding an adjustable tool belt that fits between 40-54 is awesome. This belt is well made and has very sturdy hardware to fasten. It is predrilled with holes to fit every size. Fits very well and you can easily slide tool attachments onto it and adjust again should the excess weight pull the belt down. Being on the smaller size for this I had excess belt, but was able to fold it back into the back of the hardware.
by
Dec 19, 2021
Very Soft and Comfortable Belt
I needed a new tool belt and decided on the Klein Tools Tapered Leather Tool Belt. It is adjustable for waist sizes 40 – 54 inches, and is made from heavy duty 3 inch wide saddle leather that tapers to another 2 inches piece for attaching to the steel roller buckle. This belt is soft leather and extremely comfortable. Unlike many other leather belts, does not gouge into your belly.
On the negative side, some of my tool pouches will not accept a 3 inch wide belt. I also plan to cut off some of the excess length, which flaps around. Overall, I am very pleased with this leather tool belt.
by
Dec 18, 2021
This is a heavy duty belt
I picked this up to use with my drill motor holder and screw pouch and it works great. It said the it fits size forty inch up to fifty four inch but it will cinch up to thirty six inch waist, probable a little smaller. I plan to trim off the excess but better to have it a little long. The belt is made of very thick hide, probably 3/16 inch thick and the stitching is heavy duty as well. The belt is about 3" wide and will not fit in regular belt loops but I would wear it on top anyway to make it easy to get off and on.
by
Dec 17, 2021
Rugged and attractive
A heavy duty work belt made of thick leather trimmed with saddle stitching. The tapered width is 2 inches near the buckle to 3 inches at the back to distribute and support the weight of a tool pouch, hammer loop, or whatever. This belt is for work use; it’s too wide for insertion into trouser loops. The rugged steel buckle has a roller and smooth rounded edges to protect the leather. Thick leather is a bit stiff. Leather conditioners such as mink oil or beeswax can be applied to enhance flexibility and improve resistance to moisture penetration. These applications typically darken the leather, and may prolong its life. It’s time to leather up! Limited 1 year warranty. Made in China.
by
Dec 17, 2021
Hard to find leather tool belt that fits 40 to 54 “ waists
My tool belt for my favorite tool pouches finally gave out, and I was unable to find a tool belt to replace it, so I have not been able to use my tool pouches that I had been using for over 30 years. Bucket Boss’s Leather Tool Belt fits the bill perfectly. It’s well, made, comfortable, strong, but not too stiff. I am quite pleased with it and put it to immediate use putting together a flat box patio set.
by
Frequently Bought Together
Price:
$4042
0/0
Compare Similar Tool Belts
 | |  |  | |
| Brand | BUCKET BOSS | BUCKET BOSS | Graintex | Klein Tools |
| Name | 2 in. Classic Series Saddle Leather Extra Large Tool Belt (Waists 37 in. to 56 in.) | Tapered Leather Tool Belt Size Medium (Waists 30 in.- 42 in.) | 10-Pocket Oil Tanned Leather Nail and Tool Pouch with Belt | Ironworker's Heavy-Duty Tie-Wire Belt, Medium |
| Price | $2093 | $4042 | $4400 | $4999 |
| Ratings | (11) | (20) | (6) | (18) |
| Material | Leather | Polyester | Leather | Leather |
| Size | XL | Medium | Large | Medium |
| Tool Belt Type | Waist Tool Belt | Waist Tool Belt | Waist Tool Belt | Waist Tool Belt |
| Tool Belt Accessories Features | No Additional Features Included | No Additional Features Included | Drill Holder,Hammer Holder,Nail Bag,Pen Holder,Pliers Holder,Ratchet Holder,Screwdriver Holder,Tape Measure Holder,Utility Knife Holder,Wrench Holder | No Additional Features Included |
| View Product | View Product | View Product | View Product |
Related Products
Explore More on homedepot.com
Hardware
Kitchen
Lighting
