Internet #307397357

Model #CM10GD+T1B

15 Amp Corded 10 in Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade and Bonus Folding-Leg Stand

  • Axial-Glide system allows wider cross cuts and better alignment
  • Upfront metal bevel controls and SquareLock precision fences
  • Includes bonus T1B folding-leg miter saw stand
  • See More Details

Frequently Bought Together

+
+
Price:
$70100

Product Overview

Bosch CM10GD 10 In. Dual-Bevel Glide miter saw delivers accuracy and cutting control at all angles, as well as durable precision throughout the life of the tool. The innovative Axial-Glide System provides wider cross-cuts, enhanced alignment and smoother glide, and the compact design takes up to 10 In. less front-to-back workspace than a slide miter saw. With a 15 Amp motor providing 4,800 no-load RPM, there is plenty of power. Adjustable miter and bevel detents enable users to make precise common miter and bevel cuts, and the override allows for easy angle adjustment. The bevel lock lever and range selector are located safely upfront so users don't have to reach around behind the saw to make a bevel adjustment. The Bosch T1B Folding-Leg Miter Saw Stand features Universal Quick-Action Tool Mounts, to fit most miter saws on the market. This includes fitting Bosch 12 In., 10 In. and 8-1/2 In. single- and dual-bevel miter saws, as well as many competitor miter saws. Once attached to the saw mounts, users can attach and remove the miter saw from the stand without tools. The stand has smooth end rollers that are adjustable in height to match the height of the user's miter saw. It features integrated repetitive stops. The dual sliding rails extend out to a total of 8-1/2 feet to support material up to 16-1/2 feet wide.
  • CM10GD: expanded cutting capacity: 12 in. horizontal capacity (nominal); 5-1/2 in. vertical capacity against the fence (base); 6 in. crown capacity against the fence (45 spring)
  • CM10GD: upfront bevel controls all-metal bevel lock lever and range selector located upfront for quick and easy bevel settings without reaching behind the saw
  • CM10GD: chop/crown lock: locks head in place for maximum chop cutting capacity for upright base molding and nested crown molding
  • CM10GD: tall sliding 4-1/4 in. fences: for easy bevel setups and increased crown and base molding capacity
  • CM10GD: large easy-to-read uniform bevel and stainless-steel miter scales: 52 left/60 right miter capacity; 47 left/47 right bevel capacity with marked detents and roof pitch angles
  • CM10GD: includes: 10 in. 60-tooth blades, material clamp, dust bag
  • CM10GD: adjustable miter detents: detents at 0, 15, 31.6, 22.5, 45, 60 right super-accurate and durable design
  • CM10GD: push-button miter detent override easy-to-access thumb actuated control right up front for fine miter angle adjustment
  • CM10GD: bevel detents: 0, 33.9, 45 left/right for accurate cuts
  • CM10GD: category best 90% dust collection optimized for cutting 2X material with a vacuum
  • CM10GD: ergonomic ambidextrous trigger handle with soft grip large form fitting ergonomic handle provides comfort for all-day use
  • T1B: quick-action universal tool mounts fit most Bosch and many competitor miter saws; saws are removable without tools; rubber feet help protect tables or benchtops
  • T1B: heights adjust to accommodate various sized saws
  • T1B: adjustable leveling foot for work on uneven surfaces
  • T1B: lightweight, durable folding legs all-steel construction for jobsite performance and compact transport or storage
  • T1B: extra wide supports accommodates larger material and workpieces
  • T1B: repetitive stops for making repetitive cuts to length



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Miter Saws

15 Amp 12 in. Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade
current product
15 Amp Corded 10 in Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade and Bonus Folding-Leg Stand
15 Amp 12 in. Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade and Bonus 32-1/2 in. Portable Stand15 Amp 12 in. Corded Dual-Bevel Sliding Glide Miter Saw Combo Kit with Bonus Gravity Rise Wheeled Miter Saw Stand
BrandBoschBoschBoschBosch
Name15 Amp 12 in. Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade15 Amp Corded 10 in Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade and Bonus Folding-Leg Stand15 Amp 12 in. Corded Dual-Bevel Sliding Glide Miter Saw with 60 Tooth Saw Blade and Bonus 32-1/2 in. Portable Stand15 Amp 12 in. Corded Dual-Bevel Sliding Glide Miter Saw Combo Kit with Bonus Gravity Rise Wheeled Miter Saw Stand
Price
$64900
$70100
$85414
$99812
Ratings
(735)
(63)
(363)
(528)
Miter Saw TypeSliding CompoundSliding CompoundSliding CompoundSliding Compound
Cordless/ CordedCordedCordedCordedCorded
Bevel TypeDualDualDualDual
Power Tool FeaturesElectric Brake,Positive StopsElectric Brake,Keyed Blade Change,Positive StopsElectric Brake,Keyed Blade Change,Positive StopsElectric Brake,Positive Stops
Maximum Cutting Thickness (in.)4644
Blade Diameter (in.)12101212
Included AccessoriesBladesAllen Key/Wrench,Bag,ClampAllen Key/WrenchLaser Guide
Cuts Through WoodWood
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
32 in
Product Height (in.)
20.5 in
Product Width (in.)
26.5 in

Details

Amperage (amps)
15 A
Arbor Size
0.625
Bevel Type
Dual
Blade Diameter (in.)
10
Color Family
Blue
Condition
New
Construction Material
Aluminum
Cord Length (ft.)
6
Corded Tool Type
Miter Saw
Cordless/ Corded
Corded
Cuts Through
Wood
Dust collection type
Port
Included Accessories
Allen Key/Wrench,Bag,Clamp
Maximum Cutting Thickness (in.)
6
Maximum Degree Miter Cuts - Left
47
Maximum Degree Miter Cuts - Right
52
Miter Saw Type
Sliding Compound
Power Source
Electric
Power Tool Features
Electric Brake,Keyed Blade Change,Positive Stops
Product Weight (lb.)
64 lb
Returnable
180-Day
Tools Product Type
Power Tool

Warranty / Certifications

Certifications and Listings
UL Listed,cULus Listed
Manufacturer Warranty
Limited 1 Year

Questions & Answers

23Questions25Answers

Will this Miter Saw Stand work for my Bosch model #4412, sliding miter saw?

Asked by Elportico13 September 29, 2020
1
Answer

Yes, the T1B Miter Saw stand is compatible with the Bosch 4412 Saw and other Bosch models such as the GCM12SD, CM12SD, CM12, CM10GD, CM8S, 4212, 4212L, 4310, 4405, 4410, 4410L, 5412, 5412L, 3912, 3915, 3918, and 3924. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Does this stand adjust for taller individuals? I am over 6 feet, and don't want to strain my back...

Asked by Kevin August 28, 2020
2
Answers

This T1B Stand has the height of 37.3" which is fixed. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Will this stand fit a Dewalt 12” Sliding Miter Saw?

Asked by KJ July 5, 2020
2
Answers

Hi there! The T1B Miter Saw Stand is compatible with Bosch Miter Saws. Other units may be compatible, but we haven't been verified for use with the T1B System. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Dual Thumb release buttons or slide release?

Asked by Kevin April 9, 2020
3
Answers

The thumb release does slide both ways for either hand.

I know the total depth of the saw is 32", but what is the distance from the very back of the saw ...

Asked by Rae October 29, 2019
2
Answers

Due to illness mine is still in its box

Replace the plastic part right by the blade to vacuum up the sawdust

Asked by Donald September 8, 2019
1
Answer

The dust port and dust container of the CM10GD are both plastic, if you want to replace those, the part numbers are 1609B00430 (connector) and 1609B04318 (container). For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

What is the maximum (board height) above the floor for the TB1/CM10 combo?

Asked by Erick January 15, 2019
1
Answer

Thank you for your question. The T1B Stand has a height of 37.3" while the CM10GD Miter Saw has 20.5". The total height of these two is 50.8". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Why are there reviews about a miter saw when this is a stand?

Asked by RonCa January 7, 2019
2
Answers

People are morons.

Can you hook up the saw to an external dust collection system? If so whale size hose connection d...

Asked by Mark December 29, 2018
5
Answers

Yes, this saw hooks up to external dust extraction. Bosch sells a hookup adaptor that fits in where the dust bag goes, not sure of the size.

Does the CM10GD have a depth stop for dados?

Asked by Bob March 18, 2018
6
Answers

Yes, the saw has depth stop for dados.

15 Amp Corded 10 in Dual-Bevel Sliding Glide Miter Saw with 60-Tooth Carbide Saw Blade and Bonus Folding-Leg Stand - page 2

Customer Reviews

  • 63 Customer Reviews
  • 4.5 out of 5 stars overall
73% of customers recommended.
Overall Ratings
5star-icon(45)
4star-icon(8)
3star-icon(3)
2star-icon(5)
1star-icon(2)
Sort By:
Since you will not stop sending the request for review... here it is. Overall, love the design of...
Since you will not stop sending the request for review... here it is. Overall, love the design of the folding raidial arm, this is the reason for recommending this saw. Home Depot worked hard to get replacement saws but they ship directly from Bosch, 3rd one was a charm. Average rating due to issues getting a good saw and dust collection performance. Pros: (after a few months to get the good saw) Accurate clean cuts Really love how the saw folds up on itself so you do not have to have a long raidial arm stick out the back, increasing the distance needed behind the saw. Cons: Saw has possibly the worst dust collection against similar saws by 4x. Dust collection comparison on YouTube by some really awesome guys, as well as, how to improve it. First saw received was broken, manufacturing defect- gulide assembly cracked. Didn't notice until I had fully aligned it - see pic. Second saw looked thrown together from scrap parts and interestingly, soon as they shipped it to me, they were out of stock - I was unable to align the saw for an accurate cut (maybe my ignorance) but it was way out of whack. Box damaged looked old and not caused by shipping. Third saw was ok. I was able to align it quickly and it performed very accurate clean cuts. This was great, because I had already built my miter bench to fit 'this' saw when I ordered it the first time, which strangely, Home Depot reps kept offering different saws as they could not understand why the bench should match the saw. - training opportunity. Home Deopt took care of me - thanks! This is not in line with my previous experience with Bosch products- but has now got me on high alert.
Was this helpful?
13
0
Barely any assembly required. Saw is easy to use, up front controls are a little complicated at f...
Barely any assembly required. Saw is easy to use, up front controls are a little complicated at first but much nicer than having to reach behind. Fits with very little overhang on a 25" counter and rotates out of the way when not in use. Blade guard has a tendency to get caught/deflect during some cuts, and there is a small amount of lateral deflection during sliding cuts. Dust collection is surprisingly good when hooked up to a Festool CT vac with a 27mm hose and expect to see even better collection with a larger diameter hose. Overall, this is a very good saw with an excellent crosscut capacity but minor deflection issues in the guard and wider cuts.
Was this helpful?
7
0
miter saw
Quality :
5
Value :
5
perfect saw for home owners and woodworks. love that it does not have the two bars for the sliding motion.
Was this helpful?
4
0
It was so worth it and so helpful to get...
It was so worth it and so helpful to get myself this stand, made my project much easier and was not hard to assemble at all!
Was this helpful?
0
0
Was this helpful?
0
0
love this saw
I upgraded from a dual bevel Hitachi to this and have not regretted it for a moment. This saw is worth every dollar. It cuts like butter, the arm allows for the saw to be built into my table with little rear clearance, dust collection works well, and it most importantly, it just works.
Was this helpful?
1
0
The arms will not sit straight making it impossible to...
The arms will not sit straight making it impossible to level the material. Disappointing as I had big hopes for this product.
Was this helpful?
0
0
Response from BoschToolsSeptember 9, 2020
Hi there! We apologize for the negative experience you had in using the T1B Stand for your saw. If the arms can't be straighten and it is within 30 days, kindly contact Homedepot for the 30 day money back or for a replacement. You can also send us the detail of your stand and the concern at boschtools@custhelp.com for available option. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Easy assembly of the few pieces that needed to be attached. The saw cuts very nicely and straight...
Easy assembly of the few pieces that needed to be attached. The saw cuts very nicely and straight. Well built and simple to use. The only negative thing is it’s dust collection. I have not tried it with a vacuum yet but just the bag it’s not the best. Overall very nice saw and does the job.
Was this helpful?
0
0
A perfect fit for my Bosch Miter. Very sturdy. It...
A perfect fit for my Bosch Miter. Very sturdy. It handled 6x8x12 lumber with ease. (Be sure to add a counterweight when working from one end with heavy lumber.)
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers