#1 Home Improvement Retailer

Internet #100670786

Model #4100

Store SO SKU #1000792164

15 Amp Corded 10 in. Table Saw Kit with 40-Tooth Carbide Blade

  • Arbor lock for single-wrench blade changes
  • 1-year manufacturer warranty
  • Home Depot protection plan
  • See More Details

Product Overview

The Bosch 10 in. Table Saw is a precise, durable and high-performing table saw. It is equipped with an innovative Modular Smart Guard System that has a quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system for superior control over the material you're cutting. All 3 elements are modular and tool-free, so you can effortlessly remove or add each one independently based on the task at hand. The blade guard is particularly user-friendly with enhanced split-guarding that offers optimal line of sight and maximum protection. The riving knife prevents the material from pinching the blade and offers positions for full upright, "splitting" and "non-thru" cutting.
  • Includes one 10 in. worksite table saw (# 4100), 10 in. 40-tooth carbide-tip saw blade, sliding miter gauge, hex key and smart guard system
  • 15 Amp motor for up to 3650 RPM to power through tough jobs
  • 10 in. blade for fast, accurate rip cuts
  • SquareLock rip fence that glides along the rail at a finger's touch or locks in place for solid and consistent cutting performance
  • Rip fence that accommodates a 12 in. left rip capacity and 25 in. right rip capacity for ripping wider materials
  • T-slot miter gauge for precise rip cuts
  • Maximum cut depth of 1-7/8 in. at 45° and 3-1/8 in. at 90° for a variety of useful cuts
  • Durable sub-base with carry handles that helps protect the tool against heavy use
  • Soft start and constant response circuitry for a quiet and smooth startup and powerful torque, while maintaining speed under load
  • Convenient on-tool storage for all attachments and tools, including the Smart Guard System, fence and miter gauge, and push stick
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Portable Table Saws

current product
15 Amp Corded 10 in. Table Saw Kit with 40-Tooth Carbide Blade
Top Rated10 in. Pro Jobsite Table Saw with Stand and 16-Gauge 2-1/2 in. Straight Finish Nailer10 in. Worksite Table Saw with Gravity-Rise StandBest Seller15 Amp Corded 10 in. Job Site Table Saw with Rolling Stand
BrandBoschRIDGIDBoschDEWALT
Name15 Amp Corded 10 in. Table Saw Kit with 40-Tooth Carbide Blade10 in. Pro Jobsite Table Saw with Stand and 16-Gauge 2-1/2 in. Straight Finish Nailer10 in. Worksite Table Saw with Gravity-Rise Stand15 Amp Corded 10 in. Job Site Table Saw with Rolling Stand
Price
Ratings
(59)
(1501)
(100)
(1440)
Cordless/ CordedCordedCordedCordedCorded
Rip Capacity - Right25 in30 in25 cm32.5 in
Included AccessoriesBlade Guard SystemStandStandStand
PortabilityBench
Table Tilt Right Max (degrees)0000
Cuts ThroughWoodWoodWoodNylon,PVC,Plastic,Wood
Work Table Surface29.0 in. x 21.5 in.in. x in.in. x in.in. x in.
Power Tool FeaturesNo Additional FeaturesBlade Guard System,Lockout Power SwitchBlade Guard SystemBlade Guard System
Blade Diameter (in.)10101010
Blade LocationLeftCenteredCenteredCentered
View ProductView ProductView ProductView Product

Specifications

Dimensions

Blade Diameter
10
Maximum Cut Depth @ 90 Deg.
3.125 in
Product Depth (in.)
38 in
Product Height (in.)
16 in
Product Width (in.)
30 in
Table Length (in.)
29.0
Table Width (in.)
21.5
Work Table Surface
29.0 in. x 21.5 in.

Details

Amperage (amps)
15
Bench & Stationary Tool Type
Table Saw
Blade Diameter (in.)
10
Blade Location
Left
Blade Speed
3650.0 RPM
Color Family
Blue
Condition
New
Construction Material
Aluminum
Cord Length (ft.)
10.0
Corded Tool Type
Table Saw
Cordless/ Corded
Corded
Cuts Through
Wood
Depth Control
Adjustable
Dust Collection Method
2.5 in. Dust Port
Horsepower (hp)
4 hp
Included Accessories
Blade Guard System
Maximum Cut Depth @ 45 Deg.
2.5 in
Maximum Speed (rpm)
3650
Portability
Bench
Power Tool Features
No Additional Features
Product Weight (lb.)
78 lb
PT Horsepower (Hp)
4
Returnable
90-Day
Rip Capacity - Left
10 in
Rip Capacity - Right
25 in
Table Tilt Left Max (degrees)
0
Table Tilt Right Max (degrees)
0
Tools Product Type
Power Tool

Warranty / Certifications

Certifications and Listings
CSA Listed,UL Listed
Manufacturer Warranty
1 Year

Questions & Answers

14Questions10Answers

Is the mitre crosscut slot accurate, parallel and a consistent width all the way thru?. I purchas...

Asked by HomeDepotCustomer January 5, 2017
1
Answer

Thank you for your question. The miter slot is parallel and consistent width throughout, not been a common compliant.

What is the wattage of this table saw?

Asked by Gen November 17, 2016
1
Answer

Thank you for your question. The 4100 table saw has a 15 amp motor so the wattage would be 2,700.

does this saw have dado blade capability?

Asked by rip November 13, 2016
1
Answer

Thank you for your question. The 4100 table saw will accept dado blades up to 13/16" wide and 8" diameter. When using dado blades the TS1007 dado insert is recommended.

Does the arbor allow a stacked dado set?

Asked by Harry August 15, 2016
1
Answer

Thank you for your question. The 4100 table saw accepts stacked dado sets up to 13/16" wide and 8" diameter. We recommend using the TS1007 dado insert assembly when using dado blades.

What is the difference between the 4100 and the 4100-009

Asked by Pat June 21, 2016
1
Answer

Thanks for your question. Both table saws are identical. The only difference is the 4100 does not come with a stand and the 4100-09 comes with the Gravity Rise stand. Otherwise the tool itself is the same.

Does this model have the digital rip fence?

Asked by TommyHonolulu October 25, 2015
1
Answer

Thank you for your question. The 4100 does not have a digital rip fence. The digital rip fence has been discontinued and is no longer available.

Is this saw 240 volt or 110

Asked by Mango6951 October 15, 2015
1
Answer

Thank you for your question. The Box 4100 table saw is 120 volts.

What is the height of the table surface when measured from the bottom surface of the base?

Asked by sjo328ci August 23, 2015
1
Answer

Thank you for your question. The height from base to table top (without the blade guard) is 11 inches.

Is this the same saw as the 4100-9? If so, why is it higher in price without the stand?

Asked by w4tpc January 9, 2015
1
Answer

The 4100 table saw is the same as the 4100-09, the only difference is the 4100-09 comes with the Gravity Rise Stand. Pricing varies on the retailer. There may have been a a special price or promotion. Currently the 4100 is priced lower than the 4100-09.

Motor HP and Dado size?

Asked by Emad August 22, 2014
1
Answer

Thank you for your question. The Bosch 4100 table saw has a 4.0 h.p. motor and will accept dado blades up to 8" diameter and 13/16" wide. We recommend using the TS1007 dado cutter insert when using a dado blade.

15 Amp Corded 10 in. Table Saw Kit with 40-Tooth Carbide Blade - page 2

Customer Reviews

  • 4.8
    out of 59 reviews
  • 97% recommend this product
Filter by:
Showing 1-10 of 59 reviews
Great Saw and Excellent Value
Did a lot of research and it was a toss up between this saw and a Dewalt. This saw performed excellent, I recently used it for reconstructing a stair case (cutting risers and treads) as well as installing laminate flooring.
by MikeP
1 person found this helpful
great saw
excellent saw the best in its field love this saw its great
by susan123
I will try it
Bosch is a good company for tools I wish I was a winner
by Weather
Response from Bosch Customer SupportAug 21, 2017
We apologize for the issue you had with your PB360C Power Box. Thank you for bringing this to our attention. We recommend an evaluation for your power box. You may fill up our E-repair form https://www.boschtools.com/boschtools-erepair/request or by calling us. This will also be forwarded to our product managers for enhancement purposes. You may contact us at 1-877-BOSCH99 (1-877-267-2499) from M-F 7a-7p CST.
Love this saw
Had the saw for 3 years. Never let me down. accurate and strong
by PabloM
Good general use saw
I bought the saw a couple of years ago and have used it quite a bit. Just finished a bed platform made with melamine. The saw did a good job cutting the melamine to final dimensions. Love the easy start feature and the stand is the best I have ever used. Very easy to get in and out of my shop and is portable so can move it to a job site easily.
by Bill45
Great job site table saw
I have only owned the Bosch 4100 job site saw for 3 weeks but so far it has exceeded my expectations. The portability is a huge plus but it cuts very smooth and accurately as well. Lifting it into the back of my truck by myself is no problem - there are plenty of hand holds so it is not an awkward effort. Storage of the fence and other attachments is another plus. I'm happy I bought the saw and I will be remodeling a Kitchen next week so it will be put through a thorough test.
by Shores GC
Great contractors saw.
I bought this saw for my shop as a second tablesaw. I found that I needed a saw to go to if I was set up on my big saw for a specific purpose and didn't want to break it down to make another cut. It has worked out great and use it oftener than originally planned. I put all the accessories on it , which are easy to install. It is attached to my Dust collection System with a 6" duct. It sets on a cabinet as the mobile base took up too much room for a permanent location. I found that the accuracy of the saw was very good right out of the box, I did not have to tune it in any way. The blade that came on the saw is of better quality than I expected, a decent blade. With the handy extensions on the left and back makes it quite versatile and compact. the digital readout (optional) for the fence is quite unique and accurate. Easy to tilt and change angles, no worry about sawdust gumming up the tilt mechanism. For a compact saw this is a real workhorse, plenty of power, and accuracy,compact and potable. Very happy with mine.
by lonedrake45
Great Contractor Saw. Very good Cabinet Saw
I bot about ten yrs ago. Have used it a lot. (Coffee and Tavern Tables, Cupboard, Settle, Mantle, Beds, Candle Stands, Windsor Chairs, etc. (Abt 80% of my furniture) I have been very happy with the saw. Rips easy, fence is good, table is pretty level. I also bot the side and back extension - highly recommend. For long rips get an adjustable height roller. Things that could be improved: 1). I always wait for blade to stop completely before picking up cut pieces. Blade takes a long time to stop turning. Needs some kind of electronic brake. 2). Mitre was very 'sloppy'. Had to add a piece of blue painters tape to each side of the mitre so it will run straight in the groove. 3). Dust collection is not that good. (Do not buy the dust collection bag - complete waist of money). Back exhaust tends to clog with thin strips. I removed the clean-out cover off the lower blade housing, and put a cardboard box under the saw for sawdust collection. Works very good. My shop is in the basement with limited space. Saw is easy to turn to diaganol angle for those longer rips. Saw is light enough to drag out of the basement when I need it outside. (Hard rubber tires would be better than air filled. They keep going flat.) Overall I have been very happy with the Bosch 40000-09 saw. Would definitely recommend.
by Wayne1
My second Bosch table saw!
I liked my Bosch 4000 table saw a little too much and it was getting tired, so I purchased the Bosch 4100, it still fits on my gravity rise stand, and has many of the great features that the 4000 had plus improvements.
by Firefly
Excellent Precision
Great features all over the saw. Never find any problems with it. The precision and details on the design are impeccable.
by Adski87
Showing 1-10 of 59 reviews