Hi there! The D-Tect 150 Wall/Floor Scanner detects ferrous and non-ferrous metals, wood, live wiring and plastic pipes — metal detection in concrete up to 6 In. deep - note that live wires may not be detected in certain conditions such as in metal conduit or behind metalized or conductive surface. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Hi there! The D-Tect 150 Wall/Floor Scanner detects ferrous and non-ferrous metals, wood, live wiring and plastic pipes — metal detection in concrete up to 6 In. deep - note that live wires may not be detected in certain conditions such as in metal conduit or behind metalized or conductive surface. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
The Bosch D-TECT 150 Multi-Scanner has the ability to detect wood substructures (studs) which can be affected by the inconsistency of the thickness of surface material, such as plaster and lath. The max detection depth for metal is up to 6", electrical copper wiring is up to 3-1/8", plastic pipes >1" is up to 2-3/8" and wood substructures up to 1-1/2". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
The D-Tect 150 Scanner has maximum detection for each material such as; Max Detection Depth Copper Wiring * Up to 3-1/8-in (80mm) Max Detection Depth Ferrous Metals (Steel) * Up to 6"" (150mm) Max Detection Depth Non-Ferrous Metals (Copper) * Up to 6"" (150mm) Max. Detection Depth (Water-Filled Plastic Pipe) Up to 2-3/8"" (60mm) Max Detection Depth Wood Substructures (Studs) * Up to 1-1/2"" (38mm) For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Hi there! The D-tect 150 Wall/Floor Scanner detects ferrous and non-ferrous metals, wood, live wiring and plastic pipes - metal detection in concrete up to 6 In. deep - note that live wires may not be detected in certain conditions such as in metal conduit or behind metalized or conductive surface. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
The Bosch D-TECT 150 Multi-Scanner has the ability to detect wood substructures (studs) which can be affected by the inconsistency of the thickness of surface material, such as plaster and lath. The max detection depth for metal is up to 6", electrical copper wiring is up to 3-1/8", plastic pipes >1" is up to 2-3/8" and wood substructures up to 1-1/2". For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.