1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. Brass SpeediOne Braided Connector and Valve
- Push to Connect system, quick and easy installation in seconds
- Braided polymer design doesn't kink or crimp
- Built to last with harsh water conditions
- See More Details
Frequently Bought Together
Price:
Product Overview
BrassCraft's push connect one-piece water supply combines their trusted brass water valve with their flexible braided polymer connector for one quick easy-to-install solution. BrassCraft's one-piece connection features push connect technology on the valve inlet and a hand-tighten wing nut on the outlet to provide a significant savings in installation time and cost. Push connect valve inlet requires no special tools to install and comes equipped with a pre-inserted tube stiffener to make the product ideal for copper, PEX and CPVC piping systems. The braided polymer fibers of the connector are designed to bend freely without kinking or crimping in tight quarters and resist corrosion caused by chemicals found in common household, tile and glass cleaners. In addition, its reinforced inner hose resists corrosion under harsh water conditions.
- 1-piece unit combines valve and supply line
- Saves time with one less connection
- No special installation tools required
- Installation ready with pre-inserted tube stiffener
- Fast, reliable and secure
- Compatible with copper, PEX and CPVC
- Remove with combination removal tool or 5/8 in. open end wrench
- Connector bends freely without kinking or crimping in tight quarters
- No-lead certified
- IAPMO and CSA listed to ASME A112.18.1/CSA B125.1
- California residents
Info & Guides
Compare Similar Supply Stop Valves
 | |  |  | |
| Brand | BrassCraft | BrassCraft | BrassCraft | SharkBite |
| Name | 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve | 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. Brass SpeediOne Braided Connector and Valve | 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Valve | 1/2 in. Push-to-Connect x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Stop Quarter-Turn Angle Stop Valve |
| Price | ||||
| Ratings | (220) | (107) | (100) | (139) |
| Connection | Comp x Comp x Comp | PTC x Comp | PTC | PTC x Comp |
| Material | Brass | Brass | Brass | Chrome |
| Indoor/Outdoor | Indoor,Outdoor | Indoor,Outdoor | Indoor | Indoor |
| Inlet Diameter (In.) | 1/2 | 1/2 | 1/2 | 1/2 |
| Application | Potable Water | Potable Water | Potable Water | Potable Water |
| Inlet Fitting End Type | Compression | FIP | Push to Connect | Push to Connect |
| Valve Configuration | Dual Outlet | Angle | Angle | Angle |
| View Product | View Product | View Product | View Product |
Compare Similar Supply Stop Valves
| | | | |
| Brand | BrassCraft | BrassCraft | BrassCraft | SharkBite |
| Name | 1/2 in. Nominal Compression Inlet x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Outlet Multi-Turn Valve | 1/2 in. Nominal Push Connect x 1/2 in. FIP x 20 in. Brass SpeediOne Braided Connector and Valve | 1/2 in. Nom Push Connect x 7/8 in. Ballcock x 12 in. SpeediOne Braided Toilet Connector and 1/4-Turn Valve | 1/2 in. Push-to-Connect x 3/8 in. O.D. Compression x 3/8 in. O.D. Compression Dual Stop Quarter-Turn Angle Stop Valve |
| Price | ||||
| Ratings | (220) | (107) | (100) | (139) |
| Connection | ||||
| Material | ||||
| Indoor/Outdoor | ||||
| Inlet Diameter (In.) | ||||
| Application | ||||
| Inlet Fitting End Type | ||||
| Valve Configuration | ||||
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Inlet Diameter (In.)
1/2
Inlet Size
1/2 In.
Outlet Diameter (In.)
3/8
Product Depth (in.)
1.1000
Product Height (in.)
1.10
Product Length (in.)
20.55
Product Width (in.)
2.40
Valve Inlet Diameter (in.)
1/2
Details
Application
Potable Water
Color/Finish
Satin Nickel Finish
Color/Finish Family
Brass
Compatible Pipe Material
Multi-Purpose
Compatible Product
Faucet,Ice Maker,Other
Connection
PTC x Comp
Features
Lead Free
Indoor/Outdoor
Indoor,Outdoor
Inlet Fitting End Type
FIP
Material
Brass
Maximum Pressure (psi)
125
Maximum Working Temperature (F)
140
Outlet Fitting End Type
FIP
Pack Size
1
Product Weight (lb.)
0.404
Returnable
90-Day
Stop Valve Type
Angle
Valve Configuration
Angle
Valve Connection
Push Connect
Valve Type
Supply Stop
Warranty / Certifications
Manufacturer Warranty
Limited Manufacturer Warranty
Questions & Answers
6Questions17Answers
Can I replace or remove the flexable water line?
Asked by Al January 23, 20202
AnswersHello Al-We do not recommend removing the flexible water connector from the stop. The stop has the supply line factory installed to create a tight seal. Please contact our Customer Support Team at 877-272-7755 if you have any other questions.
how do you uninstall it and replace it with the same one.
Asked by Tommy September 14, 20174
AnswersYou would need a special little tool that is also sold at Home Depot
this is work on polybutylene pipe
Asked by rod January 23, 20172
AnswersYes
is this for a kitchen faucet? have standard 3 hole 8" on center. i fear this is for a toilet
Asked by mike December 31, 20145
AnswersYes, as long as it has the 1/2 threads
Are these lead free as required by Federal law?
Asked by Bob December 23, 20141
AnswerBobT, Thank you for your question. Yes, this SpeediOne Braided Connector & Valve, along with all of our water stops and water connectors, is certified lead free for state and national low-lead requirements. If you have any other questions about BrassCraft water supplies, please do not hesitate to contact our Product Experts toll free at 877-272-7755.
Is this certified for hot water applications?
Asked by GoletaCA December 23, 20143
AnswersYes, hot or cold
Customer Reviews
Dec 11, 2020
Doesn’t fit universal toilet flange kit
This is the second time I buy TWO STANDARD universal items from Home Depot that are incompatible with each other. I purchased a universal Fluid Master toilet flange replacement kit and this shut off valve for toilets. You cant remove these shut off valves from the copper pipe once they’re on and unfortunately, i put the shutoff valve end on first... onky to discover the other end didnt fit the connection to the “universal” tolet fitting. Now this item is stuck on my already small copper pipe that I can not afford to cut
by Felix
Response from BrassCraft MfgDec 15, 2020
Hello Felix - We do have removel tool that will help you, part number PCT-10-6 that can be purchased at your local Home Depot or Home Depot.com. Position the stop firmly in your palm. Using the combination removal tool, snap tool onto the tube with lettering facing away from the stop. With two fingers depress removal collar back towards stop and pull from tubing. Ensure that the 3/8" OD side on the tool is facing away from the palm. If you have any additional questions or concerns, please do not hesitate to reach out to our Customer Support Team toll-free at 877-272-7755.
May 9, 2018
We used this to replace the line for our rv toilet. Worked perfectly. No leaks!
We used this to replace the line for our rv toilet. Worked perfectly. No leaks!
by DIYTUT
Response from BrassCraft MfgMay 15, 2018
Hello DIYTUT-Thank you for your review and choosing our products. We are happy our G2PS19B200HX F worked well for you. We look forward to you choosing BrassCraft products in the future!
Apr 10, 2021
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Response from BrassCraft MfgApr 12, 2021
Thank you for your review. If you have any questions on our products or need assistance in selection, please contact one of our Customer Support Representatives at 877-272-7755.
Jan 29, 2021
I did not get to use it for a few...
I did not get to use it for a few reasons, the old fittings had been welded on and I didn’t need such a long hose. Apart from that I loved the push to connect, high quality hose (though not very flexible), they seem pretty heavy duty and good quality. I will consider the style for future projects with better preparation.
by Jjms
Jan 29, 2021
After getting it home I read that it shouldn't be used with a hot water recirculation pump over 1...
After getting it home I read that it shouldn't be used with a hot water recirculation pump over 115 - I checked my hot water - it was 137 so I couldn't use it. This information should have been in BOLD print that I could see before I bought it
by GR
Explore More on homedepot.com
More Products
Home and Kitchen Appliances
Lifestyle
Outdoor Living
Lumber, Building Materials and Safety Equipt
Top Brands