Internet #100190871

Model #PSSD-43

Store SKU #145881

Store SO SKU #1000292531

1/2 in. O.D. Flare x 1/2 in. MIP Steel Gas Fitting

  • Durable steel construction resists temperatures up to 150F
  • Corrosion-resistant coating ensures long-lasting use
  • Fixes on to 1/2 in. O.D. gas systems
  • See More Details

Frequently Bought Together

+
+
Price:
$485

Product Overview

BrassCraft's Steel Male Gas Fitting adapts gas connector nut to appliance inlet or gas supply. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 1/2 in. O.D. gas connectors for appliances with moderate BTU demands such as a four-burner stove, water heater or dryer.
  • California residents
  • Use with 1/2 in. O.D. gas connectors
  • Steel with corrosion resistant coating
  • For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures
  • Temperature rating: -40° to 150°F
  • Pressure rating: standard line pressures up to 1/2 psi maximum

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Gas Fittings & Connectors

current product
1/2 in. O.D. Flare x 1/2 in. MIP Steel Gas Fitting
3/8 in. O.D. Flare x 3/8 in. FIP Gas Connector5/8 in. O.D. Flare (15/16-16 Thread) Steel Gas Fitting Kit with 1/2 in. FIP and 1/2 in. MIP Connections2 oz. Gas Leak Detection Solution
BrandBrassCraftBrassCraftBrassCraftBrassCraft
Name1/2 in. O.D. Flare x 1/2 in. MIP Steel Gas Fitting3/8 in. O.D. Flare x 3/8 in. FIP Gas Connector5/8 in. O.D. Flare (15/16-16 Thread) Steel Gas Fitting Kit with 1/2 in. FIP and 1/2 in. MIP Connections2 oz. Gas Leak Detection Solution
Price
$485
$745
$868
$898
Ratings
(7)
(0)
(1)
(2)
Material BrassStainless steelOther
View ProductView ProductView ProductView Product

Specifications

Dimensions

Inner diameter (in.)
0.408
Outer diameter (in.)
0.5
Product Depth (in.)
1.375
Product Height (in.)
6.8
Product Length (in.)
6.8
Product Width (in.)
3.188

Details

Connection type
Flare x MIP
Gas Vent Pipe and Fittings Accessory Type
Gas Fitting
Inner material
Stainless steel
Maximum Pressure (psi)
0.5
Maximum Working Temperature (F)
150
Minimum working temperature (F)
-40
Outer Material
Stainless steel
Product Weight (lb.)
0.1406
Remote Access
No Remote Access
Returnable
180-Day

Warranty / Certifications

Certifications and Listings
CSA Listed
Manufacturer Warranty
Limited Manufacturer Warranty

Questions & Answers

1Questions1Answers

Is this the right kind of fitting to widen the hose for a propane stove?

Asked by khira320 January 14, 2014
1
Answer

Dear khira320, Thank you for your question. Our gas connectors are approved for use with both LP & natural gas. To properly size a gas connector to your stove, you must first know the BTU rating of the new appliance. This rating can be found on the manufacturer's label or in the owner’s manual. The 2nd piece of info that you need is the length of connector that will allow you to safely access behind the appliance without stretching or damaging the connector. Match the stove’s BTU rating to the rating on the connector at your required length (see attachment - LP gas). The adaptors / gas fittings are sized to the inlet of the appliance & the outlet of the gas supply / ball valve. So the threads on this fitting should mate with the inlet of your gas appliance. For more information on how to select the proper gas connector & fittings, please visit BrassCraft’s video library or contact one of our Product Experts at 1-877-272-7755. Detailed instructions are also attached below. Thank you again,

Customer Reviews

  • 7 Customer Reviews
  • 4.8 out of 5 stars overall
67% of customers recommended.
Overall Ratings
5star-icon(5)
4star-icon(2)
3star-icon(0)
2star-icon(0)
1star-icon(0)
Sort By:
Was this helpful?
0
0
1/2" MIP side tapped for 3/8" on the inside
Quality :
5
Value :
5
I had an unused 1/2" OD brasscraft gas line that I bought for a stove that was incorrectly sized. I got a new gas dryer and needed to adapt to the 3/8" male gas fitting on it. To my surprise I couldn't find anything to adapt to it. However, I realized that this is exactly what you need. The 1/2" MIP side, is also tapped on the inside of the fitting for 3/8". This then goes into the 1/2" OD flare fitting on the gas line. Perfect, just wish it was described that way!
Was this helpful?
1
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Works well ...
Works well
Was this helpful?
0
0
It was what I needed for my gas supply installation...
It was what I needed for my gas supply installation Thanks
Was this helpful?
0
0
When I replace my water heater controller, the existing gas fitting stuck to the inlet too tight...
When I replace my water heater controller, the existing gas fitting stuck to the inlet too tight that it was impossible to remove it without breaking the plastic housing. Besides, the plumber put pipe dope on the flare end. So, I just throw away the old fitting, and I put the new fitting in the new controller. So, there is no need to replace the gas hose. Test the new connection with soapy water, and no leak.
Was this helpful?
0
0
It's exactly what I need
Appearance :
5
Quality :
5
Value :
5
When I bought a new gas range, they recommend me to buy a new hose set too. I found I actually need the adapter only and HD has it.
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers