#1 Home Improvement Retailer

Internet #203139191

Model #B1-16DL F

Store SKU #1000011539

3/8 in. Compression x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector

  • Corrosion-resistant design provides a long-lasting use
  • Connects the water supply to your toilet
  • Polymer fibers bend freely without kinking or crimping
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

BrassCraft Speedi Plumb Plus 3/8 in. compression inlet x 7/8 in. ballcock Nut outlet x 16 in. of length flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to your toilet, this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping. Connection to toilet features hand-tighten wing-nut for quick and easy installation.
  • 16 in. of length connector with 3/8 in. compression connection to water shut-off valve
  • Connects to standard toilet 7/8 in. ballcock inlet, hand-tighten wing nut for quick and easy connection
  • Bends freely, without kinking or crimping, installation is easier, especially in cramped quarters
  • External corrosion resistance to common household, tile and glass cleaners
  • Internal corrosion resistance to harsh water conditions
  • 8-sided pneumatic crimp for greater dependability and reliable nut-to-hose connections
  • Temperature rating: 40 Degree to 140 Degree F, intermittent to 180 Degree F
  • Pressure rating: 125 psi maximum
  • No-lead certified
  • IAPMO and CSA listed to ASME A112.18.6/CSA B125.6
  • Note: product may vary by store
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Supply Lines

1/2 in. Compression x 7/8 in. Ballcock Nut x 12 in. Braided Polymer Toilet Connector
current product
Top Rated3/8 in. Compression x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector
1/2 in. FIP x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector1/2 in. Flare x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector
Brand BrassCraftBrassCraftBrassCraft
Name1/2 in. Compression x 7/8 in. Ballcock Nut x 12 in. Braided Polymer Toilet Connector3/8 in. Compression x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector1/2 in. FIP x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector1/2 in. Flare x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector
Price
Ratings
(178)
(2161)
(90)
(4)
Product Length (in.)12161.1316.750 in
Tube Diameter (in.)0.5500.5500.5500.550
Outlet Fitting End TypeBall cock threadBall cock threadBall cock threadBall cock thread
Inlet Fitting End TypeCompressionCompressionFIPFlare
Plumbing Part TypeSupply LineSupply LineSupply LineSupply Line
View ProductView ProductView ProductView Product

Specifications

Dimensions

Inlet Diameter (In.)
5/16
Outlet Diameter (In.)
9/16
Product Depth (in.)
1.125
Product Length (in.)
16
Product Width (in.)
1.5
Tube Diameter (in.)
0.550

Details

Color Family
Silver
Color/Finish
Silver
Features
Flexible
Fitting Material
Brass
Inlet Fitting End Type
Compression
Maximum Pressure (PSI)
125
Outlet Fitting End Type
Ball cock thread
Pack Size
1
Plumbing Part Type
Supply Line
Returnable
90-Day

Warranty / Certifications

Certifications and Listings
CSA Certified,IAPMO Certified
Manufacturer Warranty
Limited Manufacturer Warranty

Questions & Answers

34Questions29Answers

What size washer goes on the side that connects to the supply valve? Mine is missing the washer.

Asked by Rfar May 12, 2021
1
Answer

Hello Rfar The washer is built into the part. If you feel yours needs one, please return the item to the point of purchase and get a new one. Or, if you have any other questions, we would like to gather more information from you to best assist you. Please contact one of our Customer Support Team Members at 877-272-7755 and reference this review.

Can this be use to connect the sink faucets? Can the washer inside the plastic nut be replaced?

Asked by limited March 29, 2021
2
Answers

Thank you, can you give me a part number that is used for connection a bathroom sink faucet to the stopcock.. can it have the hand tight type of connector as I can not get a tool up to the faucet to tighten it?

i want to cancell this order for the brass craft

Asked by SIS January 27, 2021
2
Answers

My bidet is so powerful due to this connector. If you need some extra hp for your mess. Get this.

The connection to the toilet is leaking. Dripping when I flush the toilet. I will take it off and...

Asked by Judy November 28, 2020
2
Answers

There are a few reasons why it is leaking. Most commonly is the plastic nut on the supply hose is not tight enough or you have connected the hose slightly crooked and the connecting nut has cross threaded on to the connection to the tank valve. That will damage the threads a little. So do remove the hose from the toilet, make sure all the threads on both the hose and the plastic pipe coming down from the tank are clean. Teflon tape is good with two wraps maximum. The plastic nut on the hose should thread easily onto the tank connection. Hand tighten firmly and you should be good to go. Be sure the hose nut is going on straight. If it continues to leak you may not have a good seal with the valve on the inside of the tank.

does it come with a rubber seal, a rubber o?

Asked by Alex September 26, 2020
1
Answer

Hi Alex - Thank you for your question. The black o-ring is in the ballcock nut end of the connection. If you have any other questions on our products or need assistance in selection, please contact one of our Customer Support Representatives at 877-272-7755.

Why is the description say 3/8 in but the specs say Inlet Diameter (In.) 5/16?

Asked by DIYBill May 22, 2020
1
Answer

Hi Skippy, For the 3/8", the Inside Diameter is 5/16 If you have any further questions, please call one of our Customer Service Representatives toll-free at 877-272-7755. Thank you, Brasscraft

How can I see what aisle this item is in at my local store

Asked by RaymondPross May 21, 2020
1
Answer

Hello Mr. Pross, We at BrassCraft cannot direct you to the specific aisle of Home Depot for a part. But a store representative would be more than happy to direct you to the correct aisle for your needs. Thank you, Dale W. BrassCraft

The old hose had a barrel type brass end on the cut off can i use this hose as a replacment ?

Asked by Johnny May 17, 2020
4
Answers

Yes. I had the same setup that I replaced with this hose.

Should you use thread tape with these or not?

Asked by Bill January 26, 2020
5
Answers

No taping required

Do you need something to put on the connectors - like putty to seal the connections?

Asked by Halotraveler July 1, 2019
10
Answers

No

3/8 in. Compression x 7/8 in. Ballcock Nut x 16 in. Braided Polymer Toilet Connector - page 2

Customer Reviews

  • 4.7
    out of 2,161 reviews
  • 93% recommend this product
Filter by:
Showing 1-10 of 2,161 reviews
Easy to replace. Hand tight to tank connection. Hand tight...
Easy to replace. Hand tight to tank connection. Hand tight plus 1 flat to water supply valve.
by LouM
No issues with Toto Washlet tee
I recently got a Toto Washlet and since the tee shortens the distance to the shut-off, I felt like the old 12" line would kink or there would be stress points. I was able to put in this 16" line so that there's a graceful loop. Other than that, it's pretty much a regular toilet supply line.
by Dan
1 person found this helpful
Just put in a bathroom toilet in basement. Great price. Sturdy and does not leak.
Just put in a bathroom toilet in basement. Great price. Sturdy and does not leak.
by ELAINE
Quality product, no thread sealant required. Hand tighten ballcock end to toilet, snug other end...
Quality product, no thread sealant required. Hand tighten ballcock end to toilet, snug other end to shutoff valve. No leaks or drips.
by Bama
Easy to install. No leaks.
Easy to install. No leaks.
by Mstan55
5 people found this helpful
It made for a quick and easy install.
It made for a quick and easy install.
by Mark
Great price, plenty of lengths in stock in-store for a quick and easy fix.
Great price, plenty of lengths in stock in-store for a quick and easy fix.
by blueimp
3 people found this helpful
Easy to install, very flexible, no leaking.
Easy to install, very flexible, no leaking.
by txgent10
Response from BrassCraft MfgMar 23, 2020
Hello Txgent10,

Thank you for giving us a great rating and recommending our product to others. Call our Customer Support Team at 877-272-7755 if there is anything, we can help you with.

Sincerely,
BrassCraft
1 person found this helpful
I had to replace the water connector for 2 toilets recently. The first one 6 months ago. Since it...
I had to replace the water connector for 2 toilets recently. The first one 6 months ago. Since it was an easy job and it seems to work well we choose the same product this last time.
by Mimi
Durable, flexible, perfect application.
Durable, flexible, perfect application.
by HLeo
2 people found this helpful
Showing 1-10 of 2,161 reviews