#1 Home Improvement Retailer

Internet #205558299

Model #PM15X113

Store SKU #1001045463

Store SO SKU #202214674

4 ft. Gas Range Connector Kit with Auto Shut Off

$3398
  • Restricts and avoids hazardous build-up of gas immediately
  • Ideal for indoor or outdoor use
  • Measures 48 in. L
  • See More Details
Store
0 in stock
Text to Me

Frequently Bought Together

+
+
Price:
$3398

Product Overview

The gas connector kit allows for immediate action restricting gas flow. This helps to avoid a hazardous build-up of gas. In the event of a rupture or disconnect, unrestricted gas flow forces the plate away from the magnet and firmly positions it against the seat.
  • The gas connector kit allows for immediate action restricting gas flow; this helps to avoid a hazardous build-up of gas
  • Step-by-step instructions
  • For indoor or outdoor use
  • 48 in. of length
  • California residents

Specifications

Dimensions

Product Depth (in.)
12
Product Height (in.)
0.9
Product Width (in.)
10.5

Details

Appliance Category
Appliance Parts
Appliance Type
Part/Accessory
Brand Compatibility
Fits most major brands of gas ranges
Compatible Appliance Type
Range
Hardware Included
Yes
Model Compatibility
Fits most major brands of gas ranges
Part Type
Other
Returnable
90-Day
Stove Part Type
Installation Kit

Warranty / Certifications

Manufacturer Warranty
1 year limited warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.4
    out of 255 reviews
  • 90% recommend this product
Filter by:
Showing 1-10 of 255 reviews
I thought it was maybe excessively long and stiff. When I went to push the stove into place I tho...
I thought it was maybe excessively long and stiff. When I went to push the stove into place I thought the hose would kink. But I was able to reposition it before I pushed it all the way back against the wall. It basically goes straight up and straight down and flows perfectly.
by 1HDshopper
  • Verified Purchase
  • Recommended Product
Not a lot of info provided about this kit. This is what I have found out about it: This kit is eq...
Not a lot of info provided about this kit. This is what I have found out about it: This kit is equivalent to the Brasscraft PSC1107 kit, and is intended for higher gas flow rates need for appliances that have an input rating of 65,000 – 106,000 BTUs (larger gas range or furnace), but can be used for smaller appliances if they have the right thread sizes. The kit includes Brasscraft parts: (1) CSSC54R-48 5/8" OD (15/16-16 Thread) x 48" yellow coated stainless steel gas connector (1/2” ID flex tube with flare fittings on both ends), an MRU2-10-12 Safety+PLUS EFV ¾” MIP (½” FIP tapped) valve, and an MAU2·10·8S ½" MIP (3/8” FIP tapped) steel fitting. (1) an MAU2-10-12S ¾” MIP (½" FIP tapped) steel fitting. (1) 3mil tube of pipe thread sealant. (1) 3mil tube of leak detection solution. The connector (flex tube with flare nuts) goes between a gas shut-off valve (or gas supply pipe) and an appliance by using two fittings, which go between the flare nuts on the connector and the shut-off valve on one end, and the appliance on the other end. To connect from the gas supply pipe/shut-off valve to one of the flex connector flare nuts, screw the Safety+PLUS Excess Flow Valve into a ¾” FIP shut-off valve or ¾” pipe coupling on one end and into the flex tube flare nut on the other end. If you choose not to use the Safety+PLUS Excess Flow Valve on the supply side of the connector, you can substitute it with the MAU2-10-12S fitting, which has the same thread sizes as the Safety+PLUS valve. To connect from the appliance to the flex connector flare nut, use the MAU2-10-8S fitting (assuming the appliance has a ½” FIP fitting on it). The fitting has the 5/8” OD flare thread on one end, and a ½” MIP and 3/8” FIP tapped threads on the other end. So the connection goes like this: gas supply pipe/shut-off valve  Safety Valve or MAU2-10-12S  flex tube with flare nuts  MAU2-10-8S  appliance Always screw and tighten the fittings into the gas supply pipe/shut-off valve and appliance BEFORE connecting and tightening the flex tube flare nuts onto the fittings. Brasscraft also has the MAU2 fittings made with brass instead of steel that you can purchase separately if you would prefer brass over steel. The flare fittings are to be torqued to 250-520 in-lbs (~20-40 ft-lbs).
by DIYer
    • Recommended Product
    40 people found this helpful
    It was just what I needed and worked great. Thank...
    It was just what I needed and worked great. Thank you!
    by Stove
    • Verified Purchase
    1 person found this helpful
    by TIMOTHY
      I should have saved money and just bought the line! The safety valve and other fitting were the w...
      I should have saved money and just bought the line! The safety valve and other fitting were the wrong size for the stove and shutoff valve.(to large)
      by Chas
      • Verified Purchase
      Rating provided by a verified purchaser...
      Rating provided by a verified purchaser
      by HomeDepotCustomer
      • Verified Purchase
      THE KIT DID NOT INCLUDE THE CORRECT 3/8 ADAPTER TO...
      THE KIT DID NOT INCLUDE THE CORRECT 3/8 ADAPTER TO CONNECT MY NEW GAS RANGE TO THE PROPANE GAS LINES SHUT OFF VALVE.
      by HomeDepotCustomer
      • Verified Purchase
      Rating provided by a verified purchaser...
      Rating provided by a verified purchaser
      by HomeDepotCustomer
      • Verified Purchase
      sturdy and perfect fit
      sturdy and perfect fit
      by Samie
      • Verified Purchase
      • Recommended Product
      This is what all you need for your application to...
      This is what all you need for your application to hook up to the gas line
      by CHRISTOPHER
      • Verified Purchase
      Showing 1-10 of 255 reviews