#1 Home Improvement Retailer

ProCoat 1/2 in. FIP x 1/2 in. MIP x 12 in. Stainless Steel Gas Connector 1/2 in. O.D. (102,000 BTU)

$1180
  • Gas connector used for natural and LP gases
  • Easy install with smoother, burnished connector ends
  • ProCoat yellow coating resists harsh chemicals and conditions
  • View More Details
caret

Product Details

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
  • 3/8 in. I.D. (1/2 in. O.D.) corrugated stainless steel with corrosion resistant coating
  • Steel fittings included: 1/2 in. FIP and 1/2 in. MIP (tapped 3/8 in. FIP)
  • ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
  • Use with natural and LP (propane) gases
  • 100% leak tested
  • Approved for indoor and outdoor use
  • Temperature rating: -40° to 150°F
  • Pressure rating: 1/2 psi maximum
  • CSA certified
  • Return Policy
  • California residents
caret

Specifications

caret

Questions & Answers

1Questions
caret
Q:Can this be used for. 50 gallon water heater
by|Dec 19, 2022
1 Answer
Answer This Question

A:  Hello, Thank you for your question. We would require more information to determine if our Connector (or other product) is designed for that use. Please contact our Customer Support Team at 877-277-7755 and reference this review.

by|Dec 19, 2022
    Showing 1-1 of 1
    caret

    Customer Reviews

    4 out of 5
    (2)
    • 4
      out of 2 reviews
    • 100% recommend this product
    Filter by:
    Showing 1-2 of 2 reviews
    by
    • Verified Purchase
    Actually needed a connector with MIP fittings on both ends. It was not available to order, so I h...
    Actually needed a connector with MIP fittings on both ends. It was not available to order, so I had to buy this assembly and a separate MIP fitting.
    by
    • DIY
    • Verified Purchase
    • Recommended
    Showing 1-2 of 2 reviews

    Compare Similar Gas Fittings & Connectors

    current product
    ProCoat 1/2 in. FIP x 1/2 in. MIP x 12 in. Stainless Steel Gas Connector 1/2 in. O.D. (102,000 BTU)
    ProCoat 1/2 in. FIP x 1/2 in. FIP x 18 in. Stainless Steel Gas Connector 1/2 in. O.D. (93,100 BTU)ProCoat 3/4 in. MIP x 3/4 in. MIP x 12 in. Stainless Steel Gas Connector 5/8 in. O.D. (180,000 BTU)ProCoat 1 in. FIP x 1 in. MIP x 18 in. Stainless Steel Gas Connector 3/4 in. I.D. (290,900 BTU)
    BrandBrassCraftBrassCraftBrassCraftBrassCraft
    NameProCoat 1/2 in. FIP x 1/2 in. MIP x 12 in. Stainless Steel Gas Connector 1/2 in. O.D. (102,000 BTU)ProCoat 1/2 in. FIP x 1/2 in. FIP x 18 in. Stainless Steel Gas Connector 1/2 in. O.D. (93,100 BTU)ProCoat 3/4 in. MIP x 3/4 in. MIP x 12 in. Stainless Steel Gas Connector 5/8 in. O.D. (180,000 BTU)ProCoat 1 in. FIP x 1 in. MIP x 18 in. Stainless Steel Gas Connector 3/4 in. I.D. (290,900 BTU)
    Price
    $1180
    $1292
    $1393
    $2322
    Ratings
    (2)
    (0)
    (0)
    (0)
    View ProductView ProductView ProductView Product