Internet #205964212

Model #QKN60S

QuicKit 60 CFM 2.5 Sones 10 Minute Bathroom Exhaust Fan Upgrade Kit

  • NuTone replacement motor wheel req. no drywall/ductwork changes
  • Increase performance without replacing the entire unit
  • Easy to install and/or replace existing product for DIY'ers
  • See More Details
$4247

Frequently Bought Together

+
+
Price:
$4247

Product Overview

Upgrade your current bath fan with stronger airflow and quieter performance in 10 minutes or less. The NuTone QuicKit provides up to 45% more powerful ventilation and up to 35% less sound than vent fans typically installed in small bathrooms, laundry closets and utility rooms. Simply snap out the current motor plate assembly and snap in the new one. No attic access is required; your existing fan housing stays in place and no wiring is necessary.
  • 60 CFM, sufficient ventilation to remove odors and pollutants from your smaller powder room and bathroom
  • 2.5 sones for quiet performance, enough sound to know your fan is on
  • Brighter white grille blends well with any decor
  • Torsion spring grille mounting, no tools required
  • QuicKit includes a galvanized steel motor plate is designed to accommodate a variety of economy fan models
  • Can be used to upgrade Broan 670, 671, 688, and 689
  • Can be used to upgrade NuTone fan models 695-R03 and 696N-R03 manufactured after the year 1999, with a fan housing of 7.5 in. x 7.25 in.
  • Can be used to upgrade Nautilus N671 and N688
  • All air and sound ratings are HVI Certified
  • Unit is U.L. Listed
  • Single-pack configuration (also available model QKN60 4-pack)
  • Shop all Broan-NuTone Bathroom Exhaust Fans
  • For any questions regarding product features, installation, or specifications, please call our Technical Services Dept. at 800-637-1453, Monday-Friday, 8:00 am – 7:00 pm EST.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Bathroom Fan Parts

Replacement Motor and Impeller for 659 and 678 Bathroom Exhaust Fans
current product
QuicKit 60 CFM 2.5 Sones 10 Minute Bathroom Exhaust Fan Upgrade Kit
Sensonic Speaker Kit with Bluetooth Wireless Technology for QT Series Bathroom Exhaust Fans
BrandBroan-NuToneBroan-NuToneBroan-NuTone
NameReplacement Motor and Impeller for 659 and 678 Bathroom Exhaust FansQuicKit 60 CFM 2.5 Sones 10 Minute Bathroom Exhaust Fan Upgrade KitSensonic Speaker Kit with Bluetooth Wireless Technology for QT Series Bathroom Exhaust Fans
Price
$1999
$4247
$9355
Ratings
(978)
(293)
(7)
Part/Accessory TypeMotorUpgrade KitUpgrade Kit
View ProductView ProductView Product

Specifications

Details

Brand/Model Compatibility
Some NuTone, Nautilus, and Broan fan models with housing dimensions of 7-1/2 in. x 7-1/4 in.
Part/Accessory Type
Upgrade Kit
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
Limited 1 year

Questions & Answers

98Questions13Answers

I have one of these , I put it in in less than 10 minutes then took shower had it run for maybe 1...

Asked by Nickster99 October 24, 2020
0
Answers

Will QKN60S fit into the Nutone Mercury 695M-B Unit housing?

Asked by JackL October 10, 2020
1
Answer

The QKN60S does not fit into a model 695M-B. The correct motor for a 695M is part number S61312000 and the correct blower wheel is part number S82403000. You will most likely need to reuse your existing motor mounting plate as that part is obsolete and may no longer be available.

Will it fit I have model 676-d2676f-a

Asked by Ed September 19, 2020
1
Answer

The 676 unit has a different size housing. THe QKN60S can be used to upgrade Broan® 670, 671, 688, and 689; NuTone® fan models 695-R03 and 696N-R03 manufactured after the year 1999, with a fan housing of 7.5" X 7.25"; and Nautilus N671 and N688. Customer Service Department at 888-336-3948 for assistance with obtaining replacement parts on Broan-NuTone products.

Will this work on my Broan 671H?

Asked by Maddie September 10, 2020
1
Answer

Yes, the QKN60S Quickit does fit into model 671-H which has a housing that measures 7-1/4" x 7-1/2" x 3-5/8"

Will this work with Model NUA-40?

Asked by Jane September 8, 2020
2
Answers

This Upgrade Kit will not work with model NUA-40. Please call Technical Support at 888-336-6151 to identify replacement parts for model NUA-40.

Is there a upgrade kit for a NuTone 684NT?

Asked by Dee September 5, 2020
1
Answer

The 684NT operated at 80 CFM, 2.5 sones. We do not offer an upgrade kit, however, you are welcome to contact our Customer Service Department at 888-336-3948 for assistance with obtaining replacement parts for that model.

can this be used if there is no current duct work to the attic?

Asked by customerS August 12, 2020
2
Answers

No, it needs to vent out through the attic and then outside. It needs to have duct work and if you are going to put that in, you should buy a better fan. I still recommend this, but we have replaced it twice. Its an inexpensive quick fix and does not require going into the attic to install if there is already a fan in place.

will it replace a nutone 8814 exhaust fan?

Asked by Ronnied August 5, 2020
1
Answer

No, it will not. Please contact our Customer Service Department at 888-336-3948 for additional assistance.

Will this fit the Nutone 689K?

Asked by aussie July 4, 2020
3
Answers

Yes, it will.

I hv an Aubrey 7550 120v 50 cfm 2.5 sones exhaust fan that i want to replace not the housing What do u recomend

Asked by SV June 11, 2020
1
Answer

We offer a few replacement parts for the 7550 fan. Outside of those, you would need to replace the entire unit, including the housing. Please contact our Customer Service Department at 888-336-3948 for assistance.

QuicKit 60 CFM 2.5 Sones 10 Minute Bathroom Exhaust Fan Upgrade Kit - page 2

Customer Reviews

  • 302 Customer Reviews
  • 4.2 out of 5 stars overall
81% of customers recommended.
Overall Ratings
5star-icon(170)
4star-icon(72)
3star-icon(19)
2star-icon(12)
1star-icon(29)
Sort By:
Somewhat quick replacement
Quality :
5
Value :
4
I replaced are almost 21 year old 688 Broan 50CFM fan after gradually getting loader to the point it stopped working correctly. The replacing part was relatively simple. Unplug and pop out the old one and pop in the new one and plug it in. The squirrel cage is about 1/8 inch wider in diameter than the old paddle wheel but still clears the old housing and the motor is a little taller than the old one but hangs down into the new cover. The only problem is installing the cover with the housing recessed above the sheet rock. Though the wire hangers are about a 1/2 inch longer, when squeezed closed, than the old ones there is not enough room between the ceiling and the cover for fingers due to the deeper cover. Simple fix is I just have to use needle nose pliers now to remove and install the cover for cleaning which wasn't necessary before. All in all a great simple upgrade from the old worn out fan, with 50 CFM and 2.0 sones, to the new fan with 60 CFM and 2.5 sones, which seems quieter than the old one was when it was new.
Was this helpful?
1
0
Excellent and efficient product.
This product was brilliantly designed. NuTone understands customer service and the homeowner. This NuTone QuicKit 60 CFM Bathroom Exhaust Fan Upgrade Kit was very easy to install as it was a perfect replacement of the original exhaust fan housing. I thought that I would have to remove the existing housing in order to accommodate the new fan, possibly damaging the newly installed ceiling paneling, but that was not necessary. Thank You NuTone for saving me time on my bathroom redesign project.
Was this helpful?
1
0
Easiest project I have ever done
I was skeptical at first that it would be only a 10 minute bathroom fan upgrade. Well it was not 10 minutes. It was approximately a two minute upgrade. Yes two minutes and the job is finished. You pop off your cover, you unplug it, you stick a screwdriver and remove the old fan unit. You Then pop the new unit in, plug it in and put the New cover on and you are done. It was literally the easiest job I’ve ever done upgrading something in my house or replacing a broken item
Was this helpful?
3
0
Exhaust replacements x3
Great product. Quick. By third replacement down to 5 min. Its smooth sound, softer than old exhaust fans that came with house. Perfect replacement
Was this helpful?
1
0
Quick and easy install. Moves more air and quieter than the original fan. Also installed optional...
Quick and easy install. Moves more air and quieter than the original fan. Also installed optional LED light cover.
Was this helpful?
1
0
It took 5 minutes...to install and was so much quieter then the old noisy 4 sones!! Our landlord ...
It took 5 minutes...to install and was so much quieter then the old noisy 4 sones!! Our landlord and neighbor thanks us ; Exactly what we needed , thank you for are life a little better !
Was this helpful?
0
0
I have installed previous versions of this Upgrade Kit before. This one was just as easy to inst...
I have installed previous versions of this Upgrade Kit before. This one was just as easy to install as the others. The only problem I had was installing the new cover. I finally gave up and installed the old one of similar design. Those springs are difficult to get into place with my large hands. This new one doesn't sound as loud as the old one so I assume it runs at a little slower speed. I checked though and it moves air just fine. I wish some other companies would manufacture bath and kitchen fans with replaceable workings like this. It is so much easier than climbing into the attic space above and modifying an opening for a newer or different style fan. All in all, I really like being able to replace and upgrade this fan.
Was this helpful?
0
0
Easy retrofit
Quality :
4
Value :
4
Seeds Program Review
(What's this)
I had a combination fan and light kit that I installed about eight years ago. The fan motor sounded awful and the finish was failing. I was not sure of the manufacturer so when I saw this item I took a chance and picked it up. Luck smiled upon me and the fixture that needed attention was also a NuTone. I did not pay attention to the fact that the new fan came with a new trim panel. I decided not to reuse the fixture at all only the duct housing and electric. Despite the fan being slightly smaller it was simple to modify it to fit the old housing. I used picture frame hanging bars attached to the housing to accept the spring catches for the new trim panel. The specs on both fan motors were identical but this new motor is about 1/3 the noise and easily matches the originals performance. I nice quick fix to a noisy eye sore. I would definitely recommend the product.
Was this helpful?
4
0
Exact replacement...but
Quality :
5
Value :
2
It costs more than similar replacement fans, but it has a different impeller and a new grille, and there's where the difficulty is (more on this later). Yes, it was an exact replacement for my Broan 688h fan. It seems quieter and moves more air than the Broan it replaced. IMPORTANT: Check to make sure the height between the top of the impeller and the base plate is the same as your old fan, and ensure the larger diameter impeller will fit into your current duct housing. It installed with a bit of coaxing with a hammer. After it was installed I used duct tape to cover the openings between the duct housing and the ceiling sheet rock on all 4 lower edges. All totaled, it took about 20 minutes to replace. Now the issue - the new clips that hold the supplied grille in place MAY NOT WORK if your ceiling duct is installed deeply into the ceiling, like mine is. the new clips are about 3/8" shorter than the old clips and it makes all the difference in the world. For 30 minutes tried every tool in my tool box to get the second clip in place until I realized that the difference in clip lengths. I installed the old clips onto the new grille and I was finally able to clip it in place.
Was this helpful?
3
0
Easy to install and works great
Quality :
5
Value :
5
Seeds Program Review
(What's this)
The fan was used to replace the original vent fan that came with the house. The new fan is very easy to install. Just pop the metal tab on the old fan so you can drop it out of the ceiling, then when you insert the new fan be sure and hook the two tabs into place as you are putting it in at a slight angle, then just push up on the side with the single tab and it will snap into place. Then just plug it into the power socket and you are done. You only need a flat head screwdriver to do the install. Then install the cover and that's all there is. The fan does the job, and is a great addition to my overall bathroom remodel.
Was this helpful?
5
0
Response from NuToneCustomerSupportMarch 14, 2016
Thank you for taking the time to review your QKN60, QuicKit upgrade kit. We are happy to hear that the installation was simple and easily done! We are sure you will enjoy your fan for many years to come!
Review this Product
Share your thoughts with other customers