The CAMO Edge Deck Fastening System works on any treated lumber, hardwood, cedar, composite or PVC deckboard. CAMO Edge Fasteners, a CAMO Marksman tool, and CAMO Driver Bits combine to deliver a fastener-free deck surface at a price that makes getting the job easy and installing the deck even easier. The CAMO Edge Deck Fastening System is engineered to work exclusively together. Using other branded tools, fasteners or bits will impair performance and won't produce the desired results.
For use with any nominal 5/4 (1 in. x 5-1/4 in. to 5-3/4 in.) solid or grooved deckboards
316 stainless steel, ultimate in corrosion resistance recommended for coastal environments
A reverse rake tip removes deck material as it bores, allowing the screw to penetrate the board without splitting
A star drive offers more points of contact for better performance and reduces bit slippage and wear
An aggressive lower thread pattern provides superior holding power while the reverse upper thread pulls the board tight to the joist and provides a clean, finished entry
A unique trimhead design provides a less visible point of entry
CAMO(TM) offers a Limited Lifetime Warranty that guarantees against rust and corrosion for the life of the project.
Questions & Answers
Typical questions asked about products:
Is the product durable?
Is the product easy to use?
What are the dimensions of the product?
out of 2 reviews
100% recommend this product
Showing 1-2 of 2 reviews
Jul 28, 2017
Occasional breakage of screw head in pre drilled holes ....
Occasional breakage of screw head in pre drilled holes . Driver quality excellent. Performs as advertised.
1 person found this helpful
May 27, 2014
Excellent look and simple application. Proof will be in how it weathers oceanfront conditions over time.
I bought the product primarily because of the supposed marine grade stainless steel. We've had a beachfront house for ten years and the environment is extraordinarily corrosive. The system was simple and neat, the look is very nice.... but how will it handle those conditions over time will determine it's value.
1-7/8 in. 316 Stainless Steel Trimhead Deck Screw (700-Count)
The CAMO Edge Deck Fastening System worksThe CAMO Edge Deck Fastening System works on any treated lumber, hardwood, cedar, composite or PVC deckboard. CAMO Edge Fasteners, a CAMO Marksman tool, and CAMO Driver Bits combine to deliver a fastener-free deck surface at a price that makes getting the job easy and installing the deck even easier. The CAMO Hidden Edge Fastening System is engineered to work exclusively together. Using other branded tools, fasteners or bits will impair performance and won't produce the desired results.See Full Product Description
EdgeXClip Hidden Deck Fasteners (900-Count)
EdgeXClips are up to 88% stronger than leadingEdgeXClips are up to 88% stronger than leading deck board manufacturer's clips in lateral movement tests. For the fastest and easiest installation, secure EdgeXClips with the CAMO DRIVE tool and Clip Guide. The industry-changing DRIVE attaches to your drill, gets you off your knees and is the most affordable stand-up tool on the market.See Full Product Description
ExtremeKD Ipe Clip Black Biscuit Style Hidden Deck Fastener Kit for Hardwoods (1050-Bucket)
EXTREME4 Ipe Clip brand hidden deck fastenersEXTREME4 Ipe Clip brand hidden deck fasteners with a 1/4 in. gap provide installers a flawless, and fastener free deck surface. DIY Home Owners also get a quick/easy installation process. Made for attaching hardwood decking boards, the EXTREME4 offers an edge-mount system making them practically invisible. This unique design offers concealment among deck board gaps, camouflaging the fastener. These hidden deck fasteners are created using a tough, yet pliable polypropylene that further enhances its U.V. ray and chemical resilience. The Clip is factory-made with a black oxide stainless steel insert. The EXTREME4's injection molded insert is what allows it to keep deck boards extra secure for lasting hold-down. The EXTREME4 is tested to be up to 3 times stronger than other hidden fasteners. Deck boards are only secured on one side allowing the natural expansion and contraction of hard-wood decking. EXTREME4's are biscuit style fastener, which allows them to sit within the edge groove of grooved board. 5/32 in. edge grooves can be cut into decking boards by using either a router or biscuit joiner. Buting pre-grooved decking boards is also a suitable choice. To correctly attach a clip, a decking screw is inserted at a 45° angle through the fastener, screwing down into the bottom part of edge slot, and securely into the joist beneath. When repeatedly installing deck boards joined with the EXTREME4, the fastener's essential spacer leg will provide constant and even gap spacing.See Full Product Description
ExtremeS Ipe Clip Black Biscuit Style Hidden Deck Fastener Kit for Hardwoods (525-Bucket)
Not only are EXTREME-S Ipe Clip hidden deckNot only are EXTREME-S Ipe Clip hidden deck fasteners with a 5/32 in. gap quick to install, they also give D.I.Y. home-owners and builders a smooth surface, free of blemishes. The EXTREME-S is an edge-mount fastening system used to attach hardwood deck boards. As a result, these fasteners are virtually invisible after installation. This patented design acts as a camouflaging agent between board gaps. This keeps the fastener out of sight. The fastener is injection molded from a polypropylene plastic. This enhances its UV ray and chemical resistant properties. Designed with a black oxide coated stainless steel insert, the fastener securely attaches boards to joists. This aids with longer lasting hold-down strength. When compared to similar unseen fastening methods, EXTREME-S's have been tested in labs to be up to three times stronger. When installing the EXTREME-S, boards are attached to one side. This allows the natural wood to expand and contract. The EXTREME-S is a biscuit fastener, meaning it will fit into the edge grooves of decking boards. Installers can choose to router the 5/32 in. side groove on site, utilize a biscuit joiner for each clip, or purchase pre-grooved boards. Screws are intended to penetrate the EXTREME-S at a 45° angle through the bottom groove edge of the hardwood plank and down into to the joist. By consecutively installing each deck board along with the EXTREME-S fastener, this provides repetitive gap spacing from the EXTREME-S's primary spacer leg.See Full Product Description