Model # GR001500AJ

Internet #202796136

Campbell Hausfeld 3/8 in. NPT Draincock
0045564204150

Campbell Hausfeld

3/8 in. NPT Draincock

$565 /each

Overview

The 3/8 in. NPT Drain Cock is the perfect product to accompany your air compressor, which will take care of all you draining needs. A drain cock works to its fullest potential when it is positioned at the lowest part of the compressor system, making the draining process as simple as possible.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Installation Options

Product Overview

The 3/8 in. NPT Drain Cock is the perfect product to accompany your air compressor, which will take care of all you draining needs. A drain cock works to its fullest potential when it is positioned at the lowest part of the compressor system, making the draining process as simple as possible.
  • 3/8 in. NPT drain cock
  • Correctly positioned drain cock will make draining your compressor an easy process
  • Durable brass coating
  • 1 year limited warranty

Product Overview

Model #: GR001500AJ
Internet #: 202796136

The 3/8 in. NPT Drain Cock is the perfect product to accompany your air compressor, which will take care of all you draining needs. A drain cock works to its fullest potential when it is positioned at the lowest part of the compressor system, making the draining process as simple as possible.

  • 3/8 in. NPT drain cock
  • Correctly positioned drain cock will make draining your compressor an easy process
  • Durable brass coating
  • 1 year limited warranty

Specifications

Dimensions

Product Depth (in.)
4.75
Product Height (in.)
1
Product Width (in.)
4.75

Details

Accessory Type
Other
Accessory Type
Other
Air Tool Type
Accessory
Maximum Pressure (psi)
90
Product Weight (lb.)
0.1lb
Returnable
90-Day
Tools Product Type
Test Equipment Part/Accessory

Warranty / Certifications

Manufacturer Warranty
1 year limited

Specifications

Dimensions

Product Depth (in.)
4.75
Product Height (in.)
1
Product Width (in.)
4.75

Details

Accessory Type
Other
Accessory Type
Other
Air Tool Type
Accessory
Maximum Pressure (psi)
90
Product Weight (lb.)
0.1lb
Returnable
90-Day
Tools Product Type
Test Equipment Part/Accessory

Warranty / Certifications

Manufacturer Warranty
1 year limited

Questions & Answers

Does this fit Model # wl651800aj(Agmo1) Ser # l6/25/05-7501

Asked by: Bob
Most likely this will fit most compressors. Remove your failed valve to measure it. Or, you can take it to HD to get a person in hardware to help you.
Answered by: steamenginesteve
Date published: 2017-09-28

Does this fit a 125 PSI Campbell Hausfeld Air COmpressor?

I need a replacement for my 125 PSI CH air compressor. Does it fit that? Can I buy this in the store?
Asked by: Mike
Likely yes. But if you are unsure then remove your failed valve to check. Or take it to HD and they will fix you up.
Answered by: steamenginesteve
Date published: 2017-09-28
  • y_2018, m_1, d_22, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_202796136, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/8 in. NPT Draincock is rated 4.9 out of 5 by 10.
Rated 5 out of 5 by from I messed up a little on one of my three air compressors. I did not remember that the winged drain... I messed up a little on one of my three air compressors. I did not remember that the winged draincock is a left-hand thread, so bright me stripped it's wings! Since then I've used pliers which makes it a real pain to drain the pressure tank. This replacement is a is a great, quality product. Campbell Hausfeld is an old Ohio company who makes good value priced, quality air tools and accessories. This draincock would also fit some radiators. It's solid brass in 3/8 in NPT(9.5 mm). Yes, the 3/8 in adaptor has right-handed NPT threads which is pre-coated with pipe-dope. Open the draincock after every use to drain the water to reduce rust inside the pressure tank and leave it open until next use. I warm up my compressors with the drain open which is much more easy on the motor.
Date published: 2017-09-28
Rated 5 out of 5 by from I needed to install a new drain valve on my air compressor and this draincock worked perfectly. I... I needed to install a new drain valve on my air compressor and this draincock worked perfectly. It's a quality part, finish and construction are excellent and it works perfectly. I especially like the fact that the manufacturer pre-applied the teflon tape to the threads on this draincock. It makes for a very simple installation. Just a slight "snug" of the wings shuts this off completely with no leaks. No need to really crank it down. Very satisfied.
Date published: 2017-10-31
Rated 4 out of 5 by from I just got this this the other day and have not had an opportunity to install it into an air syst... I just got this this the other day and have not had an opportunity to install it into an air system yet. However, it has a good finish and the device comes with a Teflon tape seal already included on the threads. This feature makes it easy to add to an air system. The brass fitting is well made and the draincock handle is large enough to operate easily. I'm not sure what the cost is, but I believe it would be an appropriate value.
Date published: 2017-11-07
Rated 5 out of 5 by from I broke the tabs off my other draincock. A quick couple turns with a wrench and I was up and runn... I broke the tabs off my other draincock. A quick couple turns with a wrench and I was up and running. The threads are predoped, which saved me from digging out my jar from somewhere in the garage. The draincock is all brass, so it should last a long time. Now if I could only get my son to remember to turn the plug clockwise to open it instead of counterclockwise, which is how the tabs broke in the firts place.
Date published: 2017-10-30
Rated 5 out of 5 by from High quality part that was very easy to install. The one in my compressor came out very easily mu... High quality part that was very easy to install. The one in my compressor came out very easily much to my surprise as it was broken off when the movers delivered my compressor. As water builds up in the compressor it is important to get it out, this device fits the bill. The nice thing about this valve is that it has the sealant added to the treads already so no need to go looking for the Teflon tape.
Date published: 2017-10-19
Rated 5 out of 5 by from Well built, solid construction. The part comes with the thread seal tape in place. It is ready ... Well built, solid construction. The part comes with the thread seal tape in place. It is ready to install right out of the package. I had to tighten the original drain cock so much to close it, I finally broke it. That won't be a problem with this one. I can open and close this one with my fingers without a problem. It will be much easier to keep the moisture out of the compressor tank now.
Date published: 2017-11-01
Rated 5 out of 5 by from Easy to install and does the job well. Installed this 3/8 IN. NPT Draincock onto my 31 gallon air... Easy to install and does the job well. Installed this 3/8 IN. NPT Draincock onto my 31 gallon air compressor with no problem The 3/8 IN. NPT thread pitch seems to be a universal thread pitch for most North American market made and sold air compressors. Pre-installed thread sealant is also a nice added touch. Actuation of drain function is pretty straight forward in design.
Date published: 2017-11-07
Rated 5 out of 5 by from This Draincock meets all expectations. I needed a replacement for a leaking draincock on the bott... This Draincock meets all expectations. I needed a replacement for a leaking draincock on the bottom of an old compressor that had frozen up and when I tried to pry it open it cracked. This new one screwed right in. It was very nice that it already had the Teflon tape on it so I did not have to get that out as well. Just a wrench snuggly fitting and I was back in business.
Date published: 2017-11-15
  • y_2018, m_1, d_22, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_202796136, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT