Internet #203002163

Model #DH790000AV

HVLP Gravity Feed Spray Gun

  • Designed for efficient operation
  • Cup allows view to paint fluid levels
  • Easy-to-clean paint tool features adjustable controls
  • See More Details
$6210

Frequently Bought Together

+
+
Price:
$6210

Product Overview

Paint more efficiently with this HVLP gravity feed spray gun. It is designed to decrease paint consumption while increasing transfer efficiency. The mesh filter removes dirt particles from paint to prevent any defects. You can view the fluid level on the 600 ml acetal cup on this easy-to-clean paint tool. Constructed to provide optimal atomization, you can control the spray gun's fluid, pattern and air controls.
  • California residents
  • Stainless steel fluid needle and nozzle is compatible with today's advance coatings
  • In-line 80 mesh filter removes dirt particles from paint, preventing defects
  • Includes adjustable fluid, pattern and air controls
  • Includes 1-year limited warranty
  • Click here to learn more about paint sprayers

Compare Similar Spray Guns

Sprayer with 3 oz. Bottle Size 1 (1 mm)
current product
HVLP Gravity Feed Spray Gun
HV5500 Professional Metal Spray GunSG3 Airless Spray Gun
BrandPaascheCampbell HausfeldEarlexGraco
NameSprayer with 3 oz. Bottle Size 1 (1 mm)HVLP Gravity Feed Spray GunHV5500 Professional Metal Spray GunSG3 Airless Spray Gun
Price
$3503
$6210
$10592
$11900
Ratings
(0)
(10)
(8)
(109)
Compatible Paint TypeExterior Paint,Interior Paint,Polyurethane/Lacquer,Primers,Sealers,StainsExterior Paint,Interior Paint,Polyurethane/Lacquer,Polyurethane/Lacquer,Primers,SealersExterior Paint,Interior Paint,Polyurethane/Lacquer,Primers,Sealers,StainsExterior Paint,Interior Paint,Polyurethane/Lacquer,Primers,Sealers,Stains
Paint Sprayers Product TypePneumaticAccessoriesAccessoriesAccessories
Product FeaturesNo Additional FeaturesNo Additional FeaturesLadder HookLadder Hook
View ProductView ProductView ProductView Product

Specifications

Dimensions

Maximum tip size (in.)
.055
Product Depth (in.)
8.25
Product Height (in.)
9
Product Width (in.)
6.75

Details

Accessory Type
Spray Guns
Compatible Paint Type
Exterior Paint,Interior Paint,Polyurethane/Lacquer,Polyurethane/Lacquer,Primers,Sealers
Feed type
Gravity
Included
No Additional Items Included
Kit
No
Maximum operating pressure (psi)
80
Minimum operating pressure (psi)
40
Paint Sprayers Product Type
Accessories
Performance Features
Flow Control,No Additional Features
Product Features
No Additional Features
Product Weight (lb.)
2.59
Returnable
180-Day
Spray Gun Type
HVLP Spray Gun
Spray Tip Pattern Size (in.)
10(in)
Spray Tip Size
1
Trigger Configuration
One Finger Trigger

Warranty / Certifications

Manufacturer Warranty
1 year limited warranty

Questions & Answers

6Questions9Answers

I need a replacement cup for this. what is the part number?

Asked by SS September 2, 2020
1
Answer

The cup for the DH790000AV spray gun is obsolete.

Is an inline water separator/filter needed on the compressor to spray paint with this gun?

Asked by Depfish June 11, 2018
1
Answer

In line Filters/Water Separators are recommended for use when using a paint gun with your compressor.

can I use oil based primer in this gun?

Asked by tbone April 23, 2018
2
Answers

The spray gun will work with light to medium viscosity materials. The unit is designed with a 1.4 mm needle/nozzle.

Can I spray acrylic or oil artist-quality paints with this?

Asked by cm March 13, 2017
1
Answer

This gun is designed to spray all light to medium viscosity materials.

Can I use indoor enamel paint or latex paint with this?

Asked by ang June 17, 2016
2
Answers

Yes, if it is sufficiently thinned. It is not made to shoot thick paint like an airless rig is.

If i purchase this item is it ready to use now or would i need to purchase other items ?

Asked by Toby February 11, 2016
2
Answers

You need an air compressor and paint strainers. Otherwise you are set.

Customer Reviews

  • 10 Customer Reviews
  • 4.2 out of 5 stars overall
89% of customers recommended.
Overall Ratings
5star-icon(5)
4star-icon(3)
3star-icon(1)
2star-icon(1)
1star-icon(0)
Sort By:
The Campbell Hausfeld gravity feed spray gun is a good sprayer for light to medium weight paints....
Quality :
5
Value :
4
Seeds Program Review
(What's this)
The Campbell Hausfeld gravity feed spray gun is a good sprayer for light to medium weight paints. Paints like latex would be too thick to spray unless it is thinned out some.The sprayer has controls for air and fluid. The gun is made out of metal with the paint cup being the only part not being metal. Low overspray, and easy to clean, make this gun handy for those small projects. I like that it doesnt require a very big air compressor to use, suggesting an air compressor thats rated at 3.2 CFM @ 40 PSI for the minimum requirement to be able to use this sprayer. Sprayer comes with a 1 year warranty, and includes a metal holder that you can use to store the sprayer when not in use or while in use which can come in handy. Overall, I really like this sprayer. One person said that the top is hard to take off, but I find that if you take off the black center plug first, then when you try to remove the paint cup lid, it will relieve the vacuum as you lift the lid and that makes it easier to take off. Sure, it may be better if the lid screwed on, but as it is, if the lid top comes off too easily, then you may wind up with it leaking paint if you hold the gun at certain angles, which is no good either.
Was this helpful?
1
0
I received my Campbell Hausfeld HVLP sprayer today, it is easy to assemble. After reading the di...
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I received my Campbell Hausfeld HVLP sprayer today, it is easy to assemble. After reading the directions I don’t believe you could spray latex paint unless you thinned it. I have some wood patio chairs that need paint, but I will use my larger sprayer on them because I don’t want to thin the latex paint, so I decided to use the rest of my waterproofing material on my cedar fence. After straining the waterproofing material, it worked well. The adjustable fan direction was nice, and I liked the air adjustment control to keep it from running. I still used cardboard for the overspray. This is a very fast way to paint and is easy to clean up the spray gun also.
Was this helpful?
1
0
I have mixed feelings on this spray gun, it sprays paint very well and puts down a nice even, smo...
Quality :
3
Value :
2
Seeds Program Review
(What's this)
I have mixed feelings on this spray gun, it sprays paint very well and puts down a nice even, smooth coat of paint, without a lot of extra over-spray. However the lid is so poorly designed it just makes it a pain to use. The lid is just pushed into the top of the reservoir and has no good provisions for removing it, sometimes you can get it off by just pushing very hard with your thumbs and wiggling it but most of the time you have to jam a screwdriver under the lip and pry it off, and usually end up spilling paint if there is any left the reservoir. It comes with a nice little holder for holding the paint gun while you are filling it. It does not have any air fittings included. It has a filter that comes with it that goes under the reservoir, it would have been nice if the instructions had mentioned the filter and what to do with it, I had to look at the part breakdown to figure out where it goes. The instructions are good as to how to adjust the paint spray pattern and air pressure but say nothing about whether to leave the vent on the top open or closed while spraying. Final thoughts I really liked the gun, but hated the lid, instructions were so-so, and without the crummy lid it probably would have gotten 5 stars.
Was this helpful?
3
0
How do you compare this one with the DH7800 - Is the DH7900 better? I understood earlier that the...
How do you compare this one with the DH7800 - Is the DH7900 better? I understood earlier that the DH7900 could not be adjusted, but in this photo I see two adjustable screws
Was this helpful?
0
0
Before ordering this gun I read as much about the...
Before ordering this gun I read as much about the gun as possible and from what I read it was supposed to spray Latex paint. It will do so after you thin it to water consistency. I didn't feel like I would have any benefit to the latex paint I wanted to use and after painting one railing I decided to paint the rest by hand.So, I returned the gun for credit.
Was this helpful?
0
0
Welcome to the world of HVLP. Now with less overspray it is possible to get a decent paint job. T...
Quality :
5
Value :
5
Seeds Program Review
(What's this)
Welcome to the world of HVLP. Now with less overspray it is possible to get a decent paint job. The gun offers numerous adjustments and with a gravity cup balances well. There all the normal adjustment knobs needed to adjust the spray pattern and these knobs move smoothly for fine adjusting. The HVLP feature means lower air pressure and is more forgiving for a non professional painter or pro. I do like the gravity feed cup much more than a siphon feed. It seems to be easier to clean also.
Was this helpful?
0
0
I don't do a lot of painting, but thought I'd try one of these gravity feed type sprayers. These ...
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I don't do a lot of painting, but thought I'd try one of these gravity feed type sprayers. These are clear instructions included and it's very simple to use. It sprays a fine mist, if needed and the low overspray cuts down on wasted paint and time. You can fine tune the spray and pattern to suit your project and it's very predictable. The cleanup was easier than expected. These are not crazy expensive like some, but offer great control and finish to your projects.
Was this helpful?
0
0
I have used several types of spray guns in the past doing from small to large projects with this ...
Quality :
5
Value :
5
Seeds Program Review
(What's this)
I have used several types of spray guns in the past doing from small to large projects with this campbell hausfeld DH7900 I sprayed A corner shelf that I ha done some repair work on it came out beautiful excellent automization very little overspray I would highly recommend this to any one that has painting needs including automotive touch up or complete
Was this helpful?
0
0
This is a great spray gun for smaller jobs. I have an airless rig but it takes a lot of setup and...
Quality :
5
Value :
5
Seeds Program Review
(What's this)
This is a great spray gun for smaller jobs. I have an airless rig but it takes a lot of setup and paint just to start painting. This gravity fed sprayer eliminates much of the waste and gets you started painting sooner. It does require the paint to be fairly thin so latex will require some thinning. I have not had any luck spraying latex right out of the can. Also, be sure you strain the paint before pouring it in the cup. Cleanup is simple and paint waste is minimal.
Was this helpful?
0
0
This is a good spray gun for the price. I would caution anyone looking for a gun to spray interi...
Quality :
4
Value :
5
Seeds Program Review
(What's this)
This is a good spray gun for the price. I would caution anyone looking for a gun to spray interior latex paints, this is really more for materials that can be thineed and sprayed. I used this to spray some garden furniture with enamel. I thinned the paint as per the manufacturers instructions, but also strained it when adding it to the cup. This is an impartant step as the tip clogging is likely if not strained and is not an issue with the gun. The controsl required some tweeking to get the pattern I wanted with reduced overspray. Not much different than other guns. After some testing I was able to lay down a realtively smooth finsih that was nore than acceptable for my needs. If you are looking for a mirrir finsih this gun will get you close but not there. Also at thsi proce point that is not to be expected. clean up was easy and no harder than any other gun I have used. The weight was good and the cup was easy to clean. this is a great gun for most projects, as mentioned the material you are looking to spray is key to its success. I was able to run this gun with a 25 gallon compressor succesfully, you should not expect to use a small compressor for HVLP gun, so keep that in mind as well.
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers