The Capri Tools Ultra Precision Certified Torque Limiting Screwdriver lets you work on electronics, computer equipment, and delicate instruments with ease and confidence. Our torque setting ranges from 1.5 to 6 in. lbs. with ultra-precise 0.05 in. lb. increments. Intuitive single hand torque adjustment mechanism with easy to read torque scale lets you quickly adjust torque settings on the fly. We engineered the power and precision into a form factor that's up to 50% smaller than comparable torque screwdrivers. It is just 4.1 in. long and 1 in. wide, and provides excellent ergonomics and maneuverability especially in tight spots. +/- 6% accuracy and it is certified in accordance with ASME B107.300-2010 and ISO 6789-1.2017. A Certificate of Conformance with individualized traceable serial number is included. 1/4 in. universal hex bit holder and comes with 16 screwdriver bits: Slotted: 4 mm, 6 mm, Phillips: PH0, PH1, PH2, PH3, Star: T10, T15, T20, T25, T30, T40, Hex: 3 mm, 4 mm, 5 mm, 6 mm. A premium custom carry case is included.
Ultra-precise torque limiting screwdriver lets you work on electronics, computer equipment and delicate instruments with ease and confidence
Torque range from 1.5 to 6 in. lbs., in 0.05 in. lb. increments; intuitive single hand torque adjustment lets you quickly adjust torque settings on the fly
Just 4.1 in. L and 1 in. W up to 50% smaller form factor than comparable torque screwdrivers
Enjoy the excellent hand feel and ultimate maneuverability especially in tight spots
Plus/minus 6% accuracy, certified in accordance with ASME B107.300-2010 and ISO 6789-1.2017; a certificate of conformance with individualized traceable serial number is included
1/4 in. universal hex bit holder, comes with 16 screwdriver bits: slotted: 4 mm, 6 mm, Phillips: PH0, PH1, PH2, PH3, Star: T10, T15, T20, T25, T30, T40, hex: 3 mm, 4 mm, 5 mm, 6 mm
This is a terrific little tool (model 20175S) for those needing excellent torque control on small...
This is a terrific little tool (model 20175S) for those needing excellent torque control on small assemblies. Torque is infinitely adjustable between 0.5 and 6 in-lbs with markings every 0.05 in-lbs on the smooth rotating dial. Markings are etched into the tool, with white-on-blue and white-on-black color schemes for excellent readability. The 20 included driver bits use the standard locking ¼” hex fitting so additional or replacement bits can be found easily. The tool is a joy to use – very comfortable to hold with knurled rings for torque adjustment and the locking mechanism. Its all-metal construction gives it nice heft without bulk, and it just oozes quality construction. The unit and bits come in a solid plastic storage case, and if I made one improvement it would be to the way the bit holders sit in the case. The two holders, each storing 10 bits, pop into and out of the case, rather than rotating around an axle rod inside the case, and the fit is tight. It's a very small nuisance though. The unit comes with a calibration certificate, and the manual states the calibration is good for 5000 clicks of the torque mechanism or 1 year, whichever comes sooner. Unfortunately, my certificate is dated August of 2017; since I just got the tool in May of 2018 I only have 3 months of “certified” calibration. The price of the unit is very competitive with other high-quality units in this torque range, especially given the infinite adjustability (cheaper units may adjust in 0.5 in-lb steps). A wonderful tool.
A very good torque screwdriver. All metal construction. Perfect for precision hobby work. I gav...
A very good torque screwdriver. All metal construction. Perfect for precision hobby work. I gave it to a friend who uses it for his high end helicopters and drones. Calbirated in accordance with ASME B107.300 & ISO 6789 standards. Accurate to within +_ 6% CW
The bits are high quality so slipping isn't really an issue. The bits fit in the shaft really snug. There is a small ball bearing holding them in. Be sure to push the bit in past this bearing for a really snug fit. Not so tight you can't pull them out easily. Any standard 1/4" hex bit will fit. for my small short bits I need a pliers to pull them out.
comes with a nice carrying case. the user guide has a simple reference chart and conversion chart between all the standard units.
The scale is easy to read and easy to use. A simple twist of the collar locks and unlocks the setting.
Certified 10 to 50 in. lbs. Torque Screwdriver Set
This 10-50 in. lbs. torque limiting torqueThis 10-50 in. lbs. torque limiting torque screwdriver comes with a 1/4 in. female hex drive and a super comfortable grip. The torque adjustment is in 1 in. lb. increments to achieve maximum precision. An internationally recognized calibration certificate is included, which validates this product as having a calibration tolerance of +/-6% and meeting DIN ISO 6789 and ASME B107.300-2010. The torque adjustment is intuitive and automatically locks after each setting is selected. The torque limiting feature causes the screwdriver to slip once selected torque is reached in order to avoid damage to the screw being driven.See Full Product Description