Model # UA9AEB-CTN

Internet #202304074

Store SKU #703459

Carlon 3/4 in. 90° Sch. 40 Elbow
0034481227014

Carlon

3/4 in. 90° Sch. 40 Elbow

  • Constructed of corrosion-resistant materials for durability
  • Large enough to accommodate electrical wires
  • ETL listed and NEC rated for safety
$086 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Constructed of corrosion-resistant materials for durability
  • Large enough to accommodate electrical wires
  • ETL listed and NEC rated for safety
This 3/4 in. 90° Sch. 40 Elbow enables a turn in a run of rigid non-metallic conduit (RNC) and won't kink the end of electrical wires. Cementing it in place is fast thanks to its belled end. Made of rigid non-metallic PVC.
  • Provides a slick bend to allow electrical wires to run through without kinking
  • Made of Sch. 40 PVC
  • Corrosion resistant
  • Belled end joins easily to PVC Sch. 40 or 80 RNC pipe
  • Maximum temperature of up to 75°F
  • ETL listed and NEC rated
  • 3/4 in. x 90° radius elbow with a belled end to quickly cement to PVC Sch. 40 or 80 RNC pipe
  • Rigid non metallic Sch. 40 PVC 3/4 in. elbow provides a slick bend to allow electrical wires to flow through without kinking ends
  • Non metallic UL and ETL approved
  • Note: product may vary by store

Product Overview

  • Constructed of corrosion-resistant materials for durability
  • Large enough to accommodate electrical wires
  • ETL listed and NEC rated for safety
Model #: UA9AEB-CTN
Sku #: 703459
Internet #: 202304074

This 3/4 in. 90° Sch. 40 Elbow enables a turn in a run of rigid non-metallic conduit (RNC) and won't kink the end of electrical wires. Cementing it in place is fast thanks to its belled end. Made of rigid non-metallic PVC.

  • Provides a slick bend to allow electrical wires to run through without kinking
  • Made of Sch. 40 PVC
  • Corrosion resistant
  • Belled end joins easily to PVC Sch. 40 or 80 RNC pipe
  • Maximum temperature of up to 75°F
  • ETL listed and NEC rated
  • 3/4 in. x 90° radius elbow with a belled end to quickly cement to PVC Sch. 40 or 80 RNC pipe
  • Rigid non metallic Sch. 40 PVC 3/4 in. elbow provides a slick bend to allow electrical wires to flow through without kinking ends
  • Non metallic UL and ETL approved
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$0.82 /each
$0.86 /each
$1.22 /each
$1.27 /each
Name 3/4 in. 45 Belled Standard Radius Elbow 3/4 in. 90° Sch. 40 Elbow 1 in. 45° Bell Standard-Radius Elbow 1 in. 90 Sch. 40 Elbow with Bell End
Brand Carlon Carlon Carlon Carlon
Ratings (0) (1) (1) (3)
Application type Non-metallic Non-metallic Non-metallic Non-metallic
Fitting type Elbow Elbow Elbow Elbow
Trade Size (in.) 3/4 3/4 1 1
Material PVC PVC PVC PVC
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
9.45
Product Height (in.)
1.3
Product Width (in.)
3.45
Trade Size (in.)
3/4

Details

Application type
Non-metallic
Belled end
Yes
Bend (Degrees)
90
Bend Radius
0.0 in
Compatible conduit type
RNC
Electrical Product Type
Elbow
Fitting type
Elbow
Material
PVC
Package Quantity
25
Paintable/Stainable
No
Product Weight (lb.)
.21lb

Warranty / Certifications

Certifications and Listings
ETL Listed
Manufacturer Warranty
No

Specifications

Dimensions

Product Depth (in.)
9.45
Product Height (in.)
1.3
Product Width (in.)
3.45
Trade Size (in.)
3/4

Details

Application type
Non-metallic
Belled end
Yes
Bend (Degrees)
90
Bend Radius
0.0 in
Compatible conduit type
RNC
Electrical Product Type
Elbow
Fitting type
Elbow
Material
PVC
Package Quantity
25
Paintable/Stainable
No
Product Weight (lb.)
.21lb

Warranty / Certifications

Certifications and Listings
ETL Listed
Manufacturer Warranty
No

Questions & Answers

what is the 90 degree measurement?

what is the 90 degree measurement?
Asked by: farmboy
The radius for this elbow is standard radius of 4.5 inches.
Answered by: BrandAnswers
Date published: 2017-09-11

Its says maximum temperature is 75 degrees? So it will melt in the summer? Seems odd...

Its says maximum temperature is 75 degrees? So it will melt in the summer? Seems odd...
Asked by: Wincal
Thank you for your question. The bullet point needs revised thank you for bringing it to our attention. The full statement on temperature ratings is as follows, unless marked for higher temperature, rigid nonmetallic PVC conduit is intended for use with wire rated 75°C or less including where it is encased in concrete within buildings and where ambient temperature is 50°C or less. Where encased in concrete in trenches outside of buildings it is suitable for use with wires rated 90°C or less.
Answered by: BrandAnswers
Date published: 2017-07-31

Please specify an axis bending radius with a plus or minus tolerance? Otherwise inside bending radius /- tolerance is acceptable foe answer.

Asked by: Sunny
Thank you for your question. The minimum bend radius for the UA9AEB-CTN is 4-1/2". there is no +/- tolerance given.
Answered by: BrandAnswers
Date published: 2017-08-18

Is there a Female flange on one end

Regarding: Model UA9AEB-CTN Internet #202304074 Store SKU #703459 3/4 in. 90 Degree Sch. 40 Elbow: I cannot tell by looking at the Home Depot website photo if there is a female flange at one end. I looked up the manufacturer part number that Home Depot has listed for it, then went to other websites to look at the photos they had. In all those websites that I looked-up it very obviously did have a female flange on one end. Do 3/4 inch 90° schedule 40 electrical conduit elbows (Model UA9AEB-CTN Internet #202304074 Store SKU #703459) that Home Depot has at the Ukiah California Home Depot store have the female flange on one end?
Asked by: SMHRV3
This is a belled elbow - one end is smooth belled end and the other is smooth plain end. Neither end is threaded.
Answered by: BrandAnswers
Date published: 2017-06-24
  • y_2017, m_11, d_24, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202304074, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 97ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 in. 90° Sch. 40 Elbow is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Easy to use Easy To use Very basic had no problems using this product.
Date published: 2014-05-06
  • y_2017, m_11, d_24, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_, sid_202304074, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms
  • REVIEWS, PRODUCT