30 in. W White Corner Wood Closet System

If you are measuring straight across at an angle, from left end to right end, and not letting the tape measure touch any part of the shelf, the measurement is 22 inches even. The measurement of 30 inches refers to the distance from the sheetrock to the end of the shelf on the right, and from the sheetrock on the other wall, to the other vertical panel, on the left. The distance from the interior corner to the end of the shelf as it faces you, the center of the curve, is 19".

I don’t know who the “product expert is” who answered this previously but they should know that in the “Use and Care manual” under Product Details / specifications, it states it can hold 25 lbs per shelf.

You can also cut a corner off the rear of the shelf, and feed the part that plugs into the printer up through this corner cut, since the end of the cord that fits into the printer is smaller than the plug that goes into the wall outlet. Note that the printer can't weigh more than 25 pounds as max weight per shelf is 25#. We put blue painter's tape on the corner where we were cutting so the laminate would cut cleanly and used a finer blade on the table saw.

if you purchased the kit then it should have the brackets please reach out to customer service at customers@thestowcompany.com with order info . if you purchased the parts to assemble separate then they don't come in the individual parts and can be purchased at homedepot.com https://www.homedepot.com/p/Closet-Evolution-48-in-W-Steel-Wall-Mount-Rail-A6/311095317

The shelves are 14 inches deep at each end. In the center of the shelf, where it's curving around that interior corner, the depth of that 90 degree angle, from the corner to the front curve of the shelf, is 19 inches. I have this unit installed, and the interior space there is perfect for out-of-season clothing.

there are no spiral or curved clothing rods for this system/ line. you can choose to use a product out side the closet line but it will void the warranty by doing so.

some of the shelves are adjustable and can be removed. there are not curved rods in the line so please note any outside added materials not in the closet line will void warranty.

The vertical panels are 72 inches tall (6 feet) and 14 inches deep, front to back. On one of our closets, we cut down the vertical a few inches in order to fit a cedar chest on casters underneath.

they are a different thickness. the corner unit is 5/8th thick while the serenity closets are 3/4th inch thick

If you're asking how many shelves, there are six shelves total. Additional ones are not available for purchase to my knowledge.