Style+ 25 in. W White Hanging Wood Closet Tower

The ClosetMaid Style+ 14.59 in. D x 25.12 in. W x 56.48 in. H Chocolate Wood Closet System Hanging Tower is a dream product. I only had one issue which was totally my fault. I should have read the instructions more carefully before I alone tried to stand up the system after putting it together. The directions clearly say "using team lift" meaning to have two people lift it, not just one person. The installation instructions were perfect. This hanging tower kit comes with all the hardware. At first, the assembled shelf system seems unstable but once you hang it and anchor it properly to the wall, the shelf becomes very sturdy.

Unique unconventional design as I am accustomed to hanging kitchen cabinets or garage cabinets that you screw into the wall/studs in several locations. Building this shelf was very frustrating. The directions are poor at best even though I am accustomed to building furniture. I spent way too much time trying to deal with the lack of labeling and precise instructions. There are references to panels by letters like A, B, C etc. but nothing was labelled. The L brackets did not have pre drilled holes for proper placement and there were no indications that you needed to create your own hole in the cabinet. This tower relies on a single large metal brace to support the weight of the structure and 4 small L brackets for added structural stability. I regularly use this type of metal brace for heavy mirrors and found then to be rock solid and my preferred method of hanging heavy items when attached to wall studs. It has a stated load capacity of 200 lbs which is adequate for any closet as we tend to store clothes, pillows or other items that are not super heavy. I am struggling to think of a reason why I would install a hanging shelf in my closet. The description is to allow the area under the unit accessible. I feel like this is a solution looking for a problem to solve. If you look at the picture on the packaging you see this shelving structure is several feet above a couple pair of shoes. If the cabinet extended to the floor you could still put your shoes there and even place a shelf right above it for more shoes. I do not doubt somebody might need something like this and this might be the perfect solution for them andI I hope it serves them well. I guess if you have longer items like Skis it might make sense but you could also just stand the long items up rather than lay them along the floor. We have decided to use it in the garage. Unfortunately we have a bunch of cr#% (stuff) that we need to clear before I can successfully deploy. We like ClosetMaid products but this was a negative experience. We have 3 large closets and all of them have ClosetMaid organizers in them. We are accustomed to the units that sit on the floor and are anchored to the wall with L brackets.

The Closet Maid Noir Wood Hanging Closet System is a great addition to the already diverse Closet Maid collection. The Noir color is dark, rich and definitely stylish. This system allows you the ability to add a personal touch anywhere you decide to use it due to the the various sizes and shelving options which provide a wide variety of configurations. We definitely decided to use this system in an unconventional way. Thinking outside of the box, we decided to use these hanging shelving units in our media room. We are creating a custom entertainment / shelving console that will flank either side of the TV. We are also going to use it in the other corners of the room to display a wide variety items from sports memorabilia to my daughters intricate LEGO masterpieces. The shelving units are extremely easy to put together and can be completed in no time at all by one person. However, they are pretty heavy and I would strongly recommend getting someone to help lift them and get them in place. A definite plus is the fact that Closet Maid provides the proper hardware to hang the shelving units with complete piece of mind. There are only two things that I wish were different. The pewter / gold colored bar that is used to mount the shelving unit to the wall stands out against the dark noir color. It would definitely look better and not stand out if it was a dark matte black. It wouldn’t be an issue in a closet, where your clothes would typically hide it, however when you want to use it in an unconventional way the little details count. The final change that I think would add that finishing touch would be some sort of insert to fill in the void between the mountain bracket and shelving system. With those two small suggestions aside, this is a quality product that I well worth the investment no matter where you decide to use it.

This beautiful bleached walnut ClosetMaid Hanging Tower stands 56.5 inches tall and is 25 inches wide with 15.5 inch deep shelves, plenty of shelf space to make a huge difference for storage. I followed the instructions and the unit was put together in about an hour. The shelves are adjustable. I especially like this shelving unit because of the solid shelf surface as opposed to wire shelves.

Got the product in two boxes. Shelf unit and the clothes hanger rods. There was enough to make a shelf with the center cabinet and three rods (one on one side and two on the other side. It did not include top shelf board over the rods. The shelf module was very easy to assemble with provided tools and a #2 Phillips screw driver. It had twist lock fasteners to assemble the two sides and the bottom and top. The unit is a hanging unit . The shelf module actually hangs on the wall as opposed to siting on the floor. Documents say it will hold up to 500 lbs. The hanger bracket is bent metal piece with holes for screws and a 45 degree bend along the length of the bracket that slides into the sides of the box. It looked like this could slide off in a quake so I used an "L" bracket (provided for a different purpose) to screw into one of the holes at each end of the bracket to then attach to cabinet walls so it would not move horizontally and fall off the bracket. A 23 3/4" 1x1 board could be placed inside the top of top open shelf. It could be screwed to the studs provided they leave room for coat hangers.. Clothes rod brackets are pairs that slide apart to touch the side of the shelf cabinet and the wall to the Left or right and are held in place by two screws each. The rod has a notch at the bracket ends to keep the rod from sliding together. I installed a 1/2 x 4 board on the wall to accept the wall bracket. If you can hit a stud that works too. Nice finish in black. Only problem was the bracket was just long enough to meet the outside of each side of the shelf cabinet. Will fit across two studs but not 3. This leaves one side to have a significant space from the screw to the outside edge of the cabinet wall. When the weight of the cabinet encounter the larger space edge it was able to slide further down into the bracket. One end did not and the other did slide down, so it was slightly out of level. Should still work as is, but making it level might put less strain on one side than the other side. Daughter was happy with the unit.

I really thought my closet was bigger than it really is. I got two for this closet but only one would do. I really love the results, so love things organized and has it's own place. I needed to fit two kids in this closet but what can I say, to small. I did put the bottom shelf on wrong and had to pay for it. But it worked out in the end, I love the results.

Solid closet hanging tower Was using the flexible tower and had problems of items falling of the rack. Replaced it with this solid tower and now I got nice storage for small items like socks and underwear in my kids room closet. This is really easy to assemble. But since it is heavy, need at least two people to hang it on on the wall. This gives very clean look and shelves are highly adjustable which makes easy to customize for individual needs.

I'm not disorganized, I'm just well-mixed. All my cordless tool batteries are on a table in a corner of my bedroom. You can't let them get too hot or too cold, my shop and garage are not climate controlled so I keep them in a corner on a little table. In a perfect world all tools would use the same batteries but over time I have accumulated 5,6,or 7 different brands. When I saw this hanging shelf system I knew it would be the perfect solution to getting these chargers organized. Unpacking was simple and there are not too many parts. All the hardware is gathered in one bag. and there are 7 panels that make up the entire assembly. Reading the instructions you see it is just a matter of making a box, hanging it on a wall, then putting shelves in it. The box is hung by what I would call a French cleat. I was able to mount it on two studs with the screws provided. I may at some point replace them with SPAX lag screws. The instructions weren't clear explaining whether you needed to also use the toggle bolts if you were able to attach the cleat to two studs. I wanted to avoid drilling more holes in my walls so skipped the toggles and I'm relying on the studs. Putting this together and hanging it was easy. Took about an hour and a half. The hardest part was lifting the box up and hanging it on the cleat by myself. The chargers look good on the shelves. There's space for every category of battery. I've included pictures, but please note this is a work in progress. I'll be making holes for the electric cords and putting hardware called desk grommets in the holes. They're plastic liners so your holes look finished. You could even hang a curtain over the front of this to keep dust out. So as a person who struggles with organization this device is a great help to me.And I think that's what it's for. Maybe you have a collection or accumulation that could be organized on this device utilizing some empty wall space.

This is a great product from ClosetMaid. It is a wide closet system hanging tower. It is over 56 inches wide. It is a beautiful bleached walnut color, like a white wash. It is very easy to assemble. The instructions are very clear. Because this is very versatile, I decided to use this as a bookcase, in my extra bedroom and I love it. We did attach it to the wall so it would be very sturdy.

Used the Closet Maid system and converted my small walk-in closet to an organizer's dream! I've been living with the old-style long rods with wood shelves above in my little walk in and was more than ready to get a system to help me navigate and organize my clothes. The Style+ units in bleached walnut are prettier than plan white but are light enough not to overwhelm the space. The demo and prep for the units was where I spent the bulk of the work on this project. Once that was done, the units went together easily, and mounting was well explained in the instructions. While I still have shelves to install, the units are now on the walls and the clothing rods are installed. Looks great and I'm excited to put a few items in the closet. Really happy with the result!