Internet #204771185

Model #2687

1/4 in. x 2 ft. x 2 ft. PureBond Cherry Plywood Project Panel (Free Custom Cut Available)

  • Free custom cut available - See details below
  • PureBond uses formaldehyde-free, soy-based assembly technology
  • Cost-competitive decorative hardwood plywood
  • See More Details
$997

Frequently Bought Together

+
+
Price:
$997

Product Overview

Custom Cut Your Order for Free Here
Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

The decorative veneers on this 1/4 in. x 2 ft. x 2 ft. PureBond Cherry Plywood Project Panel are plain-sliced from domestically harvested cherry trees, exhibiting the uniqueness and warmth of natural timber with hardwood grains running along the length of each panel for stunning visual allure. Precision-cut with finely honed edges, these petite panels are perfect for smaller cabinetry and woodworking projects or putting the finishing touches on larger furniture-building jobs. The soy-based PureBond technology is strong and water-resistant, able to tolerate moisture and humidity better than plywood assembled with formaldehyde-based solutions. Additionally, the 3-ply panel is cost-competitive with UF-constructed plywood and will not expose indoor environs to toxic fumes, further preserving interior spaces and promoting healthy living and working conditions. Expand your DIY exploits with this cherry hardwood plywood to create a myriad of exquisite carpentry pieces, including footstools, benches, cabinets, shelves, end tables, pet food centers, serving trays and more.
  • California residents
  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Note: The form is not available on mobile devices.
  • 3-ply project panel is assembled with smooth, patch-free cherry veneer applied to only the face side of this panel; the back of the panel is not intended to be exposed
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top veneer, measuring approximately 1/50" thick, exhibits the beauty and timeless quality of natural hardwood and is suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/4 in. x 2 ft. x 2 ft.; Actual: 0.203 in. x 24 in. x 24 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 3 lbs.
  • Grade: B-4 - See Grading Guide for additional information
  • Available in additional species- Alder, Cedar, Hickory, Mahogany, Maple, Poplar, Red Oak, Walnut, and White Oak

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Project Panels

1/4 in. x 2 ft. x 2 ft. PureBond White Oak Plywood Project Panel (Free Custom Cut Available)
current product
1/4 in. x 2 ft. x 2 ft. PureBond Cherry Plywood Project Panel (Free Custom Cut Available)
1/4 in. x 2 ft. x 2 ft. Rough Sawn Birch Plywood Project Panel1/4 in. x 2 ft. x 2 ft. 2-Sided PureBond Cherry Plywood Project Panel
BrandColumbia Forest ProductsColumbia Forest ProductsColumbia Forest ProductsColumbia Forest Products
Name1/4 in. x 2 ft. x 2 ft. PureBond White Oak Plywood Project Panel (Free Custom Cut Available)1/4 in. x 2 ft. x 2 ft. PureBond Cherry Plywood Project Panel (Free Custom Cut Available)1/4 in. x 2 ft. x 2 ft. Rough Sawn Birch Plywood Project Panel1/4 in. x 2 ft. x 2 ft. 2-Sided PureBond Cherry Plywood Project Panel
Price
$700
$997
$1069
$1399
Ratings
(134)
(235)
(44)
(8)
Nominal Product Thickness (in.)1/41/41/41/4
Nominal Product Width (ft.)2222
Nominal Product Length (ft.)2222
Plywood FeaturesStainableStainableStainableStainable
Weather ExposureInteriorInteriorInteriorInterior
Engineered Wood TypeHardwood PlywoodHardwood PlywoodHardwood PlywoodHardwood Plywood
View ProductView ProductView ProductView Product

Specifications

Dimensions

Actual Product Length (in.)
24.000
Actual Product Thickness (in.)
.203
Actual Product Width (in.)
24
Nominal Product Length (ft.)
2
Nominal Product Thickness (in.)
1/4
Nominal Product Width (ft.)
2

Details

Engineered Wood Type
Hardwood Plywood
Plywood Features
Stainable
Returnable
180-Day
Shape
Square
Span Rating
Not Applicable
Weather Exposure
Interior

Warranty / Certifications

Manufacturer Warranty
Product warranted against glue or bond failure. Product replacement provided.

Questions & Answers

45Questions25Answers

Are all the layers cherry or what is the thickness of the cherry itself?

Asked by pinewoods October 5, 2020
1
Answer

The actual final thickness after drying and sanding is approximately .703". Only the outer layers of this product are cherry.

Is this product pre-finished?

Asked by TC September 12, 2020
2
Answers

No...but it’s ready to finish with a slight sanding.

how to order custom cut

Asked by pete May 2, 2020
1
Answer

There is a link at the bottom of the product page that says "Custom cut your order here for free". That link will take you to a form that, once submitted, sends your cut request over to our mill. Then you complete the order for the product one Home Depot's website like normal. Any questions, let me know, mhale@cfpwood.com -- Michael

For a ceiling project would the 1/4" product be preferred due to less weight, or would warping be...

Asked by Lane March 1, 2020
2
Answers

It all depends. I would definitely work in 8' panels, and the 1/4" would be lighter. If you had adequate support, you could use 1/2" or 1/4". The thinner panels won't tend to warp if supported well, however, if supported well, you could use the 1/2" panels. 1/2" are more money.

Can you custom cut this into a 2' circle?

Asked by Admiral February 29, 2020
1
Answer

Yes, can be done. Tape the area to be cut with 3M blue painters tape, this will help eliminate the cut edges from getting a rough edge. You will need to band the edge with cherry trim after. I used a heat gun to get the glue to adhere.

is this cherry on both sides ?

Asked by sherrie January 9, 2020
2
Answers

Yes, its veneered on both sides.

What is the weight of a 1/4"x2'x4' Panel

Asked by Devon August 9, 2019
2
Answers

Maybe a pound in weight. no it would not freestand alone or support and sort of weight or force. They would snap.

How to specify custom cuts with online order?

Asked by Neil July 24, 2018
5
Answers

We ordered more than we needed and did the custom cutting ourselves.

is this a bendable plywood?

Asked by mme March 6, 2018
5
Answers

No. You might get some play over the 4' length but that's it. In response to a similar question some time ago, I said that I had tried cutting through one ply on the back with a table saw and that still didn't allow bending.

Any problems using 3/4” plywood for dining table top with a decorative routered edge? Can edge be stained enough to hide or blend exposed layers?

Asked by TD January 8, 2018
4
Answers

No amount of stain or finish will hide the fact that the edge is plywood. I suppose you could paint it, but you'd still have a difference in the texture (the plywood layers are coarser wood, and would not be as smooth as the surface veneer. If you want a decorative edge detail (instead of using edge banding), then my suggestion is to do the edge detail on solid wood, and affix that solid wood to the edge of the plywood veneer with tongue/groove or similar typical method for attaching solid edge to plywood.

1/4 in. x 2 ft. x 2 ft. PureBond Cherry Plywood Project Panel (Free Custom Cut Available) - page 2

Customer Reviews

  • 235 Customer Reviews
  • 4.6 out of 5 stars overall
92% of customers recommended.
Overall Ratings
5star-icon(169)
4star-icon(38)
3star-icon(13)
2star-icon(10)
1star-icon(5)
Sort By:
Quick shipment
Well packaged, arrived quickly. Flawless faces. Plywood sides nicely match cherry drawer faces. Great deal.
Was this helpful?
0
0
I bought a new, larger TV and the media stand I have wasn't wide enough. It was either purchase a...
I bought a new, larger TV and the media stand I have wasn't wide enough. It was either purchase a new, wider media stand or get creative. I decided if I could just buy a board wide enough for the new TV and screw it to the old media stand, that would do the job. Save money and use the stand that I have. The size I wanted was not a standard size, so being able to have a free custom cut was tremendously helpful. I ordered it to the size I wanted, screwed it to the stand and now the new TV fits.
Was this helpful?
0
0
Matched the cherry wood perfectly.
Matched the cherry wood perfectly.
Was this helpful?
1
0
Loved the ease of being able to order custom cuts of wood for pickup at the store in a neat and t...
Loved the ease of being able to order custom cuts of wood for pickup at the store in a neat and tidy easy to carry package. The wood was excellent quality. I use it for cutting and engraving on my Glowforge laser.
Was this helpful?
0
0
Very smooth, nice pieces of wood. The free cutting service is the best. Quick delivery. Have alre...
Very smooth, nice pieces of wood. The free cutting service is the best. Quick delivery. Have already purchased again and will do so again and again.
Was this helpful?
0
0
Good product, vainer thin but very even and well matched.. Worked well for sides of cabinet I made.
Good product, vainer thin but very even and well matched.. Worked well for sides of cabinet I made.
Was this helpful?
0
0
I used the FREE cut to size option and was not disappointed. The cuts and finish were better tha...
I used the FREE cut to size option and was not disappointed. The cuts and finish were better than expected, and better than I could do myself. The included FREE shipping did not hurt either!
Was this helpful?
2
0
I just love this! I use it to laser etch photos. I will always buy this. Though i wish it coul...
I just love this! I use it to laser etch photos. I will always buy this. Though i wish it could be shipped to the store.
Was this helpful?
1
0
Worked great for building a credenza. No splitting, didn't see any voids. I ordered several 2x4...
Worked great for building a credenza. No splitting, didn't see any voids. I ordered several 2x4 sheets instead of the 4x8, it worked out cheaper with shipping. I used 3/4" and 1/2".
Was this helpful?
3
0
I realize you're probably better off with a full panel in terms of cost, but sometimes I think it...
Quality :
3
Value :
4
Seeds Program Review
(What's this)
I realize you're probably better off with a full panel in terms of cost, but sometimes I think it's worth it to get these smaller project panels. They're easy to move, you don't have break down a 4x8 panel, and they're much easier to store if you're not getting right to a project. I've now used several different panels and wood types and this was the first one that has warped slightly. Slightly disappointing., maybe I just got a bad batch?
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers