#1 Home Improvement Retailer

Internet #204635480

Model #2267

1/4 in. x 4 ft. x 4 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)

$6537
  • Free custom cut available - See details below
  • PureBond uses formaldehyde-free, soy-based assembly technology
  • Cost-competitive decorative hardwood plywood
  • View More Details

Frequently Bought Together

+
Price:
$6537

Product Overview

Custom Cut Your Order for Free Here
Homedepot Image

Professional-grade

VENEER-CORE HARDWOOD
PLYWOOD

________________________________

PureBond is available in a wide range of real-wood face veneers, for great design versatility in DIY and professionally-built projects.

Homedepot Image

Formaldehyde-Free

PureBond promotes healthy indoor air quality through its proprietary soy-based resin technology.

Homedepot Image

Perfect for DIY Projects

Build cabinets, furniture, wall paneling, shelving, storage solutions, media centers, headboards and more.  


Homedepot Image

Cost-Effective

Standard sheets are 4’ x 8’. Or choose smaller PureBond Project Panels at homedepot.com to minimize waste.

Use this 1/4 in. x 4 ft. x 4 ft. PureBond Maple Plywood Project Panel for your next cabinetry or furniture project and never worry about it releasing airborne contaminants, as formaldehyde-laden products are prone to do. A decorative maple veneer graces the face of this 3-ply panel, assembled on top of two other veneers with a soy-based PureBond technology that is environmentally friendly and won't off-gas toxic fumes like UF plywood. The natural warmth and beauty of real maple gives the decorative face veneer a splendid appearance that forms the foundation for impressive DIY creations, such as serving trays, end tables, pet food centers, footstools, wall pockets, shelves and more. It's a cost-competitive alternative to products that may degrade indoor air quality over time, and its water resistance further strengthens its endurance for lasting performance.
  • CLICK HERE TO HAVE YOUR PLYWOOD CUSTOM CUT. Please complete your purchase after the form has been submitted. Note: The form is not available on mobile devices.
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • The decorative top veneer, measuring approximately 1/42" thick, exhibits the beauty and timeless quality of natural hardwood and is suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 1/4 in. x 4 ft. x 4 ft.; Actual: 0.203 in. x 48 in. x 48 in.
  • Each panel weighs approximately 11 lbs.
  • Grade: B-1 - See Grading Guide for additional information
  • Available in additional species- Alder, Cherry, Cedar, Hickory, Mahogany, Poplar, Red Oak, Walnut, and White Oak
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Project Panels

1/2 in. x 4 ft. x 4 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)
current product
1/4 in. x 4 ft. x 4 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)
3/4 in. x 2 ft. x 8 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)1/4 in. x 4 ft. x 4 ft. PureBond Cherry Plywood Project Panel (Free Custom Cut Available)
BrandColumbia Forest ProductsColumbia Forest ProductsColumbia Forest ProductsColumbia Forest Products
Name1/2 in. x 4 ft. x 4 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)1/4 in. x 4 ft. x 4 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)3/4 in. x 2 ft. x 8 ft. PureBond Maple Plywood Project Panel (Free Custom Cut Available)1/4 in. x 4 ft. x 4 ft. PureBond Cherry Plywood Project Panel (Free Custom Cut Available)
Price
$6088
$6537
$8083
$9452
Ratings
(347)
(347)
(347)
(304)
Nominal Product Thickness (in.)1/21/43/41/4
Nominal Product Width (ft.)4424
Nominal Product Length (ft.)4484
Plywood FeaturesStainableStainableStainableStainable
Weather ExposureInteriorInteriorInteriorInterior
Engineered Wood TypeHardwood PlywoodHardwood PlywoodHardwood PlywoodHardwood Plywood
Actual Product Length (in.)48.00048.000 in96.00048.000
View ProductView ProductView ProductView Product

Specifications

Dimensions

Actual Product Length (in.)
48.000 in
Actual Product Thickness (in.)
0.203 in
Actual Product Width (in.)
48 in
Nominal Product Length (ft.)
4
Nominal Product Thickness (in.)
1/4
Nominal Product Width (ft.)
4

Details

Engineered Wood Type
Hardwood Plywood
Plywood Features
Stainable
Returnable
90-Day
Shape
Square
Span Rating
Not Applicable
Weather Exposure
Interior

Warranty / Certifications

Manufacturer Warranty
Product warranted against glue or bond failure. Product replacement provided.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.7
    out of 348 reviews
  • 94% recommend this product
Filter by:
Showing 1-30 of 348 reviews
I use these in my laser machine to cut out...
I use these in my laser machine to cut out 24” monograms and they are always great for my customers.
by
  • Verified Purchase
1 person found this helpful
I used this to make a custom coffin longboard for my husband (Maple is a really soft, sturdy wood...
I used this to make a custom coffin longboard for my husband (Maple is a really soft, sturdy wood for boards) and it made a REALLY fun and awesome personalized gift with my Skil-saw and ebony stain I bought from Home Depot. My husband was completely blown away at the quality of the wood/board and that I could have easily spend $200 purchasing something like this but was able to do it all on my own from Home Depot (aside from the grip and wheels ofcourse). I love this wood and the characteristics are beautiful
by
  • Verified Purchase
  • Recommended
Arrived in a box in perfect condition. Worked out...
Arrived in a box in perfect condition. Worked out great for a shop project.
by
  • Verified Purchase
New Kitchen
This plywood is awesome. I used this to build new cabinets for my kitchen. The finish is beautiful. I am very pleased with the outcome. I will definitly use this again when I remodel the bathroom.
by
    • Recommended
    great material!
    great material!
    by
    • Verified Purchase
    • Recommended
    This wood is great for projects. Really nice grain! Love working with this product.
    This wood is great for projects. Really nice grain! Love working with this product.
    by
    • Verified Purchase
    • Recommended
    The Pure Bond maple composite was good to work with. The finish didn't have any blemishes and it ...
    The Pure Bond maple composite was good to work with. The finish didn't have any blemishes and it machined cleanly.
    by
    • Verified Purchase
    • Recommended
    Quality looking plywood
    This has a nice quality uniform look to the plywood. I had this shipped to me and it came well packed with no damage anywhere on it. Easy to cut with a table saw or hand power saw. I used this for the bottom of drawers that I made. It takes stain nicely and evenly. This size is easy to handle and work with. Defiantly be ordering more of this to use in my woodworking shop.
    by
    • Recommended
    2 people found this helpful
    Nice enough for Furniture
    I was really surprised at the nice smooth finish on this piece of plywood. One side is smoother than the other. It is nice enough to use for furniture. Since this was mailed, one of the corners was a little banged up. You can see the crunched corner of the box in the photo. Both sides of the plywood were clean and had no knots. The smoother side has one panel that is a little darker than the others. The Maple bond is about 1/32" thick. Since this is 3/4" thick, it is a nice heavy piece of plywood. I'd recommend this, but you'd need to check each piece of wood for flaws.
    by
    • Recommended
    5 people found this helpful
    INCREDIBLY DISAPPOINTING, TO THE POINT OF ANGER
    While I have done plenty of DIY construction and finish work, have made a number of furniture projects and small, high quality interior items, and built some outdoor and shop cabinets, this project is my first attempt at quality interior casework. I planned for a long time, designed and drew dimensional and elevational sketches , and made extensive cut and process lists before deciding to purchase these project panels from Home Depot. All the reviews indicate 'Ships Free to Store' as an option. It is NOT. The estimated shipping costs were high, but weighed against a 12 mile drive to a proper lumber yard, I elected to make this purchase based upon the positive reviews. ACTUAL shipping costs were MUCH HIGHER than estimated, totalling 70% of the product cost. All of the panels--I purchased 9 of the 2' x 4' in 3/4" and 3 of the 4' x 4' in 1/4"--were damaged, with crushed and very rounded corners, and several with peeling and delaminating veneers at the edges. I intended to use the 3/4" panels as case for console-height bookcases, with three additional panels purchased to laminate with the case to form the top and the 1/4" for the backs. I had to carefully trim all the rounded corners and peeling edge veneers so as to begin with fresh edges. There were no usable machine edges to use as reference. Not only did this trimming add a couple hours of setup time to the project, it also left me without enough material to use for the bookcase tops. I definitely understand that the quality of the packaging is the responsibility of the shipper (Columbia Forest Products), and care taken in the shipping is the responsibility of the shipping company (UPS), but the excessive charge for shipping was made by Home Depot, and all of the foregoing is germane to my product review and needs to be included here. Potential buyers deserve to understand how shipping cost effects overall product cost, and how shipping damage contributes to product wasteage, especially in combination with product quality issues. These panels have NO wood plys whatsoever. The veneers encapsulate what appears to be two different MDF/wood composite-types of materials. The thin-veneer + no wood core combination means these panels have little potential for fastener holding, so all edges needed to be pre-prepped with glue sizing to maximize potential gluing strength, and in addition to gluing I decided to use both pocket screws and edge screws to ensure holding strength. Only time will tell whether they will hold. As I mentioned before, the veneers are thin; ultra-thin, actually--wallpaper is thicker than the maple veneers on these panels. In combination with the composite cores, this actually contributes to the primary positive quality of this product: it machines very easily and precisely, and allowed for me to cut extremely sharp dadoes and rabbets for the shelves and backs of the cases. There was no chip- or tearout, but that is largely because there is nothing TO chip- or tearout. However, the concern remains the same, that the gluing strength just will not be there, and as the shelves are of solid maple 11.5" wide, maximum glue hold would be desirable. The outside of the case where I might have otherwise reinforced with screws or other mechanical fasteners is visible, so no possibility of that. I did a load calculation for solid maple and cross-braced accordingly, and with solid wood trim and top plus a rigid back I will hope that there will be no pressure outward on the cases from the weight within. These cases COULD push apart from the shelf load, as 4 of the 3/4" panels were markedly warped-fortunately inward (according to the "A" face of the veneer), and that indicates to me a lack of dimensional stability in the product. Dimensional stability is why I chose to case this product in plywood in the first place, so that is incredibly disheartening. Added to that dimensional instability is what I now know to be THERMAL instability as well--after the cases were assembled I moved the off-cut portions of the panels out of my small heated shop and into my 'woodshed;' this shed is enclosed and weather-tight, but unheated and only partially insulated, and therefore not much different than your average unconditioned garage space--you know, the place where most people have their workshops. After ONLY TWO DAYS in this shed, I noticed that all the off-cut sections were warping, with veneer delamination all the way across their surfaces, rendering them unusable for other purpose. A total waste of 30% of my purchase. Be advised and warned if you intend to store the raw product or partially finished project in unconditioned space such as garage, shed, unheated basement or unheated shop. Upon completing case and shelf assembly, I noted a few places where glue had squeezed from joints and onto the veneers. In attempting to clean this up, I sanded the veneers lightly by hand with 220 grit sandpaper and a sanding block. The veneers are so thin that a small amount of Titebond squeeze-out was able to soak all the way through the veneer, and I was only able to figure this out by accidentally sanding THROUGH the veneer to the substrate underneath. By hand. Gingerly. With 220 grit paper. THAT is a thin veneer. If you must sand this-and it is nowhere near finish-ready when you get it--you absolutely MUST maintain an extremely deft touch with your sanding procedure. I recommend 320 grit paper, no more than one pass, and DO NOT under any circumstance get glue anywhere where it can be seen and interfere with your finish. When it came to fabricating a top for the bookcases, I decided not to purchase any more of this product and instead special order furniture-quality maple plywood from my nearest lumber yard. Although these project panels are described as a 'cost-effective option,' when shipping costs are factored in, they are not. Especially when compared to far superior maple plywood--I purchased a single sheet of "true 3/4" maple ply for $15 less than the average cost of 4 of these quarter sheets (with shipping factored in), and that includes paying for a rip cut at the lumber yard so I could fit the sheet into my SUV. Any expected convenience of having the panels delivered was well overbalanced by the amount of prep work and product waste that I experienced. Next time I decide to case a project in plywood, I will special order and drive 12 miles to the lumber yard, or drive 27 miles to the nearest specialty lumber retailer and buy off the rack. I won't purchase these again, not on a bet or a dare. As it is, the project is completed. I decided after purchasing additional maple ply elsewhere to go a different direction with my bookcase tops. My concern with the finished product, which I had envisioned as something between high-level casework and fine, heritage furniture is that the quality of the case material-these maple plywood project panels-is just not there and will likely affect the life of the furniture I made. It took me three and a half weeks of evening-and-weekend free time to make these three bookcases (plus an additional two weeks of evenings and weekends to prep and finish the tops I eventually chose to make), and they should last my lifetime-and my daughter's, and her future children's too...but if scratched with the vacuum or left in an unheated space for two days, that will be the end for the casework. I am angry at Home Depot for selling these, and even angrier at myself for buying them and using them. What is done is done, I guess, but be warned before you buy. I have included a photo collage of the completed cases in my workshop, where the finish I applied is curing out before I bring them indoors.
    by
    • DIY
    49 people found this helpful
    Love this!
    I purchased a full sheet to use on some end tables that I was building. This wood is beautiful and I love that it is safe for my family. I used it for the bottom shelves and the tops of my tables. I ended up staining the tops with an Oak stain followed by just a little bit of Kona that I wiped off immediately. I ended up looking great! I would definitely recommend Purebond.
    by
    • DIY
    • Recommended
    7 people found this helpful
    Easy to work with.
    I ordered this online and it was delivered within a few days. The tight grain of this Maple is ideal for making cutting boards for kitchen use. I was able to make six cutting boards from the 2' x 4' piece I ordered. They were edged in 1/4'' Oak. Great Product.
    by
    • DIY
    • Verified Purchase
    • Recommended
    13 people found this helpful
    Looks great
    A couple of ink stains on part of the surface - doesn't affect performance & is covered by computer keyboard anyhow. Overall, very happy with the timeliness and convenience. I didn't have to struggle with loading the plywood into my SUV. That's a big plus.
    by
    • DIY
    • Verified Purchase
    • Recommended
    22 people found this helpful
    Perfect for DIY upholstered headboard.
    I am a beginner to DIY, and extremely satisfied with this product. The surface was smooth and light colored that I could paint on it; the board was easy to cut with the cheapest jigsaw; Also it was easy to adhere with just wood glue. I am not an expert but I heard fusses about the difficulties of stapling on some high density boards, yet this product is just about perfect dense for hand staple guns. I bought a spare board just in case of the measurement isn't right, which I didn't need at all. The measurement was perfect. To anyone who wants to start DIY headboard project, I would recommend this product.
    by
    • DIY
    • Verified Purchase
    • Recommended
    43 people found this helpful
    Rating provided by a verified purchaser...
    Rating provided by a verified purchaser
    by
      by
        by
          by
            I used the free cut option and I’m not gonna...
            I used the free cut option and I’m not gonna lie, I was a little nervous about doing something like that online but it worked perfectly. The cuts were exactly what I requested, the item arrived very quickly and I was pleased with the quality of the wood.
            by
              Why cut to size?
              I ordered this product and asked for it to be cut to size. It was delivered to me in pieces rather than one solid piece. I ordered it cut to size because I don't have the ability to cut/bond the plywood. I would have ordered another (cheaper) product if there had been ANY indication that when you get it cut to size it comes in pieces.
              by
              Response from CFP Customer ServiceSep 20, 2021
              I apologize for the issues you had with our custom cut process. We cut the panel to the dimensions specified, and always ship the remaining balance of the panel along with the cut pieces. Please contact me at mhale@cfpwood.com or 800-637-1609 if you would like to discuss. Thanks - Michael
                It is not 1/4 inch thick. Closer to 3/16. ...
                It is not 1/4 inch thick. Closer to 3/16. It fit too loosely in the 1/4 inch channel I cut for my cabinet door. Beware.
                by
                Response from CFP Customer ServiceAug 27, 2021
                I am sorry that this product did not work for you. The 1/4" is a nominal thickness category. The average actual thickness after drying and sanding is approximately .203"
                  Lots of knots in the wood. I would say the...
                  Lots of knots in the wood. I would say the pieces I’ve received recently are of lower quality.
                  by
                    by
                      by
                        This is a beautiful product. I just hate that it's...
                        This is a beautiful product. I just hate that it's a subfloor that'll be covered by another wood.
                        by
                        • Verified Purchase
                        Rating provided by a verified purchaser...
                        Rating provided by a verified purchaser
                        by
                        • Verified Purchase
                        Maple seems to be on both sides...
                        Maple seems to be on both sides
                        by
                        • Verified Purchase
                        perfect cuts to size and quick shipment. A pleasant project....
                        perfect cuts to size and quick shipment. A pleasant project.
                        by
                        • Verified Purchase
                        Rating provided by a verified purchaser...
                        Rating provided by a verified purchaser
                        by
                        • Verified Purchase
                        Sheets arrived in good condition and the quality is excellent....
                        Sheets arrived in good condition and the quality is excellent.
                        by
                        • Verified Purchase
                        Showing 1-30 of 348 reviews