#1 Home Improvement Retailer

Internet # 100548908

Model # 263012

Store SKU # 263012

3/4 in. x 4 ft. x 8 ft. PureBond Maple Plywood

$5297
Limit 90 per order
Apply Now
Pay $27.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • PureBond uses formaldehyde-free, soy-based assembly technology
  • Cost-competitive decorative hardwood plywood
  • Design versatile traditional, classic, or contemporary looks
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret

Product Details

Exquisite hardwood grains run along the length of this PureBond Maple Plywood Project Panel, featuring rotary-cut veneers from domestically grown, sustainably harvested trees that exhibit the warmth and timeless quality of natural timber. The 7-ply panel is comprised of 100% wood (no MDF or particleboard), boasting a yellow poplar core substrate layered in cross-band formation to fortify its flatness and strength. The soy-based PureBond technology is formaldehyde-free, producing a water-resistant, nontoxic decorative plywood panel that is not prone to warp like solid wood and will not emit harmful fumes like UF-constructed sheets. A cost-competitive alternative to composite panels that may degrade interior air quality over time, this hardwood plywood from Columbia Forest Products is a superb choice for DIYers and professional tradesmen looking for stellar results on their next woodworking project.
  • 7-ply hardwood plywood panel is assembled with smooth, patch-free decorative maple veneers
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • Decorative top and bottom veneers, measuring approximately 1/42 in. thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 4 ft. x 8 ft.; actual: 0.703 in. x 48 in. x 96 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 70 lbs.
  • Grade: C-3 - see grading guide for additional information
  • Available in additional species - birch and red oak
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

caret

Specifications

Dimensions

Actual Product Length (in.)96.000 inActual Product Thickness (in.)0.703 in
Actual Product Width (in.)48 inNominal Product Length (ft.)8
Nominal Product Thickness (in.)3/4Nominal Product Width (ft.)4

Details

Exposure DurabilityInteriorNumber Of PlyMulti-Ply
Panel/Veneer GradeC3Plywood FeaturesPaintable, Sanded, Stainable
Plywood Product TypeHardwoodReturnable90-Day

Warranty / Certifications

Manufacturer WarrantySee store for details
caret

Questions & Answers

82Questions
caret
Q:It says this product is 52.97 but when I add it to my cart, it says 89.00........so what is the correct price?????
by|Nov 20, 2023
1 Answer
Answer This Question

A:  Hi, When I click the product, it shows up on my website as $89.78. Thanks

by|Nov 21, 2023
    caret
    Q:Can I use it in a cabinet for a young man who has to withstand 400 degrees farenge
    by|Nov 18, 2023
    1 Answer
    Answer This Question

    A:  Hi, Yes, these are intended for cabinet usage. They shouldn't have any issue with the 400 degrees.

    by|Nov 20, 2023
      caret
      Q:Can this be used to create a panel for a fully integrated panel ready refrigerator that requires 3/4 thickness and must be 23 1/2x79 7/8? What do you recommend using to finish the cut edge?
      by|Oct 23, 2023
      1 Answer
      Answer This Question

      A:  Hi, I will say that we do not offer custom cuts for the 4x8 so you could have to make the cuts yourself. For the cut edge, I would recommend talking with someone at Hoem Depot. They will know exactly what you will need for that. If you have more questions, you can reach me at alec.neugent@cfpwood.com.

      by|Oct 25, 2023
        caret
        Q:Can this plywood be used to make cabinets/island that will have a butcher block top and heavy appliances on top? The cabinet will likely need to hold up to 500 lbs. Thank you.
        by|Oct 20, 2023
        1 Answer
        Answer This Question

        A:  Hi, It would work well for the application. The panel is intended for cabinets, built-ins, shelving, etc

        by|Oct 23, 2023
          Showing 1-4 of 82
          caret

          Customer Reviews

          3.7 out of 5
          (367)
          • 3.7
            out of 367 reviews
          • 58% recommend this product
          Filter by:
          Showing 1-10 of 367 reviews
          From an over 20 yrs experienced carpenter
          If you wish to use water-based paint on this type of plywood then your work will look very cheap and bad, if you use oil based it is OK, make sure you use Catalyzed Paint with Lacquer, and the finish will be smooth and amazing!
          by
            • Recommended
            5 found this review helpful
            Worst wood product I have ever used
            I purchased this product to fabricate a large shelving unit for a client. As soon as I sprayed the first coat of primer, random bubbles appeared in the outer veneer. The remedy, required extensive repair to all of these areas in my fabricated units. I had found and repaired 32 holes ranging from 1/2 inch in diameter up to a 7 inch long gash. These holes appeared in approximately 3 sheets of actual material used. I spent as much time repairing the defective wood as I did in fabrication.
            by
            Response from CFP Customer ServiceJan 27, 2023
            Hello,
            I apologize for the issue. The plywood should not have the issues you describe in the review. I would like to discuss the issue with you and see what we can do to make it right. I can be reached at kcrisp@cfpwood.com. Kevin
              4 found this review helpful
              Perfect Plywood for quality furniture
              I use maple often to build furniture. I gave it 4 stars because sometimes I'll get a sheet cut and home and the laminate is coming apart. Definitely check over the sheet a few before you leave. Other than that, its perffect for all your DIY projects!!!
              by
              Response from CFP Customer ServiceMar 1, 2021
              Thank you for the positive review! I am glad that this product seems to be working well for you. If you have a delamination like you mention in your review, email me at mhale@cfpwood.com so we can discuss. You should not have that issue. Thanks - Michael
                • Recommended
                3 found this review helpful
                Absolutely junk
                Normally I don't bother buying any lumber from box stores, but it was close to home and starting to rain. I did get it inside still dry, but the second I began to spray latex primer on it it started to delaminate. I had it inside my shop at least two weeks before even thinking about spraying, but this sealed the deal with me. You won't sell another junk piece of lumber to me at any price. Now I have a few thousand dollars worth of cabinetry I have to explain away to my customer. How about you calling them to explain why it's such trash and it was my fault for buying from you in the first place?
                by
                Response from CFP Customer ServiceJan 19, 2021
                I apologize for the issues you had with our product. You should not have had the issues you describe here and we'd like to make it right. Give me a call at 800-637-1609 or email mhale@cfpwood.com so we can discuss. Thanks -- Michael
                  10 found this review helpful
                  Wanted good wood for a cornhole boards, end the wood...
                  Wanted good wood for a cornhole boards, end the wood was great.
                  by
                  • Verified Purchase
                  Cabinet-grade plywood, internally flawless, perfect for construction and painting...
                  Cabinet-grade plywood, internally flawless, perfect for construction and painting
                  by
                  • Verified Purchase
                  3 found this review helpful
                  I read all of the comments on this product before I purchased it. I used it for the top or work s...
                  I read all of the comments on this product before I purchased it. I used it for the top or work surface for a "built in" Home Office. I wanted Maple to match the base cabinets that I installed. I had Home Depot cut each piece in two, to my dimensions. Examining the cut, I found no voids in either of the four pieces. I made other cuts for final fit and small patches and again I did not find any voids of any concern. The pieces I purchased definitely had one "finished" side that was smoother than the other. The top veneer appears to be very thin, so use care.
                  by
                  Response from CFP Customer ServiceMay 29, 2020
                  I am glad to hear that our product worked well for you. Thank you for the positive feedback!
                  • Verified Purchase
                  • Recommended
                  8 found this review helpful
                  I love working with this Maple plywood, easy to cut, tear out is not much of a problem and it loo...
                  I love working with this Maple plywood, easy to cut, tear out is not much of a problem and it looks great. If you have a little extra cash in your project budget, up grading to maple is not a bad ideal.
                  by
                  • DIY
                  • Verified Purchase
                  • Recommended
                  1 found this review helpful
                  Furious with myself for not listening to bad reviews....Absolutely Horrible
                  I'm so upset with myself for not heeding the warnings from other reviewers. I thought to myself "They probably got a bad batch. I doubt I'll have the same misfortune." WRONG. I just finished this midcentury piece that was painted with an "eggshell" finish. The voids under the veneer are obvious and the surface isn't smooth. There are round "bubbles" all across the surface. I can feel where the veneer is already delaminating is areas. What a complete waste. I'm going to have to have a piece of custom tempered glass cut and made to fit this top and try and salvage this piece. The glass is going to cost me 3x what the plywood did. it's not the $55 lost on the plywood that hurts. It's the hours and hours into this project that are wasted. Don't waste your money and especially your time on a poor quality product. Buy a higher quality plywood like Baltic Birch or find another plywood supplier.
                  by
                  Response from CFP Customer ServiceFeb 16, 2020
                  I apologize for the issues you had with our product. I'd like the opportunity to discuss this with you in more detail and see what we can do to make it right. Give me a call at 336-291-5869 so we can discuss. Thanks -- Michael
                    13 found this review helpful
                    Just what I needed to finish my job. The...
                    Just what I needed to finish my job. The door needed repairs.
                    by
                    • Verified Purchase
                    Showing 1-10 of 367 reviews