Internet #100548908

Model #263012

Store SKU #263012

3/4 in. x 4 ft. x 8 ft. PureBond Maple Plywood

  • PureBond uses formaldehyde-free, soy-based assembly technology
  • Cost-competitive decorative hardwood plywood
  • Design versatile traditional, classic, or contemporary looks
  • See More Details

Product Overview

Exquisite hardwood grains run along the length of this PureBond Maple Plywood Project Panel, featuring rotary-cut veneers from domestically grown, sustainably harvested trees that exhibit the warmth and timeless quality of natural timber. The 7-ply panel is comprised of 100% wood (no MDF or particleboard), boasting a yellow poplar core substrate layered in cross-band formation to fortify its flatness and strength. The soy-based PureBond technology is formaldehyde-free, producing a water-resistant, nontoxic decorative plywood panel that is not prone to warp like solid wood and will not emit harmful fumes like UF-constructed sheets. A cost-competitive alternative to composite panels that may degrade interior air quality over time, this hardwood plywood from Columbia Forest Products is a superb choice for DIYers and professional tradesmen looking for stellar results on their next woodworking project.
  • California residents
  • 7-ply hardwood plywood panel is assembled with smooth, patch-free decorative maple veneers
  • PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time
  • Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants
  • Decorative top and bottom veneers, measuring approximately 1/42 in. thick, exhibit the beauty and timeless quality of natural hardwood and are suitable for painting or staining
  • Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood
  • Allow panel to acclimate to interior climate conditions for several days before customizing - for interior applications only
  • For best cutting results, use an 80-tooth (or greater) table saw blade intended for sheet goods or a carbide-tipped circular saw plywood blade
  • Common: 3/4 in. x 4 ft. x 8 ft.; actual: 0.703 in. x 48 in. x 96 in.
  • Direction of the grain is the length of panel
  • Each panel weighs approximately 70 lbs.
  • Grade: C-3 - see grading guide for additional information
  • Available in additional species - birch and red oak

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Actual Product Length (in.)
96.000
Actual Product Thickness (in.)
0.703
Actual Product Width (in.)
48
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
23/32
Nominal Product Width (ft.)
4

Details

Engineered Wood Type
Hardwood Plywood
Plywood Features
Stainable
Returnable
180-Day
Span Rating
Not Applicable
Weather Exposure
Interior

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers

58Questions16Answers

is it possible to buy this product and have someone in Homedepot cut to 3/4" square slats (total ...

Asked by sy November 2, 2020
1
Answer

Home Depot will provide cuts - it may cost a little extra since there are a large amount of cuts - check with you local HD store

can this be used for subfloor 3/4 and 1/2 for 1-1/4 substrate for tile bathroom. i already purcha...

Asked by erock September 29, 2020
2
Answers

no I would not recommend for subfloor I would use treated plywood

Marine plywood 3/4 4by 8 sheet

Asked by Rhonda August 27, 2020
1
Answer

We do not manufacture marine grade plywood. This product would not work for that application

Can anyone who was asked to contact CFP Customer Service for a problem resolution please chime in...

Asked by MacGyver August 25, 2020
1
Answer

I'll be glad to help. Email me at mhale@cfpwood.com or call 336-291-5869 so we can discuss the issues in detail and work towards a resolution. Thanks -- Michael

Is this item in stock in Albuquerque

Asked by TG August 1, 2020
1
Answer

"Dear Valued Home Depot Customer, To better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question."

I'm replacing the cabinet doors on my kitchen cabinets. Is this recommended, or is there another ...

Asked by Kevin July 25, 2020
1
Answer

Please reach out to me by phone or email so we can discuss. I'd like to get some more detail on your project before making a recommendation. mhale@cfpwood.com or 336-291-5869. Thank you -- Michael

Can you use for butcher block countertops

Asked by Steve May 25, 2020
2
Answers

no

Would you be able to cut this product in half to get two 4x4 pieces?

Asked by Liz May 24, 2020
3
Answers

yes but it would be slighty smaller than 4 ft about 1/8" smaller

Description says 7-ply but I only see 5. Does the veneer on both sides considered as a ply?

Asked by Joey May 18, 2020
2
Answers

yes it is really good plywood I used it on my cabinet front doors and drawers pull fronts bye one sheet to see if you like the way it looks when stained our painted i think you will like it

IS THIS B1 RATING?

Asked by DKM May 15, 2020
2
Answers

No, its C3

3/4 in. x 4 ft. x 8 ft. PureBond Maple Plywood - page 2

Customer Reviews

  • 274 Customer Reviews
  • 3.7 out of 5 stars overall
61% of customers recommended.
Overall Ratings
5star-icon(118)
4star-icon(49)
3star-icon(44)
2star-icon(25)
1star-icon(38)
Sort By:
Wanted good wood for a cornhole boards, end the wood...
Wanted good wood for a cornhole boards, end the wood was great.
Was this helpful?
0
0
Cabinet-grade plywood, internally flawless, perfect for construction and painting...
Cabinet-grade plywood, internally flawless, perfect for construction and painting
Was this helpful?
2
0
I read all of the comments on this product before I purchased it. I used it for the top or work s...
I read all of the comments on this product before I purchased it. I used it for the top or work surface for a "built in" Home Office. I wanted Maple to match the base cabinets that I installed. I had Home Depot cut each piece in two, to my dimensions. Examining the cut, I found no voids in either of the four pieces. I made other cuts for final fit and small patches and again I did not find any voids of any concern. The pieces I purchased definitely had one "finished" side that was smoother than the other. The top veneer appears to be very thin, so use care.
Was this helpful?
4
0
Response from CFP Customer ServiceMay 29, 2020
I am glad to hear that our product worked well for you. Thank you for the positive feedback!
I love working with this Maple plywood, easy to cut, tear out is not much of a problem and it loo...
I love working with this Maple plywood, easy to cut, tear out is not much of a problem and it looks great. If you have a little extra cash in your project budget, up grading to maple is not a bad ideal.
Was this helpful?
1
0
Furious with myself for not listening to bad reviews....Absolutely Horrible
I'm so upset with myself for not heeding the warnings from other reviewers. I thought to myself "They probably got a bad batch. I doubt I'll have the same misfortune." WRONG. I just finished this midcentury piece that was painted with an "eggshell" finish. The voids under the veneer are obvious and the surface isn't smooth. There are round "bubbles" all across the surface. I can feel where the veneer is already delaminating is areas. What a complete waste. I'm going to have to have a piece of custom tempered glass cut and made to fit this top and try and salvage this piece. The glass is going to cost me 3x what the plywood did. it's not the $55 lost on the plywood that hurts. It's the hours and hours into this project that are wasted. Don't waste your money and especially your time on a poor quality product. Buy a higher quality plywood like Baltic Birch or find another plywood supplier.
Was this helpful?
10
0
Response from CFP Customer ServiceFebruary 16, 2020
I apologize for the issues you had with our product. I'd like the opportunity to discuss this with you in more detail and see what we can do to make it right. Give me a call at 336-291-5869 so we can discuss. Thanks -- Michael
Just what I needed to finish my job. The...
Just what I needed to finish my job. The door needed repairs.
Was this helpful?
0
0
Great product and consistency of quality. Used it to make a bathroom vanity for my basement and ...
Great product and consistency of quality. Used it to make a bathroom vanity for my basement and it looks great.
Was this helpful?
1
0
I used this product to build a home theater cabinet. I found it to be of very good quality. It st...
I used this product to build a home theater cabinet. I found it to be of very good quality. It stained nicely with a beautiful grain. I would purchase it again.
Was this helpful?
0
0
Hi. I shop alot St Home depot, and it's always hit or miss with the plywoods
Hi. I shop alot St Home depot, and it's always hit or miss with the plywoods
Was this helpful?
2
0
Response from CFP Customer ServiceMarch 15, 2019
Let's discuss these issues in more detail. Contact Michael at mhale@cfpwood.com and we will address the problems. Thank you.
I built a 8ft mantel. It performed as expected to finish my project but the bonding could be a bi...
I built a 8ft mantel. It performed as expected to finish my project but the bonding could be a bit better.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers