Moroccan 48 in. x 10 in. Satin Nickel CCT Selectable LED Flush Mount Ceiling Light 4000 Dimmable Lumens

I got this light to replace the old “dressing room” style vanity light in my bathroom. The cover is all plastic pieces but they work. I had to modify installation a little bc the drywall anchors didn’t work. I used my own anchors with washers. I’m happy.

This is a very bright, energy efficient ceiling light! It's perfect for garages and laundry rooms, just be ready for a major difference if you are replacing old florescent fixtures. This light will be much much brighter! The fixture is lightweight, but unfortunately it requires an electrical box due to the design with integrated LEDs. Pretty much all LED fixtures work this way now, so the major difference is that you can't do the wiring inside the fixture itself like you could with the old florescent fixtures. This fixture doesn't even have a 2" knockout to allow the electrical wiring to go inside and that makes sense since the wiring would block some of the LEDs and affect the light that is emitted. Unfortunately, I have existing fixtures that were just mounted through the ceiling with drywall anchors and the electrical wiring was done inside the old fixtures, so there's no electrical box to work with. Even though the weight of this new fixture is comparable to the existing fixtures (no heavy ballast, just a lightweight AC/DC LED driver), I can't take the risk of having the ceiling drywall break apart during installation. The blue old-work fan box cannot hold the entire weight of the fixture during installation, so the two drywall anchors on the side must be used. Better yet, if you can line up two ceiling joists, you can use the two wood screws and metal washers instead of the drywall anchors. In order to install this new fixture correctly, you really need an electrical box mounted directly to a ceiling joist. This is the best and safest way to install these fixtures. If you already have an electrical box secured to a ceiling joist, this installation will be extremely easy and only one person would be needed. If you don't, and you can't install one yourself, you'll need two people. My existing fixtures happen to be directly above attic space that has plywood blocking access to the ceiling from above, so it's a very challenging installation without an existing electrical box. On the plus side, I really like how easy it is to remove the plastic holders on each side of the new fixture. You can do it all by hand, this is so much better and easier than the fixture it replaced. There are small tabs on the covers so you can insert a small thin screwdriver to pry the cover off, but you don't even need a tool, you can get the side covers off by hand. I have no idea if the LED driver is replaceable long term if the light fails, but it looks like it would be simple enough with some soldering. We all know that LEDs like this are expected to last a very long time. It's also dimmable! So if the light is too bright, say for the laundry room, you can install a dimmer switch and make things work. Really love the exterior switch that allows the color temperature to be changed. This is especially helpful if you forget to set it and then need to change it. Once you set it to your preferences, you shouldn't ever really need to set it or change it again, but it's there and very easy to do from the outside of the fixture, even after installation! Overall, this is an excellent fixture, the base is metal and the covers are all hard plastic, including the side covers with the design integrated on them. Some people may prefer metal covers on each side, but the plastic ones are lightweight and so much easier to deal with. I've worked with other fixtures that have plastic covers that fit into the metal on the sides and they are an absolute pain to deal with. This fixture assembles so easy with the plastic side covers that can be easily removed and re-installed by hand! No more broken light shields anymore!

I got this Commercial Electric Moroccan 48 in. x 10 in. Dark Bronze CCT Selectable LED Flush Mount Ceiling Light 4000 Dimmable Lumens to replace a lamp in the dining room. The "dark bronze" parts are dark plastic, but once it's up you don't notice the difference anymore. I like that the light is dimmable and that you can change the light color. To change the light color you slide a little plastic lever on the side of the lamp. Not easy to reach but still a nice feature. Installation is easy, if you're comfortable working around electricity.

Read the instructions before you try to remove the defuser. You need to remove the nut (See Photo) from the decorative plastic end cap before removing end cap or you will break the plastic. It was very loose, no need for any tools. There are two built in dry wall anchors to help secure it to the ceiling (See Photo). Once attached to the electrical box, you simply run them in. The light is color temperature selectable from a built-in switch that does not require you to access the inside of the light. You can change the color temperature as often and as easily as you like from the outside of the light (See Photo). It achieves this by selecting which LEDs it lights up. There are two different color temperature LEDs, it lights one, or the other, or both (See Photo). This light is also dimmable with a proper dimmer installed (not included). The entire box was delivered wrapped in a plastic wrap. This protects the box from damage should it get wet. There are many protruding screws on the back side of the light (See Photo). Be aware of this before you place it on anything you don’t want scratched like a floor of table.

Overall, I like this light but there were a couple of things to criticize. I put this in my garage workshop though it is really meant to replace fluorescents in a kitchen. I used the 4000K tone setting here as 5KK was too harsh. Gives me the light I needed in a space that is really hard to light and see well. Really liked that the tone switch is accessible all the time. Many fixtures have to be taken apart to reach the tone switch. The criticism has to do with the mounting. The main mount is a plate that attaches to the electrical box. First problem is that the wires and ground screw on the fixture are in the way and keep the fixture from laying flush (see pic). While the light is sturdy enough when fully assembled, the main sheet metal plate that mounts to the ceiling and elec box is too flexible without the lens in place. I added an extra screw on each end to hold the light straight. The fixture does have 2 built in places to mount to drywall but that didn't help me in my installation. Got it done and it looks and lights well with just a bit of modification for my situation.

This is a very bright nice looking fixture. Installation was very simple and straightforward. We replaced a flush mounted ceiling light with this fixture. They provide you everything you need to install the fixture. There are two additional drywall anchors pre-installed in the base. These screw right into the drywall and cinch the base up tight to the ceiling. The switch to change light color is located on the outside which makes it easy to change the light color. Very stylish and bright,

The commercial electric 48” LED light was easy to install. The instructions are clear and easy to read. The back plate was the only step that seemed confusing. I’ve installed a lot of this type of fixtures. But, I got through that step. The light includes multiple screws and washers to accommodate different electrical boxes. And a chain to hang light from to easy 1 person installation. Great one step anchors. The best feature is the 3 light settings from warm to daylight. Light output is 4000 lumens. I installed in a garage. This light is much too nice for that. Better suited in a kitchen or laundry room.

The color changing feature and ability to dim this LED fixture are the key selling points. Based on its design it is best suited for residential, not commercial use. It is easy to install, has good instructions, and a simple design. On the downside the pigtail for the wiring is designed for the fixture to be center-mounted over a ceiling box; the pigtail is too short to have the fixture mounted to an off-center box. The fixture could be re-wired if needed for that application, but it was not designed that way, as it does not have the conduit knockouts that would be expected in a commercial fixture for wiring versatility. This is an economy unit that should be compared to similar household fixtures.

My new favorite light fixture. This light has many features. My absolute favorite is the small slide switch mounted on the metal pan just above the diffuser. It lets you select either 3000K, 4000K or 5000K light temperature. I have some lights that are changeable but none with a ready accessible switch. Many times the bright white light is best for what you are doing and sometimes one of the others is best. It is great to be able to reach up, change it for a while and then change it back without disassembling something. If the look of the small unobtrusive slide lever doesn't suit you, it can easily be removed and stowed somewhere until you need it. Disassembly for mounting is as easy as it can be. Remove either end cap, remove the decorative trim and slide the diffuser out. Wire and mount the base and put it back together. Couldn't be easier. The light output is equivalent to 3 fluorescent tubes at 4000 lumens. It has a 5 year warranty and rated for 50,000 hours of use.

Flush mount ceiling lights tend to blend into their surroundings giving light without attracting a lot of attention. The decorative satin finish and arch adds character. It was fairly easy to install, the directions were included in the box. They have made it available for a one-person install with pre-installed anchors. It took over an hour to install. My main concern was that we have popcorn ceiling and I wanted to make sure the footprint would match. I wish I had the time to remove the popcorn but it may be my summer project. The light is the perfect fit with it's slim, sleek, modern design. I never realized how dull our lighting was until we installed this light. It's amazing! You can adjust the color/power of the light with an integrated switch, (3) settings - soft white; bright white; daylight. We choose to leave it on daylight, the bright light setting was super, super bright. It would work well in a dark location. The switch to change the color is located at the top next to the ceiling and easy to switch standing on a step ladder. No bulbs required, energy efficient, maintenance free. Great upgrade!