Ultra Slim 6 in. Selectable CCT Canless Color Integrated LED Recessed Light Trim Downlight 900 Lumens Dimmable

These lights were a perfect solution for my lighting my large open basement. They installed very easily in my suspended ceiling. I used a total of 18 of these lights with approximately a 6 foot separation between lights. They brighten up the room beautifully. In addition, the color of these LED lights may be adjusted from a very bright white light to a warm, incandescent-like appearance. I found that the middle setting was perfect for me. The icing on the cake is that these lights are dimmable, making them the perfect solution I was hoping to get. I will purchase more for additional rooms. and the light

Very bright lights even at only 15 W. Can be installed under trusses and still work in most cases. Good product

Fantastic addition to our kitchen!

These are BRIGHT! But wow, these upgrade every space and make them look so good. I bought 16 total lights to replace the bulb lights and shop light that was in our kitchen and an immediate upgrade took place. We have received endless compliments already with the LED lights on. I had used the 5000K setting(the brightest) and highly recommend using throughout your home/business, etc. These are easy to install with just making sure the power is off, splicing the wire you need to connect to the light and putting into the recessed lighting nuts that you just push into and BOOM, done. My only 1 recommendation is to slightly cut the hole smaller than the provided 6in. template. If you cut it perfectly to 6in. Then you may not see excess holes, but it's more snug with just keeping it slightly smaller. Overall, appealing, good price, great lighting and easy install. You NEED these!!

These lights are legit. Drill/cut a hole, fish a wire, connect the wires, clip in the light, voila!!

We ordered the 8 pack for our kitchen remodel and needed a shallow flush mount in order to be able to place them wherever we wanted to without any constraints from the position of the overhead rafters in the ceiling. By rigging a temporary frame to test the amount of light and ideal placement, we were able to determine that we actually needed only four units instead of the anticipated five units to provide full lighting coverage over the kitchen counter and sink in front of a 12 foot window. The spring clips have a much stronger spring tension than I was expecting and it is ideal for gripping to a double layer of drywall that our kitchen ceiling has from a prior radiant heating panel that we no longer use. We experimented with several color settings to determine which would work best and we were able to move the temporary frame we mounted them on to find the best position that would eliminate unwanted shadows over the kitchen sink and countertop work spaces. This would not have been feasible to do with traditional can lighting. These lights seem brighter to me than their incandescent equivalents, but that may be simply due to the difference in diffusion with multiple LED cells vs. a single tungsten filament bulb. The only issue we found was a slightly bent frame on some of the lights right out of the original packaging that are a bit of a challenge to straighten without scratching or damaging the light. It was just enough to prevent the frame from mounting completely flush with the ceiling that cast a slight shadow around the rim. Other than that minor detail, you can't go wrong with these. They certainly exceeded our expectations stemming from prior experience with other LED lighting products. These are quite robust. Installing them where blown in insulation is used will require a barrier to prevent unwanted spills into your room from above when the light is removed to replace it or to change the color switch setting and something as simple as a cardboard box stapled or taped in place above the unit is all you'll need.

Just installed 15 of these lights in my basement. Easy to wire and link together, the temperature feature is great and all the lights are consistent. Used the Milwaukee adjustable recessed lighting hole saw to cut the holes at 6.25 inches and these lights fit in perfectly. Would recommend for any new recessed lighting project.

I order an 8 pack to install in my kitchen, so happy I did, receive many compliments. I definitely will enjoy my new lights.

Bought these LEDs specifically because the instructions said it could be installed in a 5 1/2" hole to replace some existing can lights. Waited several weeks for the lights to be delivered only to find out it requires at least a 6 inch hole. So I either have to cut all new holes or widen them by 1/2 an inch. Complete waste of time.

We spent a lot of time and money installing ten of these lights, only to discover too late that each one had blotchy, discolored artifacts around the edges (see photo). Not as noticeable at full brightness — which we don’t use — but when dimmed, the flaws diminish the quality appearance of what otherwise seems to be a well designed fixture. Poor quality control.