
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Flex-A-Fill Professional Grade, from Crafco, Inc. is a hot poured polymer modified asphalt sealant used to seal cracks in streets, driveways, and commercial parking lots. Flex-A-Fill Professional Grade MUST be used in a Direct Fire or Oil Jacketed professional melter applicator machine. Resists cracking in the winter and is highly resistant to tracking or pick-up by vehicle tires at warm summer temperatures. Rapidly sets and strongly adheres and bonds to the pavement. Tested to specification properties of ASTM 6690. Environmentally friendly, contains no VOC. Flex-A-Fill Professional Grade has been the choice of contractors and agencies for over 40-years. This sealant is Professional Grade for commercial use only.
Color Family | Black |
|---|---|
Drying Time (hours) | 2 |
Features | Fast Setting, Self-Leveling |
Product Weight (lb.) | 30 lb |
Repair Type | Crack Filler, Sealant |
Returnable | 90-Day |
Manufacturer Warranty | CRAFCO, Inc. warrants that CRAFCO products meet applicable ASTM, AASHTO, Federal or State specifications at time of shipment. |
|---|
It is best to wait until the surface of the Flex-A-Fill is no longer tacky, which is usually within 24 hours.
Typically, Flex-A-Fill will remain flexible down to 0 ⁰F (-18 ⁰C).
No - Per the Installation Guide (https://images.homedepot-static.com/catalog/pdfImages/50/50334501-a771-4dda-9d12-5e01f12bb6af.pdf) located above: FLEX-A-FILL PROFESSIONAL GRADE requires melting in a direct bottom fired or double boiler type melting unit.
I wouldn’t. That’s about sketchy. You can rent a melter or hire a professional. This has a heating point of @350degrees.
No - Per the Installation Guide (https://images.homedepot-static.com/catalog/pdfImages/50/50334501-a771-4dda-9d12-5e01f12bb6af.pdf) located above: FLEX-A-FILL PROFESSIONAL GRADE requires melting in a direct bottom fired or double boiler type melting unit.
Yes. As long as you have a melter to apply the material. Not for the typical homeowner. Machine needed in pic.
Yeah at the rate I’ll spend the extra couple more dollars for the better quality brand
They just raised it again. It cost 31 at all asphalt companies. No way I’m paying $46. Good luck Home Depot.
GREED!!
Viewing 1-8 of 16
4.4 out of 5