Model # 15212

Internet #202585414

Store SKU #243078

Store SO SKU #1000759912

0030699152124

Crown Bolt

5 in. Zinc-Plated Corner Brace

  • Easy to install for added secure fit on right-angle corner joints
  • Countersunk design lets screws sit flush with surface
  • Rust resistant; Suited for both indoor and outdoor applications
$ 2 77
Loading Options
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Easy to install for added secure fit on right-angle corner joints
  • Countersunk design lets screws sit flush with surface
  • Rust resistant; Suited for both indoor and outdoor applications
The Everbilt 5 in. Corner Brace is ideal reinforcement for inside right-angle corner joints. Perfect for use with wood. Countersunk design allows screws to sit flush with the material.
  • Made of steel
  • Zinc-plated finish
  • Ideal for use with wood on indoor and outdoor applications
  • Screws are not included
  • 6-hole design

Product Overview

  • Easy to install for added secure fit on right-angle corner joints
  • Countersunk design lets screws sit flush with surface
  • Rust resistant; Suited for both indoor and outdoor applications
Model #: 15212
Sku #: 243078
Internet #: 202585414

The Everbilt 5 in. Corner Brace is ideal reinforcement for inside right-angle corner joints. Perfect for use with wood. Countersunk design allows screws to sit flush with the material.

  • Made of steel
  • Zinc-plated finish
  • Ideal for use with wood on indoor and outdoor applications
  • Screws are not included
  • 6-hole design

Specifications

Dimensions

Product Depth (in.)
1
Product Length (in.)
5
Product Width (in.)
5 in

Details

Brace type
Angle
Builders Hardware Product Type
Braces
Color
Silver
Color Family
Silver
Connector Finish
None
Fasteners Included
Fasteners Not Included
Features
No Additional Features
Material
Zinc
Package Quantity
1
Returnable
30-Day

Warranty / Certifications

Manufacturer Warranty
None

Specifications

Dimensions

Product Depth (in.)
1
Product Length (in.)
5
Product Width (in.)
5 in

Details

Brace type
Angle
Builders Hardware Product Type
Braces
Color
Silver
Color Family
Silver
Connector Finish
None
Fasteners Included
Fasteners Not Included
Features
No Additional Features
Material
Zinc
Package Quantity
1
Returnable
30-Day

Warranty / Certifications

Manufacturer Warranty
None

Questions & Answers

This brace looks like it is wider than a right angle. Is it a right angle?

This brace looks like it is wider than a right angle. Is it a right angle?
Asked by: Cady
It's a right angle. Picture is misleading.
Answered by: PACOD3
Date published: 2019-01-08

What size wood screws fit this?

Asked by: Tammy
You can use #10 Flat head screws.
Answered by: Supplier Quality
Date published: 2019-03-13

What is the center to center distance of the innermost and outermost holes?

What are the distances between the holes?
Asked by: Matt439
The distance center line to center line of the first and third hole is 3-3/4"
Answered by: TJW777
Date published: 2019-04-07

Could these be bent rounded

Asked by: Ping
The brace can be rounded if it is done slowly and carefully.
Answered by: Supplier Quality
Date published: 2019-01-12
  • y_2019, m_5, d_19, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_, sid_202585414, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 28ms
  • QUESTIONS, PRODUCT

Customer Reviews

5 in. Zinc-Plated Corner Brace is rated 4.7 out of 5 by 27.
Rated 3 out of 5 by from This 5" x 1", fully zinc-plated corner brace has one important job and that job is securing 2 unr... This 5" x 1", fully zinc-plated corner brace has one important job and that job is securing 2 unrelated items together at 90 degrees. Sounds simple. This brace will normally do that job very well and should last a long time. However, I found when I used this brace on the end-grain of 2 cleats that I was reinforcing for shelving the screw holes were too close to the end grain which split the cleat and compromised it's strength. The wood is doing the job as well as the cleat. When it split I had to replace it.. I also couldn't pre-drill the hole because the head of my drill was too large and the hole in the cleat was so close to the joint that it would have pushed the drill bit in at an angle through both pieces compromising both end grains. So I'm not sure why they designed the brace with holes so close to the joint but it ruined some lumber for me. I ended up replacing the lumber and using a different brace. If you're using these on the end grain of wood you may want to think twice. It's not totally user friendly for pre-drilling and not ideal for end grain applications.
Date published: 2019-04-15
Rated 5 out of 5 by from 5 Inch Corner Brace. One inch wide and zink plated for corrosion protection. Three mounting hol... 5 Inch Corner Brace. One inch wide and zink plated for corrosion protection. Three mounting holes per side with chamfer on the inside to have the mounting screw head even with the brace surface. About 1/8 inch thick and has a tight bend. I use these braces to mount flower boxes I make so its not technically a corner brace. I mount the brace on the outside of the house and lay the flower box on the bottom of the brace. Then screw the brace from the bottom into the bottom of the flower box. The braces shown in one of the photos are from a previous project and are larger than 5 inch.
Date published: 2019-04-06
Rated 5 out of 5 by from Reviewing the 5” zinc-plated corner brace. I used these to install small shelves in my workshop.... Reviewing the 5” zinc-plated corner brace. I used these to install small shelves in my workshop. They are strong and easily accommodate the 1” x 6” shelving boards I use. I can load up the shelves and not have to worry about the weight causing the brace to bend. These are very good quality. The zinc coating completely covers the base metal so should not have any rust issues. The 90 degree bend is smooth and rounded which gives the brace strength. I’m very happy with this product and would recommend it to others.
Date published: 2019-04-06
Rated 5 out of 5 by from This corner brace is priced great! I got them to use as an alternative to pricey shelf supports. ... This corner brace is priced great! I got them to use as an alternative to pricey shelf supports. The least expensive shelf brackets I found were $12. These work great for the open shelf. industrial style that is so popular right now. They are extra special corner braces because they are zinc plated, so they will not rust and can be used indoors or outdoors. The three holes are off set as to add more stability and the screw holes are counter-set so the screws finish flush.
Date published: 2019-04-22
Rated 5 out of 5 by from This five inch corner bracket will hold up to most any task. Quality throughout. The zinc plating... This five inch corner bracket will hold up to most any task. Quality throughout. The zinc plating will slow down if not stop any rusting. Screws DO NOT come with this product. The ninety degree angle is just that...ninety degree. I recommend a #10 size screws. The bracket holes are countersunk-tapered to accommodate flat head screws for flush fitting, though it will accept whatever you can fit through the hole.
Date published: 2019-04-12
Rated 5 out of 5 by from We are using the brackets to reinforce part of our... We are using the brackets to reinforce part of our feline play structure ala _Animal Cribs_, and so far, none of our cats have bent them or been panicky because they shifted underneath. The offset mounting holes give an extra bit of security, and the brackets were easy to use.
Date published: 2019-04-16
Rated 5 out of 5 by from Good quality metal and finish. I used two to... Good quality metal and finish. I used two to hand a 12 foot wener ladder. Made a 90 degree bend on one end of each with the aid of a propane torch.
Date published: 2019-04-23
Rated 5 out of 5 by from These look great for an industrial look. They are sturdy... These look great for an industrial look. They are sturdy and we used them for shelves in a laundry room.
Date published: 2019-04-16
  • y_2019, m_5, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_, sid_202585414, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • REVIEWS, PRODUCT