Model # FP3331-2T

Internet #203705523

Store SKU #896774

Store SO SKU #1000114789

Custom Building Products Fusion Pro #333 Alabaster 1 Gal. Single Component Grout
0010186802510

Custom Building Products

Fusion Pro #333 Alabaster 1 Gal. Single Component Grout

  • Unsurpassed stain resistance with no sealing required
  • Ultimate color consistency
  • Easy to spread and clean
$5497 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Unsurpassed stain resistance with no sealing required
  • Ultimate color consistency
  • Easy to spread and clean
Custom Building Products #333 Alabaster 1 Gal. Fusion Pro Single Component Grout is a professional grade, single component sanded grout. Fusion Pro requires no mixing and is ready to use on ceramic, porcelain, glass tiles and polished natural stone. It is suitable for exterior and interior wall and floor use.
  • Advanced acrylic plus silicone resin formulation
  • Provides superior color consistency
  • Includes microban antimicrobial product protection to inhibit the growth of stain causing mold and mildew on grout
  • Easy to use, won't effloresce, spreads easily, saves time because it doesn't need to be sealed
  • Cures to a hardness similar to cement grouts
  • Can be used on virtually all types of tile and natural stone
  • Crack and chemical resistant
  • For grout joints 1/16 in. - 1/2 in. (1.6 - 13 mm) wide
  • For use on countertops, tub surrounds, showers and high traffic areas
  • Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques
  • May qualify for a lifetime system warranty when combined with other custom lifetime warranty installation products



Product Overview

  • Unsurpassed stain resistance with no sealing required
  • Ultimate color consistency
  • Easy to spread and clean
Model #: FP3331-2T
Sku #: 896774
Internet #: 203705523

Custom Building Products #333 Alabaster 1 Gal. Fusion Pro Single Component Grout is a professional grade, single component sanded grout. Fusion Pro requires no mixing and is ready to use on ceramic, porcelain, glass tiles and polished natural stone. It is suitable for exterior and interior wall and floor use.

California residents: see   Proposition 65 information

  • Advanced acrylic plus silicone resin formulation
  • Provides superior color consistency
  • Includes microban antimicrobial product protection to inhibit the growth of stain causing mold and mildew on grout
  • Easy to use, won't effloresce, spreads easily, saves time because it doesn't need to be sealed
  • Cures to a hardness similar to cement grouts
  • Can be used on virtually all types of tile and natural stone
  • Crack and chemical resistant
  • For grout joints 1/16 in. - 1/2 in. (1.6 - 13 mm) wide
  • For use on countertops, tub surrounds, showers and high traffic areas
  • Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques
  • May qualify for a lifetime system warranty when combined with other custom lifetime warranty installation products



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Maximum coverage area (sq. ft.)
605
Product Width (in.)
7.75

Details

Color
Alabaster
Color Family
Beige
Commercial / Residential
Commercial / Residential
Dry time (hours)
24
Floor/wall use
Floor and wall
Flooring Material Features
Mold/mildew resistant,Sanded,Stain resistant
Flooring Product Type
Grout
Flooring Use Type
Tile
Indoor/Outdoor
Indoor/Outdoor
Mold/mildew resistant
Yes
Product Weight (lb.)
16.5lb
Product type
Single Component
Returnable
90-Day
Sanded
Yes
Stain Resistant
Yes
Use Location
Countertop,Exterior wall,Floor,Interior wall,Shower,Tub surround

Warranty / Certifications

Lifetime Warranty
Yes
Manufacturer Warranty
1 Year Product

Specifications

Dimensions

Maximum coverage area (sq. ft.)
605
Product Width (in.)
7.75

Details

Color
Alabaster
Color Family
Beige
Commercial / Residential
Commercial / Residential
Dry time (hours)
24
Floor/wall use
Floor and wall
Flooring Material Features
Mold/mildew resistant,Sanded,Stain resistant
Flooring Product Type
Grout
Flooring Use Type
Tile
Indoor/Outdoor
Indoor/Outdoor
Mold/mildew resistant
Yes
Product Weight (lb.)
16.5lb
Product type
Single Component
Returnable
90-Day
Sanded
Yes
Stain Resistant
Yes
Use Location
Countertop,Exterior wall,Floor,Interior wall,Shower,Tub surround

Warranty / Certifications

Lifetime Warranty
Yes
Manufacturer Warranty
1 Year Product

Questions & Answers

This grout left a terrible residue and discolored my tiles! HOW do I get this off!

Asked by: leanna
I haven't used the product, but if it is latex-based, a highly basic liquid may soften it. Sodium Hydroxide (the main ingredient in "Main Line" plumbing clog remover) or trisodium phosphate are both strong bases, and solutions of these may work.
Answered by: MM
Date published: 2017-08-04

Does this grout need to be sealed?

Asked by: ChrisDiMarioo
I would seal this grout or buy a different brand. I had my bathroom remodeled and the contractor used this grout to tile my shower. Had mildew stains on the floor within two months. Contractor cleaned and reapplied the grout, swore up and down it didn't need to be sealed. Well as you can see from the picture not six months later the mildew is worse.
Answered by: crimay
Date published: 2017-11-07

Is Fusion Pro sold in 1/2 gallon or quart size?

Love this product and we have 1/2 a shower wall to grout so don;t wan to buy another gallon. Is their a 1 qt size?
Asked by: Tandem
is it sold in half gallon size
Answered by: bob
Date published: 2017-08-27

will this product also stick to wood?

I am installing tile next to wood, will the epoxy grout also stick to the adjoining wood floor at the marriage line?
Asked by: Suz52
Yes. I installed a granite tile countertop and used red oak as trim around counter edge. Before grouting, I stained the wood and sealed it and then masked it off with tape. I've had it installed about a month, now, and all looks well.
Answered by: nzpete
Date published: 2016-10-14
  • y_2017, m_12, d_10, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_117
  • loc_, sid_203705523, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 120ms
  • QUESTIONS, PRODUCT

Customer Reviews

Fusion Pro #333 Alabaster 1 Gal. Single Component Grout is rated 3.5 out of 5 by 552.
Rated 5 out of 5 by from People seem to dislike this grout but they would have a better experience if they were prepared. ... People seem to dislike this grout but they would have a better experience if they were prepared. Buy 2-3 of the large orange HD buckets and 6 tile sponges. Fill your buckets with cool water and toss 2 sponges in each bucket. Open your grout and apply a generous amount of water with a clean sponge on the a small area you plan to grout, not just the gaps but the entire tile surface. If you used enough water then the Fusion Pro will spread nicely, use too little and it will be like spreading corn flakes and it will fall of off your float. spread the grout on the gaps of two 12x12 tiles max and then use a clean sponge to wipe the excess (lightly) and then toss that sponge in a bucket and use a clean one to repeat, then do the same with a third. Wring our the sponges and then repeat until you are finished, it goes faster than you might imagine. Leaves nice clean lines and cures fast.
Date published: 2017-06-13
Rated 5 out of 5 by from Perfect for DIY grouting! I am a 28 year old female who used this to grout my bathroom tile floor. I have to say I was very worried as I have never used grout before, but this was just too easy! Some places did leave indentions or bubbles (could have been my fault), so i just went over it again and it looks perfect! I totally recommed this product!
Date published: 2017-06-29
Rated 3 out of 5 by from I picked this up to grout a fireplace surround with a lot of tilework as it's advertised to not n... I picked this up to grout a fireplace surround with a lot of tilework as it's advertised to not need sealing and sealing around all those small tiles was going to be time consuming. While the no sealer was a plus, application of this product was very difficult. It's consistency seems like it should be ok to spread, but in practice I found that it tended to be sticky. I tried three different grout floats including a fairly stiff one and just couldn't get a good result across the tops of the tiles. I had to use what I considered a very large amount of pressure to prevent leaving behind a thin (0.5 to 1 mm) thick layer of grout on the tile faces. Now some of this could have been the small fired clay tiles (2"x2" and 2"x4" primarily) I was using, but I don't think this was the primary cause. Because I had a lot of grout on top of the tiles, the clean up was much much longer than it should have been and I ended up having to buy a grout haze remover to get the last of it off. So I gave it an average rating as the marketing and documentation makes it seem like it applies just like normal grout (other than the notice to work in small areas, which I did). The videos on the CBP website for the Fusion show the guys just floating along like it's no big deal which I definitely did not experience. I gave it a no recommendation based on my experience, but it might be fine for someone else working on a more traditional installation with 12" glazed ceramic. I would definitely not recommend this for tile with any kind of surface texture other than perfectly smooth or unglazed tile (though the product sheet says it'll work for Saltillo, etc). About me: I'm a competent DIY guy and have laid probably 4000 to 5000 sq ft of tile in my own houses and for family including lots of natural slate and several showers. So my review reflects my experience which may not be the same as a professional tile installer.
Date published: 2017-08-29
Rated 3 out of 5 by from I bought this product on the sales hype that once applied no sealer was ever required, this part ... I bought this product on the sales hype that once applied no sealer was ever required, this part may be true. I would never waste $55. again on this product here are my reasons! Over priced, very difficult applying to walls with out sagging was very easy results with the slightest of moisture. Stains easy when allowed to contact work area and area components like the shower base. Time consuming compared to standard grout I have used, plus I had a 40 year experienced tile veteran helping, his comments I omitted. Requires a dedicated product for removal if not properly cleaned off in time, also a Custom Building product item. If your doing a floor then that changes some of my reasons of dislikes about it. The next day I went to buy the only product listed to clean up areas was the Aqua-mix, the HD associate said most all of the installers will only use this grout on floors. So I'm passing along the same suggestion. Good luck on your project and reading my review.
Date published: 2017-11-08
Rated 2 out of 5 by from After reading many reviews both good and bad I thought I would try this on a new bathroom floor i... After reading many reviews both good and bad I thought I would try this on a new bathroom floor install. I installed a marble mosaic 13 x 13 floor tile. I have installed tile many times and have always used a traditional sanded or unsanded grout. This grout is somewhat difficult to use. The instructions state to only do a small area at a time. This is a must, the grout begins to dry very quickly. I would not do more than a 2' by 2' area or less at a time. At least with mosaic tile. It is more difficult to wipe up verses a traditional grout. It takes lots of water to get it off the tile. The manufacturer suggest using as little water as possible to wipe up excess grout as the extra water could dilute the binder in the grout causing it not to work as directed. But you need a lot of water to get this grout off the tile. After about 2 weeks the grout is not as hard as a traditional cement based grout. It is hard but pushing on the grout with a screwdriver with some force you can push the blade of the driver into the grout. This may not be a problem and may even help prevent cracks however I would have thought it would harden like traditional grout. The overall floor looks good. However I would not use this product again.
Date published: 2017-08-01
Rated 5 out of 5 by from Second time using I used this product first about 6 years ago and still see the great results from that shower wall project, which looks like the day applied. So once again I had another shower wall to tackle and remembered it would take some patience again to work with, but decided it was well worth the extra elbow grease. I am not a pro, just a female DIYer that is not afraid to try most any project. Take your time, use a small float for more detail and do very small areas at a time. Don't get to wet while trying to wipe it off and concentrate on cleaning each tile seperately so you won't have too much problem later. I would use this product again for never having to worry about the grout later on. Stays looking wonderful!
Date published: 2017-06-22
Rated 5 out of 5 by from Have used this product for our mudroom tile and kitchen backsplashes. Recently used for walk in s... Have used this product for our mudroom tile and kitchen backsplashes. Recently used for walk in shower. EXCELLENT durability. Our freezers thawed in the mudroom and, unfortunately, the freezer liquids (including thawed beef) ran over the tile. It cleaned up with dishsoap and water with no staining. I am thoroughly impressed as a homeowner. Trick is to do only as much as you can finish in one session and thoroughly wipe excessive, gently, as you go. No sealing required.
Date published: 2017-07-25
Rated 5 out of 5 by from If you follow the instructions it's great. It's a slower process than using regular grout so I c... If you follow the instructions it's great. It's a slower process than using regular grout so I can see why certain contractors might not like it. Keep the several buckets of clean water and don't spread more than 2 mins before cleaning. The results are even and consistent.
Date published: 2017-11-01
  • y_2017, m_12, d_10, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_552
  • loc_, sid_203705523, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 116ms
  • REVIEWS, PRODUCT