#1 Home Improvement Retailer

Internet #301853187

Model #FP386QT-4

Fusion Pro #386 Oyster Gray 1 qt. Single Component Grout

  • Unsurpassed stain resistance with no sealing required
  • Ultimate color consistency
  • Easy to spread and clean
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Stain proof and color perfect

Stain Proof and Color Perfect

Fusion Pro grout blocks stains while staying vibrant.

Fusion Pro product image

Fusion Pro

The original and patented single component grout.

Step 3 to lifetime warranty

Lifetime Warranty Installation System

Use qualifying Prep, Set and Grout products to get a lifetime warranty on your tile installation.

Spilled wine on tile floor

Unsurpassed Stain Resistance

Fusion Pro grout has the ultimate protection against stains.

white subway tile

Never Needs Sealing

Fusion Pro comes with stain proof power and doesn't require a sealer.

Two pails of same color grout

Ultimate Color Consistency

Color is consistent from bucket to bucket, batch to batch.

Spread grout with float

Easy to Spread and Clean

Fusion Pro comes ready to use and clean up is a breeze.

check mark

Ready to Use

Ready to use, No mixing

grout joint thickness

For Various Joints

For all joints 1/16 in. to 1/2 in.

Several types of tile applications

Horizontal and Vertical

Floor and wall applications

Inside and outside

In and Outdoors

Interior or exterior applications

Water drop on tile

Use in Wet Areas

Wet applications including showers

MicroBan

Prevent Mildew

Contains MicroBan

Fusion Pro the original stain proof, color perfect grout. This professional grade sanded grout features unsurpassed stain resistance with no sealing required. Its Single Component formula is ready to use and easy to spread and clean. Fusion Pro can be installed in commercial and residential environments, interiors and exteriors, and on walls and floors and specifically shower floors. Its patented formulation can be applied on all tiles and has built-in Microban antimicrobial product protection.
  • Use to fill joint widths 1/16 in. to 1/2 in.
  • Can be used on virtually all types of tile and natural stone
  • Use on countertops, tub surrounds, shower walls and floors and high traffic areas
  • Cures to a hardness similar to cement grouts
  • Crack and chemical resistant
  • Resealable container
  • No efflorescence
  • Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques
  • May qualify for a lifetime system warranty when combined with other custom lifetime warranty installation products
  • No efflorescence
  • Sample colors shown may vary from actual grout; final installed shade can differ based on tile type, porosity, job site conditions and finishing techniques
  • May qualify for a lifetime system warranty when combined with other custom lifetime warranty installation products
  • Visit the How to Grout Tile Project Guide for tips on completing your grout project
  • Check out more grout products from Custom Building Products to find the best fit for your tile project
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Grout

current product
Fusion Pro #386 Oyster Gray 1 qt. Single Component Grout
Fusion Pro #11 Snow White 1 qt. Single Component GroutFusion Pro #544 Rolling Fog 1 qt. Single Component GroutFusion Pro #145 Light Smoke 1 Gal. Single Component Grout
BrandCustom Building ProductsCustom Building ProductsCustom Building ProductsCustom Building Products
NameFusion Pro #386 Oyster Gray 1 qt. Single Component GroutFusion Pro #11 Snow White 1 qt. Single Component GroutFusion Pro #544 Rolling Fog 1 qt. Single Component GroutFusion Pro #145 Light Smoke 1 Gal. Single Component Grout
Price
Ratings
(849)
(849)
(849)
(1543)
Product typeSingle ComponentSingle ComponentSingle ComponentSingle Component
Flooring Material FeaturesAntimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Sanded,Stain resistantAntimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Sanded,Stain resistantAntimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Sanded,Stain resistantAntimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Sanded,Stain resistant
Maximum coverage area (sq. ft.)157157157627
LocationBathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surroundBathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surroundBathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surroundBathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surround
Indoor/OutdoorIndoor/OutdoorIndoor/OutdoorIndoor/OutdoorIndoor/Outdoor
Flooring Product TypeGroutGroutGroutGrout
View ProductView ProductView ProductView Product

Specifications

Dimensions

Maximum coverage area (sq. ft.)
157
Product Width (in.)
5

Details

Color
Oyster Gray
Color Family
Gray
Commercial / Residential
Commercial / Residential
Dry time (hours)
24
Flooring Material Features
Antimicrobial,Moisture resistant,Mold/mildew resistant,No mixing required,No sealing required,Premixed,Sanded,Stain resistant
Flooring Product Type
Grout
Flooring Type
Cement,Ceramic,Glass,Porcelain,Stone,Subway,Tile,Vinyl
Indoor/Outdoor
Indoor/Outdoor
Location
Bathroom,Countertop,Exterior wall,Floor,Interior wall,Kitchen Backsplash,Shower,Tub surround
Product type
Single Component
Returnable
90-Day

Warranty / Certifications

Lifetime Warranty
Yes
Manufacturer Warranty
Eligible for Lifetime Warranty

Questions & Answers

101Questions15Answers

Will this adhere to damaged grout?

Asked by Tina April 11, 2021
1
Answer

Fusion Pro Single Component Grout is not recommended for use over damaged grout. For further assistance please contact us at 1 800 282 8786 option 2.

Can i use this peoduct between shower pan and tiles (change of place) ?

Asked by Jay March 15, 2021
2
Answers

To better have your question answered, please call Custom Building Products at 800-282-8786.

Can this be used on marble floor tiles?

Asked by Cara February 26, 2021
3
Answers

Product says it works best on non-porous material. I used it on shiny marble tiles and it worked great. Just takes time to get used to using the product.

Is this paintable?

Asked by Kadi February 22, 2021
2
Answers

Fusion Pro Single Component Grout is not intended to be painted. However, it is compatible with grout colorants like Polyblend Grout Renew Colorant. For further assistance please contact us at 1 800 282 8786 option 3.

Can this be used for vinyl tiles?

Asked by abecker February 15, 2021
2
Answers

Yes! We have used it on 3 different properties with the groutable peel and stick vinyl tiles with great success. Keep in mind though, if you have a "flood" (e.g. overflowing washing machine) water can still migrate into little pin holes, or along the wall seam and get under the tiles. The great thing is, you could lift up a couple of tiles, let the floor dry, glue the tiles back down and re-grout. Oila! No noticeable damage!

Is this okay to use in a glass block shower? How long does the shower need to dry out before using this product?

Asked by Jennifer February 5, 2021
1
Answer

In order for us to give you the best possible answer, we would like to know a few more details regarding your project. For further assistance please contact us at 1 800 282 8786 option 2.

Can this be used on a glass block window in the shower? And can this be used over existing grout?

Asked by KMP1 January 9, 2021
1
Answer

You should be able to use this on glass block. To go over existing grout you need to remove any loose or cracking grout and also scrape out as much as you can. The new grout needs to be able to go in between the tiles otherwise it will just fall off. You can buy a cheap tool to scrape it out but be careful so you don’t scratch your tile. Before regrouting you should clean it all with vinegar and water and let it dry thoroughly before starting with the new grout.

Will it be okay to seal the grout along with the porcelain tile?

Asked by Ronbo January 2, 2021
1
Answer

Fusion Pro Single Component Grout does not require sealing. However, if the surrounding tile is going to be sealed, please allow the grout to cure a full seven days prior to sealing with a water-based penetrating sealer. For further assistance please contact us at 1 800 282 8786 option 3.

Can this sanded grout be used for both wall tiles w 3/16" gaps and floor tiles with varied gap si...

Asked by MT September 29, 2020
1
Answer

Fusion Pro Single Component Grout suitable for use in 3/16" joints. However, Fusion Pro Single Component Grout is incompatible with pebble mosaics. We would suggest the use of our Prism Grout for pebble mosaics where joints are within 1/16" - 1/2". For further assistance please contact us at 1 800 282 8786 option 2.

Can i use this on my pool tile?

Asked by PapaJ September 13, 2020
1
Answer

Fusion Pro Single Component Grout is not suitable for use in a pool. For further assistance please contact us at 1 800 282 8786 option 2.

Fusion Pro #386 Oyster Gray 1 qt. Single Component Grout - page 2

Customer Reviews

  • 4.3
    out of 850 reviews
  • 76% recommend this product
Filter by:
Showing 1-10 of 850 reviews
Follow directions and mix well
First and foremost, this herringbone project was time consuming and took some effort. Cut 12x12 Carrara Marble peel and stick vinyl tiles to 3x12. Arranged pattern to my liking using 1/8 leave in tile spacers (remove before grouting with vinyl peel and stick!!!!) that I cut to t and straight line pieces with a cutter. Used Fusion Pro artic white grout afterwards. This grout is different to use at first but follow directions and make sure to mix well first (my early troubles stopped after thorough mixing) and it becomes quite easy.
by Tal
1 person found this helpful
Looks nice, but not incredibly to work with.
I am glad I didn't have a larger area to do because this took quite a while. You need to work quickly but I found this so difficult to spread and fill the lines. This is my first time with pre-made grout so maybe they're all this thick and dry. I will use traditional grout next time. Overall though the results do look nice.
by Amber
1 person found this helpful
I would have given this product 5 stars except for 2 reasons: (1) it's unavailable in the store i...
I would have given this product 5 stars except for 2 reasons: (1) it's unavailable in the store in the quart size so i had to wait for the product to come in, which delayed my project and (2) one of the quarts was dried out and unusable. Luckily, it only took 1 quart to do the job. I will be returning the quart that arrived dried out, but I would have been bummed out if I had needed that second quart. The gallon size would have been way too much for my kitchen backsplash. You do need to follow the manufacturer's directions because this stuff does dry quickly. We had a 3 person team: one grouting, one wiping and one rinsing out the sponges and microfiber cloths, plus doing the inspection for any spots we missed or areas that needed touch up or a do-over. The finished product looks fabulous and I couldn't be happier with the results. I would recommend this product and would use it again since it is pretty much an apply, wipe off and you're done job...no sealing, no repeated rinsing, no haze removal! I just wish it was stocked in the store.
by HomeDepotCustomer
3 people found this helpful
Work fast and small areas. This product dries fast. Get the film off asap. Durable. Utilized fo...
Work fast and small areas. This product dries fast. Get the film off asap. Durable. Utilized for kitchen countertops as well as bath.
by Ren
2 people found this helpful
Well that was my first experience with a "high-quality" grout. I would not use this product agai...
Well that was my first experience with a "high-quality" grout. I would not use this product again. Between the 3 week wait to receive it (I am not even considering that as bad because it is covid time when this order was made) and the cracking it is not worth it. I wish I had kept the container to see if it was out of date or something but the trash was already picked up. I noticed the cracks 2 days later. - small cracks but obviously the grout did not bond properly and I would bet more bonds will fail with use. Yes the entire area was clean and dry. I feel ripped off since I could have just bought an entire bag of Mapei FA for less than this item.
by Chance
9 people found this helpful
Easy to Use!
I have never before installed tile, let alone touched grout. I was nervous about self mixing it, and messing up the grout color, so the fact that this comes ready to go is great! I was not aware of the difference between sanded and non sanded grout, so I chose this product because it appeared durable. Even on shiny subway tile, the sand did not scratch the finish or stain the white tile with the grey of the grout. The grey matched my cabinet paint color and looks clean and professional. If this is your first project, I suggest using this product!
by Mary
5 people found this helpful
This product is not for the faint of heart if...
This product is not for the faint of heart if you are a DIY’er. Definitely follow the instructions and make sure your sponge is moist not damp as otherwise you will be cleaning up more than needed. And a terry cloth towel is a must! I’m not a pro, but I have been laying complex tile jobs for years and believe me this one wasn’t complex. I usually use a competitive pre-mixed quartz enhanced product but this time due to covid 19 my supplier was closed. So I bought this to try it out and get my job done. The product worked and dried and resulted in a great looking job. But it was not as easy to spread or clean up. This resulted in a 45-minute job taking nearly 2-hours. Again no other complaints but read and follow all directions first for this product.
by Michigan69
4 people found this helpful
We did part of our project well over a year ago (maybe two years ago), and this was the grout we ...
We did part of our project well over a year ago (maybe two years ago), and this was the grout we used. When we pulled it out to finish the project, we found that the remaining grout was too dried out to use. We ordered more, a bit worried about how well it would match the last batch, but it matched perfectly. So far, we have found this grout to perform well.
by DIYitall
This grout was disaster!
I still finish with apply this grout on backsplash but it’s was disaster! Maybe this grout was old or something happing with this this grout but it’s look like this grout was a little dry...what gave for me most terrible time and experience with this grout! I apply this grout on 25 sq.ft backsplash about 5 hours!!!! Just because after apply it’s dry for 2 minute, this grout was most terrible and hard for apply and for sure I never will buy again this grout! Picture of done work I will upload here too! If you like my work you can see more on https://shax.us
by SHAXfamily
2 people found this helpful
I recently did my shower. I used 18 x 18 tile with 1/16 grout lines. It is easy to use premixed s...
I recently did my shower. I used 18 x 18 tile with 1/16 grout lines. It is easy to use premixed straight out of the container. Lightly sanded so it worked on the small grout lines.Cleanup is a little more difficult than standard grout. The biggest problem is the smell. It has a very noticeable smell and it takes several weeks to go away. It has been about a month 1/2 the smell is slight but still there. The next project is the bathroom counter, I haven't decided if I will use it again.
by Woodchucker
6 people found this helpful
Showing 1-10 of 850 reviews