Internet #202562817

Model # 10004

Store SKU #465121

Store SO SKU #1000395437

0037155014927

DANCO

1-Handle Valve Trim Kit for Delta Tub/Shower in Brushed Nickel (Valve Not Included)

  • Allows you to update your faucet without replacing the valve
  • Compatible with #70 ball, #212 ball and scald guard style faucets
  • Gives a clean and finished look to your tub/shower
$ 46 98
Loading Options
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

+
+

Product Overview

  • Allows you to update your faucet without replacing the valve
  • Compatible with #70 ball, #212 ball and scald guard style faucets
  • Gives a clean and finished look to your tub/shower
Replacing the trim on your bathroom fixtures is an easy do-it-yourself project. This DANCO Tub/Shower Trim Kit for Delta allows you to make updates without replacing the valve. This Trim Kit replaces the Delta 600 series and Delta Monitor 14 series. It includes adapters to fit #70 ball or #212 ball. This Trim Kit offers you a choice of design between a clear acrylic handle and a brushed nickel finished metal handle. The plastic construction provides durability and the stainless steel material provides reliable performance.
  • Durable plastic and stainless steel construction gives strength and reliability
  • Replaces Delta 600 series with and without diverter in brushed nickel (#70 or #212 ball)
  • Replaces Delta monitor 14 series (without volume control) and without diverter in brushed nickel
  • Includes adapters to fit most Delta tub/shower faucets
  • Compatible with #70 ball or #212 ball faucets
  • Includes 1 clear acrylic handle and 1 brushed nickel finished metal handle
  • Gives a clean and finished look to your tub/shower
  • Installs with simple household tools making this an easy do-it-yourself project
  • Note: to properly install this product, you need a 3-1/2 in. opening in the wall for the offset portion of the trim plate to sit back in, or else it will stick out from the wall



  • California residents see Prop 65 WARNINGS

Product Overview

  • Allows you to update your faucet without replacing the valve
  • Compatible with #70 ball, #212 ball and scald guard style faucets
  • Gives a clean and finished look to your tub/shower
Model #: 10004
Sku #: 465121
Internet #: 202562817

Replacing the trim on your bathroom fixtures is an easy do-it-yourself project. This DANCO Tub/Shower Trim Kit for Delta allows you to make updates without replacing the valve. This Trim Kit replaces the Delta 600 series and Delta Monitor 14 series. It includes adapters to fit #70 ball or #212 ball. This Trim Kit offers you a choice of design between a clear acrylic handle and a brushed nickel finished metal handle. The plastic construction provides durability and the stainless steel material provides reliable performance.

  • Durable plastic and stainless steel construction gives strength and reliability
  • Replaces Delta 600 series with and without diverter in brushed nickel (#70 or #212 ball)
  • Replaces Delta monitor 14 series (without volume control) and without diverter in brushed nickel
  • Includes adapters to fit most Delta tub/shower faucets
  • Compatible with #70 ball or #212 ball faucets
  • Includes 1 clear acrylic handle and 1 brushed nickel finished metal handle
  • Gives a clean and finished look to your tub/shower
  • Installs with simple household tools making this an easy do-it-yourself project
  • Note: to properly install this product, you need a 3-1/2 in. opening in the wall for the offset portion of the trim plate to sit back in, or else it will stick out from the wall



  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Details

Color Family
Nickel
Color/Finish
Brushed Nickel
Fits Faucet Brand
Delta
Material
Plastic
Plumbing Part Type
Trim Kit
Returnable
90-Day
Trim Type
Valve Handle

Warranty / Certifications

Manufacturer Warranty
Limited 1 Year

Specifications

Details

Color Family
Nickel
Color/Finish
Brushed Nickel
Fits Faucet Brand
Delta
Material
Plastic
Plumbing Part Type
Trim Kit
Returnable
90-Day
Trim Type
Valve Handle

Warranty / Certifications

Manufacturer Warranty
Limited 1 Year

Questions & Answers

Is the faceplate plastic?

The description says plastic and metal. The knob is acrylic and the lever handle is described as metal, is the faceplate behind the knob/lever metal or plastic?
Asked by: leucine3
The face plate is plastic, with a chrome finish. The sleeve that covers the shower valve is the same plastic, with the same chrome (like?) finish. My eye could not see the difference between those materials and the metal handle.
Answered by: Chris
Date published: 2018-07-28

I am looking to replace my current Delta shower handle. Currently you get hot water turned to th...

I am looking to replace my current Delta shower handle. Currently you get hot water turned to the left and cannot vary the output of the stream of water. Will this handle move to left for hot water and up and down to increase / decrease the intensity of the stream? Do I have to replace the valve to accomplish this ???? Thanks
Asked by: Rose
You do not have to replace the entire valve but you would have to change the cartridge to a 17 series Delta and then install appropriate trim. If you purchased a Delta shower valve that has separate temperature control the cartridge and trim would be included but you would not need to change the rough-in valve body.
Answered by: plumbingcontractor
Date published: 2018-01-21

I need a trim kit with shower diverter for Delta

I think my bah/shower faucet is a Delta Model 600. The shower diverter is a not mounted on the tub spout. Instead the shower diverter pokes through the trim ring and connects to the rough-in mixing valve. Does this kit have a hole for the shower diverter? Is there another trim kit that will work for me?
Asked by: James
Thank you for your inquiry. It is hidden by the handle in the picture, but yes, there is a hole for the diverter. The diverter is not included though.
Answered by: DancoSupport
Date published: 2017-03-28

Does this work for Posi-Temp valves?

Doing a bathroom remodel and had this in prior. Not sure if I need to buy a new one?
Asked by: Chris
Thank you for your interest in Danco products. Our Danco 10004, Single-Handle Valve Trim Kit for Delta Tub/Shower in Brushed Nickel, is not compatible with the Moen Posi-Temp cartridge. You our use our Danco 10002, Single-Handle Valve Trim Kit for Moen Tub/Shower in Brushed Nickel for your application.
Answered by: DancoSupport
Date published: 2018-09-10
  • y_2019, m_6, d_16, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_, sid_202562817, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms
  • QUESTIONS, PRODUCT

Customer Reviews

1-Handle Valve Trim Kit for Delta Tub/Shower in Brushed Nickel (Valve Not Included) is rated 3.1 out of 5 by 107.
Rated 4 out of 5 by from Too expensive for the quality but it does what it... Too expensive for the quality but it does what it claims to do
Date published: 2019-04-24
Rated 3 out of 5 by from The part fit OK, but is cheap in appearance.... The part fit OK, but is cheap in appearance.
Date published: 2019-04-02
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-04-17
Rated 3 out of 5 by from 3 Star Review Rating provided by a verified purchaser
Date published: 2019-05-08
Rated 2 out of 5 by from 2 Star Review Rating provided by a verified purchaser
Date published: 2019-03-29
Rated 2 out of 5 by from 2 Star Review Rating provided by a verified purchaser
Date published: 2019-03-29
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2019-04-10
Rated 5 out of 5 by from fit well and looks good... fit well and looks good
Date published: 2019-05-07
Rated 4 out of 5 by from I was what we expected... I was what we expected
Date published: 2019-04-12
Rated 4 out of 5 by from Perfect way to upgrade your old Delta shower First off, I purchased this kit despite all the negative reviews I read here. I am in the process of remodeling our vintage 1980's guest bathroom and since Delta does not make a trim kit upgrade for their antique models, this Danco kit is literally the only option out there, without replacing the entire valve assembly. I knew going into this project that the Danco escutcheon was plastic (why that even matters to anyone I have NO idea…did you plan on bragging about your metal escutcheon or something???), and I understood this is a generic kit that is meant to update a few different Delta models, therefore some compromises may have to be made. Secondly, I am not a professional plumber or contractor. I'm just a weekend warrior DIY'er type, with what I would consider "slightly" better than average mechanical skill and problem solving ability. That being said, I had no problem getting this kit to install and work properly. After reading some of the problems people had, I will have chalk that up as installer error. The escutcheon plate, adapter, gaskets, sleeve, and dome/dome nut went on perfectly. Escutcheon sat flush on the tile, however I did have to use my old Delta escutcheon screws because the supplied screws are 1/4" too short. Due to the grout lines, there are tiny gaps that needed to be dealt with. I used some clear silicone to seal it, which is common practice anyway (DUH!!). The plastic white threaded grommet on the dome assembly needed to be tightened down quite a bit to prevent leaks. There is a special tool made for that, I happened to have one handy since I had just replaced the springs and seals inside the valve assembly. Not sure what it's called, but it came with the seal repair kit. I tightened it down so there was adequate tension on the ball, which eliminates a problem others have commented on in different reviews: the handle being loose and drooping down. HELLO!! It isn't Danco's fault you couldn't figure out that tightening up the ball keeps the handle from drooping! At any rate, the handle adapter went on easily, however I worried it would wiggle loose over time, so I used Locktite thread locker (the blue kind) on the set screw. Same for the handle set screw. I also used some clear silicone on the end of the handle adapter to make sure it didn't wiggle and felt solid. Turned on the water, checked for leaks. Nope, not a single drip. Been using this shower daily for a week and have not had a single issue. Overall, I think for the price, this kit is a good deal, and a great solution, considering the alternative is spending a few hundred $$$ on a new valve kit. I think the fit and finish are fine. Yes, the escutcheon is plastic, but its not the floppy, bendable kind. It's solid and well painted. It actually looks metal when its up on the wall. Nobody will ever know but you. The handle is heavy and metal, as is the sleeve and dome. I paired this up with Danco's tub spout as you can see in the photo. I did have to use an adapter plate on the spout (also made by Danco) because there was a 1/2" gap, but it all turned out well.
Date published: 2013-08-15
Rated 3 out of 5 by from First of all, the main backing plate is plastic, not metal, and it is chrome colored, not brushed... First of all, the main backing plate is plastic, not metal, and it is chrome colored, not brushed nickel. This, as you can see, does not match the picture here which is brushed nickel color. When I bought this, I had to look through the display to find a package that was not open (there were many that had apparently been returned). I wondered why so many people had returned the item. Upon installation, it becomes clear that the backing plate does not sit flush to the wall like the original. You have to remove more tile in your shower wall to make a bigger hole, so the plate (shiny plastic!) will sit flat against the wall.I decided to do this, and it worked, but I understand that many buyers will not want to risk possibly ruining their tile. The sleeve and handle are metal, and look good, and overall it looks better than the one I replaced. I believe that Delta does their own upgrade kit, all metal with markings, for a little more money, but I have heard that the sleeve might not be long enough and Delta no longer makes longer sleeves to fit their older models (information from another customer's review of the Delta product). Just seems a little overpriced for what you get, but here are not many options out there unless you want to completely switch out the whole thing.
Date published: 2019-02-19
Rated 1 out of 5 by from CHEAP PLASTIC! It may look like metal but it's not! The handle is made from some type of metal but everything else isn't. After it was on, the handle wobbled because the tolerences between the handle and the sleeve coming out are over a cm. The sleeve is too short, the screws are too short, I mentioned it's all made from plastic, and poorly at that, even the gaskets they use to take up some of the slack between the sleeve are decal/stick on and leave glue residue all over the entire assembly. Fit and finish on this product was one of the lowest I've ever placed my hands on. If you never use your shower, this might do the trick, but if you do and the handle falls off, you should have known better after the three hours it took to get it installed (oh, I had the original back on if five minutes too Danco) Pathetic product. Going to talk to the manager to have removed from the product line.
Date published: 2011-05-21
Rated 5 out of 5 by from The directions were confusing at first because they were talking... The directions were confusing at first because they were talking about three different water valves at once. You had to do Ofer the directions to determine actually which control assembly went to which.
Date published: 2019-01-15
Rated 3 out of 5 by from The set looks nice and functions/m. The only issue I... The set looks nice and functions/m. The only issue I have is that it will only turn so far so you may need to increase the temp of your water heater.
Date published: 2019-02-19
Rated 1 out of 5 by from It did not line up with the screw holes in my shower and the contractor couldn't use it. It did not line up with the screw holes in my shower and the contractor couldn't use it.
Date published: 2018-12-25
Rated 2 out of 5 by from This unit did not meet my expectations. Unlike the OEM the faceplate is made of plastic. This unit did not meet my expectations. Unlike the OEM the faceplate is made of plastic.
Date published: 2018-12-26
Rated 4 out of 5 by from Putting the adapters in was a little difficult. Good product,... Putting the adapters in was a little difficult. Good product, looks great.
Date published: 2019-03-12
Rated 5 out of 5 by from It was perfect for my tub. I’m going back to... It was perfect for my tub. I’m going back to get one for my shower!!
Date published: 2019-02-05
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2019-02-06
Rated 3 out of 5 by from 3 Star Review Rating provided by a verified purchaser
Date published: 2019-02-06
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-02-06
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-02-20
Rated 3 out of 5 by from Wrong part returned to store.... Wrong part returned to store.
Date published: 2018-12-26
Rated 5 out of 5 by from Everything in the kit GREAT... Everything in the kit GREAT
Date published: 2019-03-13
Rated 5 out of 5 by from Looks great. Perfect fit. ... Looks great. Perfect fit.
Date published: 2019-01-01
Rated 3 out of 5 by from Is not very attractive ... Is not very attractive
Date published: 2019-02-05
Rated 4 out of 5 by from Looks good... Looks good
Date published: 2019-01-09
Rated 2 out of 5 by from The product looks great once it is installed. However, the handle will not stay tight on the adap... The product looks great once it is installed. However, the handle will not stay tight on the adapter as manufactured. It loosened the first time I tried to operate the valve. I then tried to re-tighten the screw and found that it wouldn't turn either direction without stripping out the hex in the screw head. I had to remove the assembly and drill out the screw to remove the handle from the valve stem adapter. I was then able to remove, what was left of the screw, from the adapter. The problem with the lever is there is too much clearance between the sides of the channel in the lever and the stem adapter, allowing it to move back and forth and causing it to become loose. I installed small pieces of shim stock to eliminate that clearance and installed a new, better quality hex-head screw. So far it's working. To avoid this problem, you could just use the ugly, clear plastic knob included in the kit.
Date published: 2018-04-17
Rated 4 out of 5 by from Had old Delta chrome fixture and also had a new value system but would of had to install a access... Had old Delta chrome fixture and also had a new value system but would of had to install a access door to change, saw this updated trim kit and was very please with results. Needed to drill out the rusted screw on the Delta handle too. They don't supply you with a diverter push button to match but I see the diverter might be able to be remove and plug, (After that I could go with a tub diverter) Planning on removing tub and go with a walk inn shower and then will install the other new valve. If they gave you a plug or matching diverter would have given a 5 stars.
Date published: 2017-03-12
Rated 1 out of 5 by from Very poor quality I'm taking it back. This is poorly made. The handle adapter fits perfectly on the Delta monitor valve system. However, the Danco handle doesn't secure tightly to the Danco provided adapter. Seriously? Danco provides both of these parts and they don't even fit each other snug? While their screw does hold the handle onto the adapter, barely, but the handle's fitting is too big to fit snug over the adapter. So as a result, the handle wobbles like crazy. Terrible! Don't waste your time. Hey HD, dump this product!
Date published: 2015-10-21
  • y_2019, m_6, d_16, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_107
  • loc_, sid_202562817, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 113ms
  • REVIEWS, PRODUCT