5-3/4 in. Shower Drain Strainer in Brushed Nickel

A:  Thank you for your interest in Danco products and for your inquiry. Danco model number 10895 does not require an existing grid cover.

A:  Just sits over drain

A:  There is no installation. It just rests over the existing floor drain

A:  You just place it over the drain...that is it. The rubber gasket on the bottom holds it over the drain.

A:  Thank you for your interest in Danco products. This shower drain strainer just needs to be placed on top of the drain. The rubber on the underneath of the strainer will hold the strainer in place.

A:  Whenever you have questions about installation for any product purchased at Home Depot, the best answer is to stop by your local store and talk to the Pros in Customer Service. They can show you how to do it and also recommend local, licensed contractors for those installation that require more skill or tools than you might have.

A:  I've used it successfully in a shower in which the drain is off to the side. If concerned about slipping, you can attach with a waterproof adhesive.

A:  It has a rubber edge on the bottom that helps it to stay put. It is moveable, if you want it to move, but for the most part, it just stays put. We have had this in our home for 5 years & never had a "slip" problem.

A:  Water and rubber gasket floats and suction

A:  Thank you for contacting Danco. Many people use a waterproof adhesive like Danco model # 80360 to seal the shower strainer to the shower drain.

A:  You just drop it old strainer n that’s it,it prevents hair from going down n clogging the shower drain.

A:  This drain cover lies flat on top of the existing drain.

A:  it just lies flat. Held in place by gravity.

A:  This drain cover just lays on top of the drain hole. To remove simply pick it up. :-)

A:  Thank you for contacting Danco. This shower drain strainer can be removed by lifting off the drain. It simply lies over the existing drain. It can stick from various uses of soap or shampoo/conditioner but you can simply use a screwdriver at the edge to remove if needed.