$4197
Pay $16.97 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- 1500 lbs. clamping force
- 3-3/4 in. throat depth
- Parallel design provides consistent support and even pressure
- View More Details
Product Details
Specifications
Questions & Answers
7Questions
Q:I bought two 24 in parallel bar clamps & one didn't have an end stop where can I purchase one
by|May 27, 2023
1 Answer
Q:Can these be used with the Bessey KBX20 K Body Clamp Extender
by|Dec 29, 2021
1 Answer
Q:We purchase two of these. We were getting ready to do our project today and one opens easily to ...
by|Jul 18, 2020
3 Answers
Q:Can the jaws be reversed so that the clamping force is directed outward?
by|Mar 28, 2019
3 Answers
Showing 1-4 of 7
Feb 9, 2018
I am supplementing a size I don't have yet with my Bessey clamps so that is natuarally my my comp...
I am supplementing a size I don't have yet with my Bessey clamps so that is natuarally my my comparison after owning the Bessey's for a few years now. After some use I have to say the DeWalt version is pretty good. I actually like the shaft even better than the Bessey if I'm honest. No little ridges means less glue drips will stick and head movements along the rail is super smooth. When tightening the cam also seems to lock a easier which is my biggest complaint with a Bessey. The only knock is the Dewalt clamp has no hard rubber clamping surface that is also removable. Rather it's a hard plastic which will dent/mushroom if it gets dinged (say it falls of your bench) Other than sanding it smooth again you can't really replace it if it becomes damaged. They say you can never have too many clamps and I would be happy to keep filling out my collection with a few more of these.
by
Jan 29, 2018
Quick Review : As an active DIYer this was great, worked well for my projects. This lost a star b...
Quick Review : As an active DIYer this was great, worked well for my projects. This lost a star because the quick release lever did not work that often. It's like it worked when it wanted to.
More In Depth Review:
I used this clamp to clamp landscaper timber to a 2x12 piece of lumber. I was using the 2x12 as backing to stabilize the two ends. I also used this to attach 2- 2x12 pieces together. It was a little difficult only because the quick release lever was not working too well. You push the handle in or pull up to activate it but sometimes it did not work. Could be DIYERror, I probably did not loosen it to the proper setting. Either way, still a great product Once clamped, this held the work pieces together well. Very strong, made of non marring material so it did not scratch up the surfaces which is good. I have not used this in conjunction with wood glue, but I am confident this will work well, as the grip is very strong when clamped together
by
Jan 29, 2018
This 24" parallel bar clamp by DeWalt is a great clamp to have in any workshop. It is a very heav...
This 24" parallel bar clamp by DeWalt is a great clamp to have in any workshop. It is a very heavy duty, well made product. It has smooth jaws so it will not mark up your project yet it can produce up to 1500 pounds of clamping force. It has a nice 3 3/4" throat which makes it a go-to clamp for a lot of my woodworking projects. DeWalt lists this as a 24" clamp, however, it will open to a max of 25". The bar does not have any cross groves on the top like my Bessey clamps do which like to collect glue during panel glue ups. I do wish this clamp clamp had the removable clamp caps like the Bessey does but is diffidently not a deal breaker. This clamp should last for years and I will be buying more of them. Another great feature is you can change this from a clamp to a spreader fast by pulling one pin and reversing a clamp end.
by
Jan 27, 2018
Very sturdy clamp. Good throat length. The width of the clamp jaws are wider then normal thus r...
Very sturdy clamp. Good throat length. The width of the clamp jaws are wider then normal thus reducing the chance that you will dent the wood. The clamp shaft is sturdy. Very good holding power and easier to tighten than the grip style. The far end piece is movable to help position the clamp in a level position and exposes a hole in the end of the shaft that can be used to hang up the clamp. The center jaw moves easily along the shaft. The unit is heavy so it's best to set that clamp on a workbench and then lay the wood between the jaws
by
May 24, 2023
Cheap and sloppy
I’m an avid woodworker and use tons of clamps. Have a few different brands of parallel clamps and these are of the least value. No padding on the clamp faces like most other brands. Bars are solid and heavy, but the clamp heads are loose and cheap. They wobble quite a bit and had to use 3/4 of the screw to tighten despite having the heads firmly pressed against the project. Very disappointed in Dewalt clamps overall.
by
Response from DewaltProductExpertMay 24, 2023
Hello.
Thank you for your feedback regarding the Bar clamp I am sorry to hear you are unhappy with this product and would be more than happy to assist you with a resolution. If you would like further assistance, please email support at wecare@sbdinc.com and reference ticket (#7225500) so all information is easily available for the agent to assist you further.
Thanks, Maria DEWALT
Thank you for your feedback regarding the Bar clamp I am sorry to hear you are unhappy with this product and would be more than happy to assist you with a resolution. If you would like further assistance, please email support at wecare@sbdinc.com and reference ticket (#7225500) so all information is easily available for the agent to assist you further.
Thanks, Maria DEWALT
May 11, 2023
Excellent clamps, as good or better than anything out there....
Excellent clamps, as good or better than anything out there.
by
May 10, 2023
by
Apr 25, 2023
This is a very high quality clamp. In the last...
This is a very high quality clamp. In the last couple months, I have purchased a workshop worth of power and hand tools for woodworking and DIY. I'm old enough that I'm tired of my tools looking like a patchwork quilt of cheap this of one brand and falling apart that of another brand. Since I was buying most everything new, I decided to choose one brand and stick with it.
After looking at a number of brands, including some old tools of mine, I realized that the old tools in the best working condition were all DeWalt, so I decided everything I needed that I could buy from DeWalt I would.
Not only have I not been disappointed, I've been pleasantly surprised at the high quality of everything I've bought so far. This is no exception.
by
Mar 16, 2023
Great to use a good quality products...
Great to use a good quality products
by
Mar 15, 2023
by
0/0
Compare Similar Clamps
 |  |  |  | |
| Brand | DEWALT | DEWALT | WEN | BESSEY |
| Name | 48 in. 1500 lb. Parallel Bar Clamp w/3.75 in. Throat Depth | 50 in. 600 lb. Trigger Clamp w/3.75 in. Throat Depth | 36 in. x 2.5 in. Quick-Adjust Steel Bar Clamps with Throat and Micro-Adjustment Handle (2-Pack) | K-Body REVOlution (KRE) 50 in. Capacity Parallel Clamp with Composite Plastic Handle and 3-3/4 in. Throat Depth |
| Price | $4197 | $4897 | $5188 | $6997 |
| Ratings | (106) | (159) | (37) | (731) |
| Clamp Type | Parallel | Trigger | Bar | Parallel |
| Jaw Width | 3.75 | 3.75 | 1 | 2.0 |
| Clamping Strength (lb.) | 1500 | 600 | 1200 | 1700 |
| Hand Tool Type | Clamp | Clamp | Clamp | Clamp |
| Throat Depth | 3.75 | 3.75 | 2.5 | 3.75 |
| View Product | View Product | View Product | View Product |
Related Products
Explore More on homedepot.com
Bath
Doors & Windows
Flooring
Lighting
Outdoor Living
