This Nailer and Compressor Combo Kit includes our 165 psi, 6-Gallon, Oil-Free Pancake Compressor and Precision Point 18 Ga. 2-1/8 in. Brad Nailer. The pneumatic nailer features durable, maintenance-free motors, tool-free depth-of-drive adjustment for proper setting of nail heads, and a tool-free jam release mechanism for easy nail removal. The kit also includes 25 ft. of 1/4 in. air hose with a coupler and plug.
DWFP55126: 165 max psi 6.0 Gal. tank (22.7 L) and 2.6 SCFM delivered @ 90 psi pump enable long tool runtime with quick recovery
DWFP55126: 75.5 dBA noise level for a quiet work environment
DWFP55126: long-life, oil-free pump for maintenance-free operation
DWFP55126: 30 lbs. weight makes unit easy to carry and store
DWFP55126: 2 universal couplers to easily support 2 users
DWFP55126: ball drain valve for quick and thorough tank draining
DWFP12233: uses standard 18 Ga. brad nails from 5/8 in. to 2-1/8 in. long
DWFP12233: Precision Point technology: precise nail placement as a result of a smaller nose and no need to compress the contact trip to actuate the tool
DWFP12233: tool-free depth-of-drive adjustment, tool-free jam release mechanism, oil-free motor, and rear exhaust for ease of use
Hose: 1/4 in. x 25 ft. PVC/rubber blend is non-marring, lightweight, and has low memory to resist twisting and kinks
Q:Can it work well with small & large size airbrush? Does it provide water filter function to get rid of water moisture from air sucking in?
by|Nov 23, 2023
1 Answer
Answer This Question
A: The compressor offers: Air Delivery SCFM @ 40PSI 3.7and Air Delivery SCFM @ 90PSI
2.6 Please see requirements of the airbrush for compatibility. The compressor has a drain valve. We recommend after each use and most all air is released to open it allowing the rest of the air to flow out and prevent moisture buildup from the air compressor building up air.
by|Nov 28, 2023
Q:Will the compressor work with a 16 gauge finish nailer from a different brand? And does the psi go at max always or can you control the level of psi?
by|Nov 16, 2023
1 Answer
Answer This Question
A: The compressor will have an adjustable PSI. Please check the other brand's operating pressure to know if this compressor will work for you needs.
by|Nov 17, 2023
Q:Will it become damage if exposed to rain?
by|Nov 8, 2023
1 Answer
Answer This Question
A: Your air compressor is powered
by electricity. Like any other
electrically powered device, If it
is not used properly it may cause
electric shock. Never operate the compressor
outdoors when it is raining or in
wet conditions.. Never operate compressor with
protective covers removed
or damaged..
by|Nov 9, 2023
Q:My 6.0 DeWalt electric compressor has a spark inside the case when I turn it on
by|Nov 6, 2023
1 Answer
Answer This Question
A: Please contact us at WECARE@SBDINC.COM for warranty assistance.
by|Nov 6, 2023
Showing 1-4 of 164
Customer Reviews
4.6 out of 5
(1,299)
4.6
out of 1,299 reviews
81% recommend this product
5
1017
4
159
3
37
2
25
1
61
Filter by:
Showing 1-10 of 1,299 reviews
Oct 29, 2023
Very used
[This review was collected as part of a promotion.] I've had this little compressor for a while now and I have used and abused it and it still runs just like the day I took it out of the box this is why I always shop Dewalt
by
Customer review from dewalt.com
Sep 14, 2023
Don’t let its size intimidate you! It is a beast!
[This review was collected as part of a promotion.] This little pancake compressor is great. It’s small and not too heavy. I put a 3-way splitter on one of the two fittings and had four guys using 16 & 18 gauge trim nailers. It had no problem keeping up. The pressure regulator is beefy and so easy to adjust your air pressure.
by
Recommended
Customer review from dewalt.com
Jan 2, 2023
Pneumatic is cheaper holidays.
I was at the Home Depot in Elmwood Louisiana looking for a brad nailer. I saw the battery powered brad nailer for $240 online and just completely looked away, but then out of the corner out of my eye I saw this air compressor and pneumatic Brad nailer sitting on the shelf for $219 at the Harahan store in Elmwood in Louisiana and I said send the fact that I can have some projects coming up. I can’t beat that. So end it went to the basket, and off I went.
by
Recommended
3 found this review helpful
Nov 17, 2022
Review for DEWALT 6 Gal. 165 PSI Electric Pancake Air Compressor
DEWALT 6 Gal. 165 PSI Elec...
Good quality pancake aircompressor by DEWALT should be a very dependable product for most of my carpentry jobs. I will be putting this one to the test soon.
by
Verified Purchase
Recommended
1 found this review helpful
Oct 21, 2021
Buy anything else
Straight out box has to tighten up some screws and bolts, ran out for the day. Pulled it out next morning turned it on makes horrible sound, Benny piston rod... Never again.... Sent co worker to but it he paid cash no receipt..
by
Response from DewaltProductExpertNov 5, 2021
Hello
We appreciate your feedback. We would like to speak to you about the experience you had. Please contact support at WECARE@sbdinc.com and include a brief description of the issue you are having along with your contact information.
We look forward to hearing from you.
Thank you Deeris DEWALT
12 found this review helpful
Sep 15, 2021
Love it mjgtesfggghuhvvfdfgggghhhhjjh hjjgfhhjjj
Love it love it love it love it
by
Recommended
7 found this review helpful
Jul 7, 2021
Dewalt Compressor and Nailer
I would suggest not labeling the box "over $305 value" in giant letters and then charging $329 for it - I hardly feel like I got a deal now. The product itself is great, I love Dewalt tools. Quality is amazing for the price.
by
Verified Purchase
Recommended
Customer review from homedepot.ca
Mar 18, 2021
The pressure regulator manifold, the part that holds the popoff valve, a pressure gauge, a pressu...
The pressure regulator manifold, the part that holds the popoff valve, a pressure gauge, a pressure regulator and two female quick connects, turns like a steering wheel. From its proper position it turns both clockwise and counter clock wise about 30 degrees before the manifold shroud bumps into the pump housing. It appears to me that the 3/4" NPT nipple with thread dope on each end needed to be made up another round. This now requires cutting the hose clamp on the hose that goes from the manifold to the pressure switch in the pump housing, the removal of the pump housing (3 screws), the removal of the manifold shroud, turning the manifold 1 more round clockwise if possible, buy a new hose clamp and install, install the pump housing, install the manifold shroud and check for leaks. If unable to make a complete turn, a 3/4" NPT close nipple with thin jam nuts would probably work. This compressor was not assembled properly and is not up for the task of a construction site. It is not safe for this manifold to fit loosely to the tank. Also the paint job on the bottom of the tank looks like it was set down in dirt while the paint was still wet. I buffed it out a little bit
I cut a shim out of PDC board 1" by 1/2 " by 5-7/8" long and wedged it between the manifold shroud and the pump housing and ran a bead of Flex Seal glue along the shroud side of the shim. Because of the secure fit of the shroud and the manifold, this seemed to stabilize the problem. I don't consider this a heavy duty solution, but there are no leaks. I bought a DeWalt because I expected it to be Heavy Duty and well made.
by
Response from portercableProductExpertSep 15, 2021
Hello
We appreciate your feedback. We would like to speak to you about the experience you had. Please contact support at WECARE@sbdinc.com and include a brief description of the issue you are having along with your contact information.
We look forward to hearing from you.
Thank you Deeris DEWALT
Verified Purchase
16 found this review helpful
Nov 15, 2020
For its price point ($179 on sale), this is a great bundle. Compressor is light, so portable, bu...
For its price point ($179 on sale), this is a great bundle.
Compressor is light, so portable, but also powerful for its size at 165psi. Others complained that despite two air connectors that there is only one pressure gauge - definitely no big deal for me since I most often use just one connector at a time. In the event I use both the odds are that the two pneumatic tools can utilize the same psi. The regulator is as easy as it gets, merely turn knob to desired psi. Compressor is typical in terms of noise with typical vibration. Also, the hose from the tank to the air receptacles on the tank was not kinked liked others said. Only time will tell, but given the Dewalt branding I expect to be durable.
The included brad nailer is great - again, particularly for the bundle price. Pinpoint accurate and did not jam. Holds nails up to 2.25” which is flexible.
The included air hose (25’) was the biggest surprise. Nice hose, actually used instead of my existing 50’ Coleman rubber hose. Included hose lies flat, does not twist and has a 300psi burst point.
In summary, this is a very good bundle for the price. Great for DIYers and small/medium duty professionals. I am very pleased with purchase.
by
Recommended
18 found this review helpful
Oct 18, 2020
Good value, poor manufacturing quality
Overall fit for purpose compressor with a decent value for the bundle, however not impressed with the manufacturing/design quality. Hose connection from tank to pressure valve/regulator is kinked. Wonder if this is the standard assembly now. Very disappointing DeWalt... you are better than this.
by
Response from DewaltProductExpertOct 27, 2020
Hi, we're sorry to hear of the trouble you are having with the DWFP1KIT. We would appreciate the chance to speak with and assist you. Please email us at WECARE@SBDINC.COM so that we may assist you with warranty. Please also reference case #12541046. Many Thanks, Mitzy DEWALT Customer Care
The PorterCable 3-Tool Combo Kit includes our 150 psi 6 Gal. Oil-Free Pancake Compressor, 16 GA 2-1/2 in. Finish Nailer, 18 GA 2 in. Brad Nailer, and 23 GA 1-3/8 in. Pin Nailer. All nailers and staplers feature durable, maintenance-free motors, tool-free depth-of-drive adjustment with detents for proper setting of nail heads, and tool-free jam release mechanism for easy nail removal. The kit also includes 25 ft. of 1/4 in. air hose with a coupler and plug.
The DEWALT 4.5 Gal. Portable Electric Air Compressor has pneumatic wheels for easy transport around a job site. The compressor can be used to support roofing and framing nailers (not included). When storing, the air compressor can be moved to a vertical orientation to save space. Its steel construction adds increased durability. With a low operational noise level, the air compressor delivers a quiet work environment.
The Milwaukee M18 FUEL 2 Gal. Compact Quiet Compressor is designed for the professional carpenter and remodeler. This quiet portable air compressor is only 68dB(A), making it the quietest cordless compressor on the market and quieter than most corded compressors. Its compact size makes it easy to transport on, around and back off the jobsite with a low profile and stackable design. It has the run-time a professional needs to stay productive, providing up to 1,600 18-Gauge brad nails per charge. It is compatible with all M18 REDLITHIUM batteries making it easy to swap packs and keep running to finish the job.
Compressors are workhorse tools on the job site and in the work shop. Makita Air Compressors are favorites for their faster recovery time, lower noise, longer tool life and consistent performance. The Makita 1 HP, 2 Gal., Oil-Free, Electric Air Compressor (MAC210Q) features a Quiet Series Design, combining strong performance with lower noise. At only 60 dBA, its ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making and more. The MAC210Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1 horsepower induction motor that provides up to 135 psi. It also features a lightweight design (only 44 lbs.) for increased portability. The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage and on the job site. Additional features include a low AMP draw that reduces the incidents of tripped breakers at start-up, as well as an oil-free dual-piston pump designed for maintenance-free operation.