Internet #303167367

Model #DWFP5512645RN

6 Gal. Electric Air Compressor with Bonus Pneumatic Roofing Nailer

  • Compressor with global materials
  • Tool is lightweight and portable at just 30 lbs.
  • Nailer ideal for installation of asphalt roofing shingles
  • See More Details
$44412

Frequently Bought Together

+
+
Price:
$44412

Product Overview

The DEWALT DWFP55126 6 Gal. Air Compressor is designed with a high efficiency motor for easy start up in cold weather or extension cord applications. This compressor has 2 universal couplers to easily support 2 users. The DWFP55126 features a long life oil-free pump for maintenance-free operation. For a limited time get a bonus Pneumatic 15° Coil Roofing Nailer with purchase.
  • 165 max PSI 6 Gal. tank (22.7 L) and 2.6 SCFM delivered and 90 PSI pump; enable long tool run time with quick recovery
  • 75 dBA noise level for a quiet work setting
  • High flow regulator and couplers to maximize air tool performance
  • Console cover protects controls and is removable to allow easy repair
  • Outlet tube rerouted to avoid being catch point
  • Protective rubber leg covers to prevent marring
  • Ball drain valve for quick and thorough tank draining
  • Convenient cord wrap for easy storage
  • High-flow regulator for increased performance
  • DW45RN high speed valve technology drives over 10 nails per second
  • DW45RN ergonomic design is lighter than leading competitive coil roofing nailers
  • DW45RN high life engine, seals and feed system for durability and long life
  • DW45RN steel skid plates with rubber inserts protect the tool and help to stop it from sliding
  • DW45RN depth adjust wheel with numbered detents helps drive nails to the proper depth into a variety of materials
  • DW45RN 15° roofing nailer
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
17.2
Product Height (in.)
30.775
Product Width (in.)
16.6

Details

Air Delivery SCFM @ 40PSI
3.7
Air Delivery SCFM @ 90PSI
2.6
Amperage (amps)
10
Application Use
Blow Cleaning,Brad Nailing/Stapling,Finish Nailing,Hobby Nailing,Hobby Painting,Inflation
Compressor Tank Capacity (Gal.)
6 Gal.
Compressor Tank Capacity (Gallons)
6
Compressor Type
Framing & Roofing
Compressor Volume Rating
Quiet
Compressor/Air Tool Features
Oil Free Compressor
Condition
New
Decibel Rating (Outdoor)
75 dBA
Horsepower (hp)
.9 hp
Included
No additional components or accessories are included
Lubrication Type
Oil Free
Maximum Pressure (psi)
165
Portable
Yes
Power Source
Electric
Power Type
Corded Electric
Product Weight (lb.)
39.1
Reconditioned
No
Returnable
30-Day
Stage Count
Single Stage
Tank Material
Steel
Tank Style
Pancake
Tools Product Type
Air Compressor
Voltage (v)
120v
Voltage (volts)
120

Warranty / Certifications

Certifications and Listings
No Certifications or Listings
Manufacturer Warranty
1 Year Limited Warranty

Questions & Answers

88Questions15Answers

Can I use to stick frame on small jobs?

Asked by Texasborn80 October 21, 2020
2
Answers

I have used it on small jobs with no problems

Can i use this compressor with a power sander?

Asked by Joeg October 7, 2020
1
Answer

The DWFP55126 is for use with pneumatic tools that require between 1-165 psi for operation.

Can I charge this compressor for about 3 or 4 minutes after turning it on, or does it take longer...

Asked by Matt September 25, 2020
1
Answer

You can plug the compressor in. Longer it is plugged in, the fuller the tank will be (until completely full). You don't need to have the unit plugged in to provide air to the air line; until the tank is empty.

I need instructions on how to start this compressor for use with a Brad Nailer, and instructions ...

Asked by Matt September 25, 2020
1
Answer

Please contact your local Home Depot or DEWALT at 1-800-433-9258 for further assistance.

will this work for sandblasting?

Asked by nate August 4, 2020
3
Answers

I would suggest a larger compressor for sandblasting

Can it be used to blow out a sprinkler system?

Asked by Thom August 2, 2020
3
Answers

No. I have a sprinkler system too, with 19 zones. This compressor has too much pressure and not sufficient volume. You need only 5-10 psi but lots of volume to blow out the sprinkler heads. The pros use a trailer mounted compressor like they use for jack hammers.

can this be used to nail siding

Asked by Chad July 10, 2020
1
Answer

I wouldn't recommend it.

Will it fire without the safety tip

Asked by Matthew June 20, 2020
1
Answer

This has metal tip and designed for speed nailing

Does a 1 3/4 inch fencing ring shank available

Asked by LEE June 2, 2020
1
Answer

Not for this gun you need siding gun

Need 1 3/4 inch fencing ring shank 15°coil

Asked by LEE June 2, 2020
1
Answer

Look for Hitachi siding gun this is roofing only.

6 Gal. Electric Air Compressor with Bonus Pneumatic Roofing Nailer - page 2

Customer Reviews

  • 103 Customer Reviews
  • 4.2 out of 5 stars overall
89% of customers recommended.
Overall Ratings
5star-icon(65)
4star-icon(18)
3star-icon(3)
2star-icon(1)
1star-icon(16)
Sort By:
don't buy this one.
my wife bought me this coil nailer with nails to redo the roof on our home. Sofar I'm half way done and the coil nailer keeps jamming, double and triple nails at a time, and had fired nails while no one is touching it. Than God it was pointing at the garage and not my daughter or I who were the ones on the roof when that happened.
Was this helpful?
0
0
Response from DewaltProductExpertOctober 6, 2020
Hi, we're sorry to hear of the trouble you are having with the DW45RN. We would appreciate the chance to speak with and assist you. Please email us at WECARE@SBDINC.COM so that we may assist you with warranty. Please also reference case #12407133. Many Thanks, Mitzy DEWALT Customer Care
Excellent item for simple home-based operations
I chose the Dewalt 6-gallon, pancake-style compressor to replace a small, inefficient 1-gallon unit I have used for several years. The extra capacity in this model is evident when you start using your tools; I now have full pressure for a longer work period before the pump has to kick on to supply more air. It is very sturdy with rubber feet on the bottom to keep it in place yet it is still light enough to be moved where needed by the comfortable handle. Getting the included brad nailer was a bonus since I have an upcoming project with lots of trim to install. The magazine capacity for this nailer is 100, 18-gauge fasteners ranging between 5/8-inch up to 2-1/8-inch long. This lightweight tool (2.6 pounds) has an adjustable depth setting to allow the fasteners to be set flush with the finished surface or slightly recessed and/or can be set to bump/contact action for rapid nailing on flat surfaces. Should a fastener become jammed in the nosepiece, just flip open the latch on the nose door to remove. Lastly, I had to smile when I noticed that Dewalt has even included a pencil sharpener built into the belt hook.
Was this helpful?
2
0
Doesn't hold air
It does everything it's designed to do EXCEPT hold air for more than 24 hours. I will charge it up to about 150 psi, and 24 hours later there is no pressure. Every air compressor I have owned has held air, so it's ready to use without "filling". I am going to attempt to return despite not having the box... Silly
Was this helpful?
3
0
The roofing nailer work perfectly and did a very good job for us.
The roofing nailer work perfectly and did a very good job for us.
Was this helpful?
0
0
Very good item and work great
Very good item and work great
Was this helpful?
1
0
Received air compressor and it came "plug & play", fired right up, built up to 155 Lbs and shut o...
Received air compressor and it came "plug & play", fired right up, built up to 155 Lbs and shut off. After reading all comments about leaking air, I let it set for over a week before actually using it. One week later, it still had 100 Lb air still in tank, very happy about that part.Used it today and worked like a champ!. I took off sprocket and final drive motor off a mini excavator, including a couple bottom rollers that had been on since 2005 (new). All bolts also had locktight which took more power to take off. (23) tough bolts total. Very happy with this compressor. Hopefully it will last many years. The above job will be it's toughest chore that I will ever use it for, a happy camper!, so far, so good. I would recommend to any homeowner or small shop owner. The little extra boost with the PSI made the difference from the "other average size compressors" that I researched.
Was this helpful?
8
0
It is working as expected so far. Not too loud which is nice.
It is working as expected so far. Not too loud which is nice.
Was this helpful?
3
0
In the past i wasnr thrilled by dewalt air tools, but this turns out pretty good. Did a small roo...
In the past i wasnr thrilled by dewalt air tools, but this turns out pretty good. Did a small roof worked real well and its light hand doesnt get tired. also really like the easy depth adjuster
Was this helpful?
4
0
Just what I was looking for
Quality :
4
Value :
4
Seeds Program Review
(What's this)
I had been meaning to get a smaller compressor to use with my nailers for some time now, to get away from lugging around my large wheeled one, and this DeWalt model fit the bill nicely. This unit is light and compact, making it well-suited for work up on the roof, and provides ample CFM's to run my framing and finish guns. The unit arrived well-packaged, with no damage, and it's ready to run right out of the box. From totally empty, it takes just under 3.5 minutes to fill. It weighs something around 30 pounds, and with it's large carry handle and compactness, it's easy enough to lug up a ladder, or throw in the back of the truck. It's also fairly quiet - certainly a good bit quieter than the one I have been using - making it ideal for indoor use. The tripod feet, with their rubber boots, make it very stable on pitched surfaces. I did initially have some trouble getting the hose couplings to insert into the couplers deep enough to stay, but that seemed to correct itself after a bit. I must admit that the ones I'm using are discount-store quality, so they may be the issue. I did fill the tank and leave it sit overnight, and noted no discernible drop in pressure. With the features that I've touched on - the unit's compactness and portability, and it's relative quietness of operation - this unit will be perfect for my intended use, pneumatic nailing. While it also may see some use in filling tires, this unit is in no way designed or intended for use with things like cut-off tools, sanders, grinders and such. Stay with tools that don't exceed the CFM ratings of this compressor and I think you will be pleased.
Was this helpful?
26
0
Compact Air
Quality :
4
Value :
3
Seeds Program Review
(What's this)
Packaging & Assembly: Item came reasonably packaged with no damage. Open the box & remove a horizontal cardboard spacer on the top. Package contents: Fully assembled compressor & Instruction booklet. No extra cardboard or packaging inside other than the exterior box itself. First Impressions/Features: Item is lite enough to be easily portable. Plastic was used in various locations of the compressor to keep the weight down; handle & decorative panel(s). Rather than metal plumbing from the compressor pump to the tank, a hose was used. I’ve found, on other compressors, that the metal tubing becomes hot to the touch with no shielding to protect the user. This compressor uses a rubber hose. The compressor features (3) rubber feet firmly attached to the metal legs welded to the tank. The 6-gallon pancake tank sits close to the ground and is fairly sturdy against tipping. The tank also features a nicely done drain cock but it will require tipping of the compressor to drain it all out since this is not located at the lowest point of the tank. The tank & line pressure gauges are easy to read and the tank features (2) quick couplings at a 90° to each other. Onboard cord storage round out the list of basic features. Use: This compressor is average in noise level and tank filling time. The extra PSI rating over other items of similar use give this a bit of an advantage. Pricewise, they are average to slightly above average vs. other compressors of similar features. As for its intended use. Compressors of this style are not for high SCFM demand but rather shorter “burst” demands such as nail guns, tire inflation, staplers, intermittent dust blowing. This is not designed for long duration die grinding, sanding, etc… Don’t expect it to perform high-volume tasks without a fast decrease in air pressure and lengthy recovery time. If you use this for it’s designed use, you should be quite pleased with its overall performance & compact size/weight. This compressor excels in the category of portability. I would have liked to see a little on-board storage for small items like inflator chucks, needles, etc...
Was this helpful?
21
0
Review this Product
Share your thoughts with other customers