A: I cut metal with it. Just need to make sure you have the right blade and metal isn't too thick. Not sure I would personally use if for copper but I am sure it would work.
A: It will probably do it with the right blade, but not the best application for thi tool. This tool is designed for short cuts close to floor or plunge cuts.
A: yes but there are differant blades for cutting metal vs wood or plastic. You can easily find them at your local Home Depot
A: The DEWALT DCS354B oscillating multi-tool is designed for professional detail sanding, plunge cutting, flush cutting, removal of excess materials and surface preparation applications. It's compatible accessories are : Oscillating Sanding Pad Oscillating Wood with Nails Blade Wide Titanium Oscillating Wood with Nails Blade Oscillating Hardwood Blade Oscillating Fastcut Wood Blade Wide Oscillating Fastcut Wood Blade Oscillating Wood Detail Blade Oscillating Titanium Metal Blade Oscillating Semicircle Blade Oscillating Titanium Semicircle Blade Oscillating Flush Cut Blade Titanium Oscillating Flush Cut Blade Oscillating Multi-Material Blade Oscillating Rigid Scraper Blade Oscillating Flexible Scraper Blade Oscillating Carbide Grout Removal Blade Oscillating Fastcut Carbide Grout Removal Blade Oscillating Carbide Rasp
A: It depends on the thickness of the metal. With the correct blade, it is possible to cut through sheet metal and pipes.
A: Yes, variable speed is controlled by the trigger. It has many different levels of speed.
A: Yes. and ez to use. Please read the instruction before use.
A: The DCS354B does not include a belt clip.
A: I don't believe it is advised to have a belt clip on a cutting device so it is not included.
A: The Milwaukee blades would not have been tested by the manufacturer DEWALT with the tool. It would not recommended.
|Name||ATOMIC 20V MAX Cordless Brushless Oscillating Multi Tool with (1) 20V 2.0Ah Battery and Charger||20V MAX XR Cordless Brushless 3-Speed Oscillating Multi Tool with (1) 20V 2.0Ah Battery and Charger||ATOMIC 20V MAX Cordless Brushless Oscillating Multi Tool and (1) 20V 4.0Ah Battery||20V MAX XR Cordless Brushless 3-Speed Oscillating Multi Tool, (1) 20V 2.0Ah Battery, and (1) 4.0Ah Battery|
|Power Tool Features||LED Battery Indicator Light,Variable Speed||Variable Speed||Variable Speed||Variable Speed|
|Voltage (volts)||20 V||20 V||20||20 V|
|Tool Only| Kit||Kit||Kit||Kit|
|Oscillations Per Minute (OPM)||18,000||20000||18,000||20000|
|Number of Total Batteries Included||1||1||1||1|
|Battery Amp Hours||2 Ah||2 Ah|
|View Product||View Product||View Product||View Product|