#1 Home Improvement Retailer

Internet #302206439

Model #D1050CF

10 in. x 50-Tooth Steel Demon Cermet II Carbide Blade for Ferrous Metals and Stainless Steel

  • Use with a dedicated 10" low RPM metal cutting saw
  • Cuts stainless, steel stud, angle iron, flat bar, threaded rod
  • Up to 40x longer life vs standard carbide metal cutting blades
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

This is an image of Diablo's "Lead Never Follow"

Diablo Saw Blades

Dominate with Diablo circular saw blades for metal cutting applications.

This is an image of Diablo's optimized for corded or cordless saws claim.

Diablo Metal Cutting Saw Blades

Are optimized for use in corded, cordless & dedicated low RPM metal cutting saws for jobsite flexibility in metal applications.

This is an image of Diablo's cermet teeth for extreme cool cuts manufacturing

Diablo Cermet (Ceramic Metallic) Saw Blades

Introducing a safer and exclusive innovation that allows users to cut metal for up to 40x longer life versus standard carbide-tipped metal cutting saw blades.

This is an image of a Diablo cermet steel demon carbide blade.

Small Diameter Cermet Steel Demon Saw Blades

Cermet (Ceramic and Metallic) teeth provide high heat tolerances and increased hardness for superior wear and ultimate cutting life in both mild and stainless steel.

This is an image of a Diablo large diameter cermet steel demon saw blade.

Large Diameter Cermet Steel Demon Saw Blades

Cermet teeth cut through both mild and stainless steel, eliminating the need for individually dedicated saw blades, offering a one-blade solution for ultimate metal cutting performance.

This is an image of a Diablo steel demon saw blade.

Steel Demon Metal Cutting Saw Blade

With up to 40x the life of standard abrasive discs, Steel Demon delivers unparalleled performance and superior quality cuts. Steel Demon blades are specially designed for the extreme demands of ferrous metal cutting.

This is an image of a Diablo aluminum cutting circular saw blade.

Aluminum Cutting Saw Blades

Diablo’s aluminum saw blade series is ideal for corded and cordless saws when on-the-job, cutting non-ferrous metals such as aluminum extrusions, copper pipe and brass plate.

This is an image of a steel stud material application.

Ideal for

steel stud cutting.

This is an image of an angle iron material application.

Ideal for

angle iron cutting.

This is an image of a flat bar and channel cutting material application

Ideal for

flat bar and channel cutting.

This is an image of an EMT conduit cutting material application.

Ideal for

EMT conduit cutting.

This is an image of copper and brass material application.

Ideal for

copper and brass cutting.

This is an image of plastic and fiber glass material application.

Ideal for

plastic and fiber glass cutting.

Diablo's new Steel Demon Cermet blades cut both metal and stainless steel while providing 5x the cutting performance than standard metal cutting blades. By delivering the ultimate metal cutting performance and unmatched value story, this blade is a game changer for metal cutting. This blade features new, exclusive innovation with specially formulated Cermet teeth with a Triple Chip Grind Tooth Design, laser cut blade bodies, anti-vibration technology, and PERMA-SHIELD non-stick coating to deliver precise cuts with no sparks and cool, burr-free edges.
  • Newly formulated type II Cermet technology provides a high heat tolerance and increased hardness for superior wear and impact resistance
  • Exclusive cermet technology for up to 5X longer than standard carbide
  • Improved laser cut stabilizer vents trap noise and vibration for maximum stability, keeping the blade cool with accurate cuts in metal cutting applications
  • Triple chip tooth provides less sparks, burr-free finish and longer life
  • Tri-metal shock resistant brazing a 3-metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability
  • PERMA-SHIELD non-stick coating for less heat and corrosion
  • Ideal for use when cutting ferrous metals and stainless steel
  • Red saw blades are a registered trademark of Freud America, Inc.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Saw Blade Diameter (in)
10

Details

Arbor Size
1 in.
Color Family
Red
Material Cut
Metal
Number in Package
1
Number of Teeth
50
Power Tool Accessory Type
Circular Saw Blade
Returnable
90-Day
Saw Blade Material
Carbide
Tools Product Type
Power Tool

Questions & Answers

23Questions6Answers

can this blade be used in a miter saw ?

Asked by gabe January 15, 2021
0
Answers

Will this work on an evolution metal chop saw

Asked by Cw November 21, 2020
1
Answer

Looks like it will. Same 1" bore. As long as your saw is low RPM, below 1,800. The Evolution saws I've seen are 1,450 RPM so I think you're good.

can I cut stainless steel post ?

Asked by Mario November 10, 2020
0
Answers

can you use it on a 10 inch miter saw

Asked by gil October 2, 2020
0
Answers

Can this be used in 14" hot chop saw?

Asked by Chris September 17, 2020
0
Answers

Is this blade suitable for cutting Corina counter tops?

Asked by RVNVET68 September 16, 2020
0
Answers

Would this blade be suitable for cutting 11 gauge steel square tube?

Asked by CharlieM May 26, 2020
2
Answers

Yes

Will this blade cut 1/2 inch rebar

Asked by SL May 18, 2020
1
Answer

Hi SL, Yes this blade will cut 1/2" rebar.

Will this blade do a super clean cut on extruded aluminum?

Asked by germanwrench May 10, 2020
1
Answer

Hi Germanwrench, We have a 10" 84 tooth non ferrous cutting blade that will give clean cuts in aluminium. Here is the link: https://www.homedepot.com/p/DIABLO-10-in-x-84-Teeth-Laminate-Non-Ferrous-Metal-Cutting-Saw-Blade-D1084L/100660707

My table saw is a 5,000 rpm speed. The blade indicates 3,000 rpm max speed. What saw is the bes...

Asked by Rod December 20, 2019
1
Answer

Hi Rod, This blade is not designed for a table saw. It sis designed for a low RPM chop saw.

10 in. x 50-Tooth Steel Demon Cermet II Carbide Blade for Ferrous Metals and Stainless Steel - page 2

Customer Reviews

  • 4.4
    out of 55 reviews
  • 83% recommend this product
Filter by:
Showing 1-10 of 55 reviews
Great blade
Great blade diablo is great products first blade lost some teeth while cutting after a month of cutting steel diablo Warrantied and replaced that why I by diablo company stands behind their product's!
by MikeM
Great for cutting metal!
I bought this July 2 2020. Have done tons of cuts with this blade! The went to cut a piece of 11g square tubing a got some kick back looked and lost three teeth! But made some more cuts after that and blade cut smooth even after losing 3 teeth! Must have been a defect!
by
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
This thing cuts like a beast. This is my first...
This thing cuts like a beast. This is my first time using a blade like this. After years of using abrasive blades it was un-natural on my first cut to put teeth to metal, but I soon got used to it. This gives outstanding accurate clean cuts that have a clean edge. Also a side benefit is that it keeps the cut edge cool. You can handle the piece without fear of burning yourself. I am extremely pleased and will never go back to the abrasive blades. I have yet to find a downside to this blade.
by REID
Cutting polished stainless steel cladding with this and the cladding...
Cutting polished stainless steel cladding with this and the cladding turned blue. Not the smooth cool cut as advertised. Returning it
by ROMULO
Response from DiabloProductExpertApr 6, 2021
Thank you for the thoughtful input. Please know that we take our customers’ feedback seriously and will be sharing this with the team for review. In the meantime, we’d love to further discuss your experience. When you have a moment, give us a call at 800-334-4107 or email customerservice@diablotools.com.
The Diablo steel demon cermet ll carbide blade cut through 1 1/2" galvanized pipe quickly and cle...
The Diablo steel demon cermet ll carbide blade cut through 1 1/2" galvanized pipe quickly and cleanly. No over heating or tarnishing the metal.
by TomTom
by DAVID
by cptnobvious
Did not approach ability to cut steel as advertised
Purchased this product november 2020 to cut 2" pipe. Carbide teeth failed in 2-3 minutes with less than 1/4" inch deep cut. Finished cut with Diablo AMPed carbide tipped recip blade but could not achieve the smooth cut which the 10' cermet blade was purchased. This blade must be defective as a standard circular saw carbide blade will cut this pipe. Would be nice if Diblo rep would contact me to discuss.
by DJW
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Showing 1-10 of 55 reviews